Overview
Negative electrode graphite slurry is a critical component in lithium-ion battery manufacturing. It consists of graphite particles (the active material), conductive additives like carbon black, binders such as polyvinylidene fluoride (PVDF) or styrene-butadiene rubber (SBR), and solvents like N-methyl-2-pyrrolidone (NMP) or water. The slurry is coated onto copper foil and dried to form the anode electrode. The quality of the slurry directly impacts battery performance, including energy density, cycle life, and charge/discharge rates. Manufacturers optimize slurry formulations for viscosity, solid content, and stability to ensure uniform coating and adhesion. The choice of graphite (natural or synthetic) and binder system depends on cost, performance requirements, and environmental regulations.
Physical and Chemical Properties
Negative electrode graphite slurry exhibits a viscous, paste-like consistency with a black appearance due to the high carbon content. Its rheological properties are carefully controlled to enable smooth coating during battery production. The slurry must maintain homogeneity to prevent particle settling, which could lead to uneven electrode thickness. Key chemical properties include stability in the chosen solvent system and compatibility with other battery components. The slurry is typically non-reactive at room temperature but may release fumes when heated during drying. The dried electrode film has high electrical conductivity (10-100 S/cm) and a porous structure to facilitate lithium-ion intercalation during charging.
Main Applications
The primary application of negative electrode graphite slurry is in the production of anodes for lithium-ion batteries used in consumer electronics, electric vehicles, and energy storage systems. The slurry is applied to copper foil using precision coating techniques such as slot-die or comma coating, followed by drying and calendaring to achieve the desired electrode density and thickness. Beyond conventional lithium-ion batteries, variations of graphite slurry are used in emerging technologies like lithium-sulfur and solid-state batteries. Some formulations incorporate silicon or tin additives to increase capacity. The slurry's composition is tailored to meet specific energy density, power, and longevity requirements across different battery applications.
Safety and Storage
Negative electrode graphite slurry requires careful handling due to its chemical components. Solvent-based slurries (e.g., those using NMP) are flammable and may emit harmful vapors when heated. Water-based slurries reduce flammability but may require biocides to prevent microbial growth. Always store slurry in tightly sealed containers away from ignition sources and moisture. Personal protective equipment (PPE) including gloves, goggles, and respirators should be used when handling slurry, especially during mixing or coating operations. Spills should be contained and cleaned promptly using appropriate absorbents. Waste slurry disposal must comply with local environmental regulations, particularly for solvents classified as hazardous materials.
B2B Procurement Guide
When procuring negative electrode graphite slurry, buyers should specify technical parameters including graphite purity (typically 99.9%+ for battery-grade), particle size distribution (D50 usually 10-20 μm), and solid content (commonly 40-60%). The binder type (PVDF, SBR, CMC) and solvent system must match existing production equipment to avoid compatibility issues. Request batch-to-batch consistency data and quality certificates (e.g., MSDS, RoHS compliance). For large orders, consider on-site audits of suppliers' production and QC processes. Pricing depends on graphite source (natural vs. synthetic), solvent type, and order volume. Lead times may vary due to raw material availability, so establish long-term supply agreements for stable production planning.
Related Manufacturers
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、石墨烯导电剂、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、全氟三丁胺、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：除铁器、除磁机、永磁除铁器、电磁浆料除铁设备、电磁干粉除铁器、磁选机、电磁除铁器
- 主营：润滑剂、脱模剂
- 主营：石墨毡、电极毡、碳纤维制品
- 主营：石墨烯导电剂、香精香料、有机中间体、化工助剂
- 主营：水性色浆分散剂、涂料分散剂、油墨分散剂、硅碳负极分散剂、颜料分散剂、炭黑分散剂、墨水分散剂、粉体分散剂、润湿分散剂、油漆分散剂、喷墨墨水分散剂、无机颜料分散剂、色浆分散剂、水性分散剂、润湿剂
- 主营：硅基负极用、扣式电池切片机
- 主营：高效脱水设备
- 主营：工业酒精、无水乙醇、洗板水、异丙醇、香蕉水、天那水、稀释剂、洗网水、脱脂剂、脱漆剂、工业清洗剂、去渍油、白电油、石油醚、电子级甲醇、电子级异丙醇
- 主营：式提升机、振动提升机、煤炭振动筛、锂电负极材料研磨机、板式给料机、链板给料机、板式输送机
- 主营：碳纤维粉、碳纤维短切、芳纶短切、石墨烯、高纯人造石墨粉、芳纶浆粕、硫化锑、铜纤维、腈纶浆粕、聚丙烯腈纤维、柔性焦炭、麻纤维、木质纤维、玄武岩纤维
- 主营：水溶性炭黑、高色素炭黑、绝缘炭黑、纸板浆料用水溶性炭黑、导电炭黑、氧化铁用水溶性炭黑、中色素炭黑、低色素炭黑、混气法炭黑、氧化炭黑、勾缝美缝专用炭黑、水性油墨专用炭黑、油墨专用炭黑、乙炔炭黑、油炉法炭黑、水泥填缝水溶性炭黑、防静电塑料板用炭黑、电池专用导电炭黑、炭黑326、固化地坪用水溶性炭黑、炭黑330、发泡色母粒用炭黑、油墨用色素炭黑、涂料用色素炭黑、特黑
- 主营：兽药包装机、颗粒包装机、粉剂包装机、石墨烯浆料灌装机、液体包装机、多列包装机、颗粒灌装机、液体灌装机，、粉剂灌装机、二维码采集系统、全自动包装流水线
- 主营：高纯石墨、石墨板、石墨模具、石墨棒、石墨粉、石墨乳、鳞片石墨、土状石墨、石墨管、柔性石墨
- 主营：土耳其硼砂、五水硼砂、十水硼砂、石墨烯、无水硼砂、甘油、丙二醇、乙二醇、烷基糖苷APG、三氯异氰尿酸、聚丙烯酰胺、6501、清洗剂、AEO
- 主营：轻质碳酸钙、4A沸石粉、膨润土、石墨导电粉、重晶石粉、配重铁粉 铁砂、氢氧化钙、红陶土 黄陶土、木粉、麦饭石粉、沸石粉、煅烧高岭土、水洗高岭土、滑石粉、负离子粉、硅藻土、白云石粉、玻璃鳞片、高铝耐火粉、蓝晶石粉
- 主营：分散机、粉碎机、乳化机、石墨烯分散、反应釜
- 主营：棒销式纳米砂磨机、双动力纳米砂磨机、新能源专用纳米砂磨机、导电浆料、立式纳米砂磨机、实验室砂磨机、盘式超细砂磨机、干法研磨机、行星搅拌机、三辊机、珠磨机、釜与罐、真空均质乳化机组、分散搅拌设备、成套生产线、灌装机
- 主营：导电银浆树脂、巴斯夫TPU、科思创TPU、石墨烯浆料、亨斯迈TPU、路博润TPU、peek薄膜、peek网布、高温尼龙、高温pc、油墨树脂、PPSU
- 主营：吸油海绵、浮油收集设备、油水分离、石墨烯粉体、石墨烯活性炭、石墨烯除甲醛、氧化石墨烯、还原氧化石墨烯、石墨烯光触媒、混凝土3D打印、建筑3D打印、3D打印房子、陶泥3D打印、建筑3D打印机器人、3D打印园林景观、桌面式3d打印机、建筑3D打印喷头、PHA降解、PHB降解、可降解包装材料、微生物降解材料、P34HB粉末、P34HB颗粒、光触媒喷雾、建筑实验室设备
- 主营：防腐漆、地坪漆、真石漆、复合石墨烯防腐浆料、氟碳漆、防锈漆、环氧漆、地面漆、绝缘涂料、氟碳面漆、环氧底漆、防火涂料、外墙涂料、防锈底漆、底漆面漆、无机涂料、防腐涂料、玻璃烤漆、氟碳涂料、聚脲涂料、环氧自流平、聚氨酯面漆、沥青改色漆、高性能涂料、聚氨酯清漆、外墙仿石漆
- 主营：润滑型石墨烯浆料、全氟三丁胺、木质素、吉氏色素
- 主营：氟碳漆、环氧地坪漆、无机涂料、复合石墨烯防腐浆料、防腐防锈漆、户外地坪漆、环氧富锌底漆、聚硅氧烷漆、船舶防腐漆、多彩漆、环氧防腐漆、无溶剂漆、海虹老人漆、耐高温漆、特种漆、耐化学品漆、防污漆