Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Handheld UV Radiometer

Updated: 2026-08-06

Overview

A handheld UV radiometer is a compact, battery-operated instrument designed to measure ultraviolet light intensity across specific wavelength ranges (commonly 250-400 nm). These devices are essential in industries where precise UV dosage matters, such as UV curing of inks/adhesives, water/air purification systems, and scientific research. Modern units often include features like spectral filtering to target UVA (315-400 nm), UVB (280-315 nm), or UVC (100-280 nm) bands separately. High-end models may offer Bluetooth connectivity for data transfer and customizable alarm thresholds for industrial process control.

Structure and Working Principle

杀菌灯紫外辐照计 LS126C 手持式紫外辐照测量仪 紫外线强度计青岛路博创科环保有限公司

The core component is a UV-sensitive photodiode or thermopile sensor that converts photon energy into an electrical signal. This sensor is typically protected by a diffuser or filter to ensure angular response uniformity and block visible/IR interference. The electronics process the signal through amplifiers and analog-to-digital converters, displaying results on an LCD screen. Some advanced models incorporate microprocessor-based compensation for temperature drift and sensor aging, improving long-term accuracy.

商家经验真实案例 · 安全可信
测距仪误差大怎么调
本文针对测距仪误差大的问题,提供三步校准法,包括环境检查、设备自检和手动校准技巧,帮助用户快速解决测量偏差问题。

Key Features

Portability is the defining characteristic, with most devices weighing under 500g for single-handed operation. Industrial-grade radiometers often meet IP54 or higher ingress protection standards against dust/moisture. Critical specifications include measurement range (e.g., 0-200 mW/cm²), wavelength selectivity (±5 nm bandwidth), and angular response (typically cosine-corrected). Some units feature interchangeable sensor heads for different UV bands or built-in timers to calculate accumulated UV dose (J/cm²).

Application Areas

In printing/packaging industries, these devices optimize UV lamp output for curing inks without under/over-exposure. Semiconductor manufacturing uses them to monitor UV exposure in photolithography processes. Healthcare applications include validation of UVGI (Ultraviolet Germicidal Irradiation) systems for surface disinfection. Environmental scientists deploy them for solar UV monitoring, while material labs use them to study UV degradation effects on polymers and coatings.

Maintenance and Precautions

紫外辐照计 手持式 UV消毒灯测定 大屏数显 辰飞环保青岛辰飞环保科技有限公司

Annual calibration against NIST-traceable standards is recommended for critical measurements. Sensors degrade with prolonged UV exposure—follow manufacturer guidelines for replacement intervals (typically 1-3 years). Always store the device in its protective case when not in use. Avoid touching the sensor window; clean only with lens-grade microfiber cloth. For UVC measurements, ensure the device is rated for short-wavelength UV, as some sensors lose sensitivity below 250 nm.

商家经验真实案例 · 安全可信
电动汽车诊断仪通讯故障检修
本文详细解析电动汽车诊断仪与车辆无法通讯的常见故障原因及检修流程,从硬件连接到软件设置,提供系统化的排查思路,帮助快速恢复设备通讯功能。

B2B Procurement Guide

Industrial buyers should prioritize models with ruggedized housings and optional calibration services if used in regulated environments (e.g., FDA-compliant sterilization). Verify measurement range covers your process requirements—UV curing may need 0-5000 mW/cm² range, while environmental monitoring requires higher sensitivity at lower intensities. Request spectral response curves to confirm wavelength matching. For multi-point monitoring, consider systems with central logging capabilities. Leading manufacturers include Solar Light Company, International Light Technologies, and UV Process Supply.

Related Manufacturers