Aicaigou LogoB2B WikiIndustrial Encyclopedia

HCT244DWR

Updated: 2026-08-16

Overview

The HCT244DWR is a high-speed CMOS octal buffer/line driver designed for digital systems. It features 3-state outputs, allowing multiple devices to share a common bus without interference. This IC is part of the 74HCT family, known for its balance of speed and power efficiency. The HCT244DWR is widely used in industrial control systems, communication equipment, and consumer electronics. Its robust design ensures reliable operation even in electrically noisy environments, making it a preferred choice for engineers.

Structure and Working Principle

SN74HCT244DWR SN74HCT244D TI德州仪器 SOP-20 驱动器芯片 原现直拍深圳市芯齐壹科技有限公司

The HCT244DWR consists of eight independent buffer gates, each with a 3-state output. These outputs can be disabled (high impedance) when not in use, preventing bus contention. The device operates on a 5V supply but is compatible with TTL logic levels. When enabled, the buffers amplify and propagate input signals to the outputs with minimal delay. The 3-state control pins allow for efficient bus management, enabling multiple devices to share the same data lines without conflict.

商家经验真实案例 · 安全可信
D882晶体管代换方案
本文针对D882晶体管替代问题,提供多种可直接替换的型号,并分析关键参数匹配要点,帮助工程师快速解决元器件缺货时的替代选择难题。

Key Features

The HCT244DWR offers several advantages, including low power consumption (typical ICC of 20µA) and high noise immunity (30% of VCC). Its wide operating voltage range (4.5V to 5.5V) ensures compatibility with various digital systems. Additional features include balanced propagation delays (typically 13ns) and symmetrical output impedance, which minimizes signal distortion. These characteristics make the HCT244DWR suitable for high-speed data transmission applications.

Application Areas

This IC is commonly used in microprocessor-based systems for address and data bus buffering. It's also found in industrial automation equipment, where reliable signal transmission is critical. Other applications include telecommunications infrastructure, automotive electronics, and test/measurement equipment. The HCT244DWR's robustness makes it particularly valuable in harsh industrial environments where electrical noise is prevalent.

Maintenance and Precautions

全新SN74HCT244DWR 缓冲器/驱动器/收发器 TI 电源管理芯片IC 批次25+深圳市尚想信息技术有限公司

To ensure longevity, avoid exposing the HCT244DWR to electrostatic discharge (ESD). Always use proper handling procedures, including grounded workstations and antistatic packaging. When designing circuits, ensure proper decoupling capacitors are placed near the power pins. Avoid exceeding the maximum ratings for voltage and current, as this can lead to premature failure or performance degradation.

商家经验真实案例 · 安全可信
旋变与编码器区别
解析旋转变压器和编码器在工业测量中的差异,从原理到应用场景,帮助读者理解两种设备的特性与选择依据。

B2B Procurement Guide

When sourcing HCT244DWR in bulk, verify the manufacturer's authenticity to avoid counterfeit components. Reputable distributors typically provide traceability documentation. Consider lead times and minimum order quantities when planning purchases. For critical applications, specify industrial-grade components with extended temperature range (-40°C to +85°C) and request samples for testing before large orders.

Related Manufacturers