Aicaigou LogoB2B WikiIndustrial Encyclopedia

HCPL2530SD

Updated: 2026-07-23

Overview

The HCPL-2530SD is a high-performance optocoupler designed for industrial and commercial applications requiring reliable signal isolation. Manufactured with a GaAs LED and integrated photodetector, it provides electrical separation between input and output circuits while maintaining signal integrity. This component is widely used in digital systems where noise immunity and fast response times are critical. Its compact DIP-8 package makes it suitable for space-constrained applications while meeting international safety standards for isolation voltage.

Structure and Working Principle

HCPL2530SD 光隔离器 FAIRCHILD仙童 封装SOP8 批号23+深圳市永芯易科技有限公司

The HCPL-2530SD consists of an infrared LED optically coupled to a high-speed photodetector chip, separated by a light-conducting insulation barrier. When current flows through the input LED, it emits light that activates the output photodetector, creating an isolated signal path. The device incorporates advanced IC design techniques to achieve propagation delays as low as 500ns, with a minimum common-mode rejection of 10kV/μs. The output stage features an open-collector configuration for flexible interface with various logic families.

商家经验真实案例 · 安全可信
多层板与铝型材连接
本文详细介绍多层板与铝型材的三种主流连接方式,包括机械固定、化学粘接和混合方案,分析各类方法的适用场景及注意事项,为工程连接提供实用参考。

Key Features

With a maximum data rate of 1MBd, the HCPL-2530SD excels in high-speed digital isolation applications. Its 3750Vrms isolation voltage rating makes it suitable for industrial power systems and motor drives where safety is paramount. The optocoupler exhibits excellent temperature stability, operating reliably from -40°C to +100°C. Its high current transfer ratio (CTR) ensures efficient signal transmission while maintaining low power consumption. The device is also resistant to common industrial noise sources due to its high common-mode transient immunity.

Application Areas

Industrial automation systems frequently employ the HCPL-2530SD for PLC I/O isolation, protecting sensitive control circuitry from high-voltage transients. It's equally valuable in motor drive circuits for gate signal isolation in IGBT and MOSFET applications. Power supply designs utilize this optocoupler for feedback loop isolation in switch-mode power supplies. The component also finds use in medical equipment, telecommunications, and automotive systems where reliable signal isolation is required between different voltage domains.

Maintenance and Precautions

HCPL2530SD 光隔离器 ONSEMI安森美 封装SOP8 批号25+深圳市欣向阳科技有限公司

Proper handling of the HCPL-2530SD involves observing ESD precautions during installation, as the GaAs LED is sensitive to static discharge. Soldering should be performed within recommended temperature profiles to prevent damage to the plastic package. When designing with this optocoupler, ensure adequate current-limiting for the input LED and proper pull-up resistors for the output stage. The device should not be subjected to voltages exceeding its isolation rating, and creepage/clearance distances must be maintained according to safety standards.

商家经验真实案例 · 安全可信
衰减器接线指南
本文详细介绍了衰减器的接线方法,包括串联与并联的适用场景、连接步骤及注意事项,帮助读者正确使用衰减器以实现信号调节。

B2B Procurement Guide

Industrial buyers should verify the HCPL-2530SD's current production status and lead times, as optocoupler availability can fluctuate. Consider purchasing from authorized distributors to guarantee genuine components, especially for medical or safety-critical applications. For large-volume procurement, request samples to validate performance in your specific application. Compare pricing tiers for different order quantities, with typical discounts applying at 1,000+ unit orders. Check for alternative part numbers or pin-compatible equivalents that may offer better availability or pricing.

Related Manufacturers