Overview
High-Flow High-Temperature PC/ABS is an engineered polymer blend that combines the superior heat resistance and strength of polycarbonate (PC) with the processability and cost-effectiveness of acrylonitrile butadiene styrene (ABS). This material is specifically formulated to maintain excellent flow characteristics while withstanding elevated temperatures, making it particularly valuable for injection molding complex, thin-walled components. The development of this material addresses industry needs for faster cycle times (through improved flow) and higher service temperatures compared to standard PC/ABS blends. It achieves this through proprietary compatibilizers and carefully balanced ratios of PC to ABS, typically ranging from 70:30 to 50:50 depending on the required performance characteristics.
Physical and Chemical Properties
This PC/ABS variant exhibits a unique combination of properties with a melt flow rate (MFR) typically 30-50% higher than conventional grades (often 15-25 g/10min at 260°C/5kg). Its heat deflection temperature (HDT) ranges from 110°C to 125°C at 1.82 MPa, significantly higher than standard ABS. The material maintains good impact strength (Notched Izod typically 40-60 kJ/m²) despite its enhanced flow characteristics. Chemically, it inherits PC's resistance to many oils and greases while maintaining ABS's better resistance to stress cracking. The blend shows excellent dimensional stability with low moisture absorption (0.2-0.3% at 23°C/50% RH) and a coefficient of thermal expansion around 7-9 x 10^-5/°C. Electrical properties include a dielectric strength of 15-20 kV/mm and volume resistivity >10^15 Ω·cm.
Main Applications
The automotive industry represents the largest application sector, where this material is used for instrument panel components, HVAC system parts, and interior trim pieces requiring both heat resistance and the ability to flow into complex molds. Its UL94 flammability ratings (typically V-0 to V-2) make it suitable for electrical enclosures and connectors in consumer electronics. Industrial applications include power tool housings, appliance components, and medical device parts that must withstand repeated sterilization cycles. The material's balance of properties makes it particularly valuable for thin-wall applications (as thin as 0.5mm) where conventional plastics might fail to fill properly or lack sufficient thermal stability.
Safety and Storage
While PC/ABS is generally considered safe in finished products, processing requires precautions due to potential emissions at high temperatures. Adequate ventilation is essential when heating above 200°C, as thermal decomposition can release small amounts of styrene, butadiene, and phenol. Workers should use standard personal protective equipment including gloves and eye protection when handling molten material. For storage, the material should be kept in original packaging or sealed containers to prevent moisture absorption. Although less hygroscopic than pure PC, prolonged exposure to high humidity (above 60% RH) can affect processing and final part quality. Shelf life is typically 12-24 months when stored properly below 30°C in dry conditions.
B2B Procurement Guide
When sourcing High-Flow High-Temperature PC/ABS, buyers should clearly specify their requirements for key parameters: melt flow rate (target range), heat deflection temperature (minimum value needed), impact strength (especially at low temperatures if applicable), and any necessary certifications (UL, FDA, RoHS). Sample testing is recommended as processing characteristics can vary between suppliers. For large-volume procurement (typically >5 metric tons), consider establishing long-term agreements with pricing tied to raw material indexes. Lead times generally range from 4-8 weeks for standard grades, with specialty formulations potentially requiring 10-12 weeks. Quality control should include batch testing for consistency in flow properties and thermal performance.
Related Manufacturers
- 主营：PP、尼龙、HDPE、防火abs、LDPE、巴塞尔、晓星、台塑、大林
- 主营：改性塑料、塑胶原料、改性ABS、改性PC/ABS、PC、POM、改性PA6、改性PA66、PPO、阻燃合金、阻燃ABS、PC/ABS、PP、PA全系、改性PET、改性PC、ABS、PA6、PA66、PBT、HDPE、LDPE、PPS、PMMA、GPPS
- 主营：POM
- 主营：PA66、POM、PP、ABS、PA6、PPS、POE、PEEK、PMMA、PC、PBT、PA12、TPU、EVA
- 主营：pps加纤、pbt树脂、脱模pom、abs塑胶、abs塑料、透明abs、阻燃abs、聚丙烯、pps玻纤、pp李长荣、聚乙烯pe、工程塑料、耐水解psu、PC原料、LDPE原料
- 主营：PEI、POM、PA6、ABS耐高温高流动、PA66、PPS、LCP、工程塑料、PPO、POE、TPU、COC、EVA
- 主营：镜片料、聚苯砜、聚丙烯、聚甲醛、PA66、PA6、PPS、PBT、POM100p、Pom500p、Pom900p、M90-44、F20-03、pa9t、TPU、PPSU、PEEK、PVDF、PPA、PMMA、HIPS、LDPE、HDPE、赛刚pom
- 主营：POE、EVA、PA66、耐高温、PE、ABS、PP、LDPE、HDPE、PC、PA6、POM、PEEK、PVDF、PBT
- 主营：EVA、PP、PC、耐高温材料、PA6、PA66、POM聚甲醛、ABS、PPS、PE、PETG、PMMA、PBT
- 主营：塑胶原料、PP聚丙烯、PE聚乙烯、pc合金塑胶原料、EVA醋酸乙烯、PA尼龙6/66、PC聚碳酸酯、POM聚甲醛、ABS、PBT工程塑料、工程塑料、基础塑料、电线电缆、聚苯硫醚、电器外壳、电动工具、家用电器、电气外壳、外壳颗粒、汽车部件、熔喷料、家电部件、电子电器外壳
- 主营：TPE颗粒、ABS颗粒、PP颗粒、PC/ABS合金材料、PC颗粒
- 主营：PEEK、LCP、PA66、耐高温高流动耐热、PC、PSU、PPSU、POM、ABS、PC/ABS
- 主营：塑胶原料、工程塑料、铁氟龙、pcg-3430r、pc243r-111、PTFE、HDPE、PVDF、PC、PP、pPA6、PA66、hhm5502lw、c2950-111、聚乙烯、ppo塑胶、t-45注塑、pese2010g4、包装薄膜、电线电缆、照明灯具、蜡塑料pvc、汽车部件、耐低温热、塑料玩具
- 主营：防火阻燃PC、PA66、ABS、TPU、POM、PBT、PP、HDPE、工程塑料
- 主营：Pa66、通用塑料、工程塑料、聚丙烯、聚乙烯、POM、聚甲醛、亚克力、弹性体、EVA