Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

High Efficiency Flocculant Tablet

Updated: 2026-07-22

Overview

Polyaluminum Chloride (PAC) represents a significant advancement in water treatment technology, classified as an inorganic polymer coagulant. Unlike conventional aluminum sulfate, PAC's pre-polymerized structure enables more efficient charge neutralization and bridging effects. Industrial-grade PAC typically contains 28-30% Al2O3, with its efficacy determined by the degree of polymerization and basicity (OH/Al ratio). The flake form offers advantages in transportation and storage stability compared to liquid formulations, dissolving rapidly when added to treatment systems. Developed in the 1960s, PAC has progressively replaced traditional coagulants in many applications due to its broader effective pH range (5-9) and reduced sensitivity to low water temperatures. Modern production employs either aluminum hydroxide or bauxite as raw materials, processed through acid leaching and polymerization reactions. The product's quality is standardized under GB/T 22627-2014 in China and meets NSF/ANSI Standard 60 for drinking water treatment.

Physical and Chemical Properties

一水柠檬酸 99%含量 酸味调节剂 除垢清洗剂 污水处理用山东清海新材料科技有限公司

PAC's polymer structure [Al2(OH)nCl6-n]m (where 1≤n≤5, m≤10) gives it unique colloidal properties. The material exhibits high positive charge density (10-20 meq/g) due to its polynuclear hydroxy-aluminum complexes. Solid PAC has bulk density of 0.7-0.9 g/cm³ and dissolves exothermically, achieving complete solubility within 5 minutes at 20°C with proper agitation. Its 10% aqueous solution has pH 3.5-5.0. Key performance metrics include the Basicity Index (OH/Al molar ratio, ideally 70-75%) which influences coagulation efficiency, and the Alb content (≥70% for high-quality PAC) representing the most active polymeric species. The material shows excellent stability with shelf life exceeding 2 years when stored properly, though prolonged exposure to humidity may cause caking without significant efficacy loss. Unlike monomeric aluminum salts, PAC demonstrates lower post-precipitation of aluminum hydroxide in treated water.

商家经验真实案例 · 安全可信
镜面反射膜导电吗
本文解析镜面反射膜的导电特性,从材料构成、工业应用场景到导电性能的测试方法,帮助读者理解其是否具备导电功能及实际应用中的注意事项。

Main Applications

In municipal water treatment, PAC removes turbidity (up to 99.9%), algae, and organic matter at dosages of 5-50 mg/L, requiring 30-50% less quantity than aluminum sulfate. For industrial wastewater, it effectively precipitates heavy metals (Cu, Pb, Zn) at pH 7-8.5 and phosphates (90% removal at 20 mg/L dosage), making it crucial for electroplating and textile effluent treatment. The paper industry utilizes PAC as a retention aid and sizing agent, improving fiber retention by 15-20% compared to conventional alum. Emerging applications include sludge conditioning (reducing cake moisture by 3-5%), oil-water separation in petrochemical wastewater, and as a coagulant in cosmetic manufacturing. Special high-basicity PAC (OH/Al >80%) finds use in cold water conditions below 4°C where traditional coagulants fail.

Safety and Storage

企轩 聚丙烯酰胺PAM净水剂污泥絮凝脱水提高脱水率增加滤饼强度河南企轩净水材料有限公司

As a mild irritant, PAC requires handling with nitrile gloves and eye protection. Dust control measures are necessary during bulk loading operations to prevent respiratory irritation (TLV 2 mg/m³ for aluminum salts). Spills should be contained with inert absorbents and flushed with copious water. The material is non-flammable but may release hydrogen chloride gas if mixed with strong acids. Storage recommendations include double-layer polyethylene bags with moisture barrier for flakes, stacked no higher than 10 bags. Bulk silo storage requires relative humidity below 70% and temperature under 30°C. Liquid PAC solutions (10-12% concentration) have 6-month stability in HDPE tanks with regular agitation to prevent sedimentation. Incompatible materials include strong oxidizers and alkaline substances which may degrade PAC's polymer structure.

商家经验真实案例 · 安全可信
污垢清洗剂配方
本文探讨污垢清洗剂的常见配方组成,分析不同成分的作用原理,并提供安全使用建议,帮助读者理解清洗剂的基本构成和使用方法。

B2B Procurement Guide

Industrial buyers should prioritize suppliers with ISO 9001 certification and batch-wise quality certificates analyzing Al2O3 content, heavy metals (Pb<0.001%, Cd<0.0002%), and insoluble matter. For drinking water applications, NSF/ANSI 60 or EN 883 compliance is mandatory. Key procurement considerations include: 1) Transportation economics: Flake PAC offers 2-3 times higher active content per volume than liquid, reducing freight costs 2) Packaging options: 25kg bags with palletization for small orders vs. 1-ton bulk bags for large consumers 3) Seasonal demand: Prices typically rise 10-15% during flood seasons (June-September) in Asia due to increased water treatment demand Technical support should include jar testing protocols and dosage optimization services, especially for complex industrial effluents.

Related Manufacturers