Overview
Granular fireproof thermal insulation coating is a specialized passive fire protection material composed of heat-resistant particles suspended in a binder matrix. Developed for industrial and construction applications, it forms an insulating char layer when exposed to fire, significantly delaying heat transfer to protected substrates. The granular formulation allows for thicker application compared to liquid coatings, providing enhanced thermal protection. These coatings are particularly valued in petrochemical plants, power stations, and commercial buildings where structural integrity must be maintained during fire incidents. Modern formulations often incorporate ceramic microspheres, vermiculite, or other inorganic compounds to achieve Class A fire ratings while remaining relatively lightweight compared to traditional cementitious fireproofing.
Physical and Chemical Properties
The coating's granular structure provides unique physical characteristics, including improved impact resistance and reduced cracking compared to smooth film-forming coatings. Typical thermal conductivity ranges from 0.1-0.3 W/(m·K) at ambient temperatures, increasing its effectiveness as a thermal barrier. The composite material is chemically stable under normal conditions, with pH values generally neutral to slightly alkaline. Key performance metrics include intumescent behavior (3-10x expansion under heat) and endurance at temperatures exceeding 1000°C for specified durations. The particulate nature allows controlled porosity in the cured matrix, facilitating vapor transmission while resisting direct flame penetration. Most commercial products maintain their protective qualities for decades when properly applied and undisturbed.
Main Applications
Primary use cases include structural steel fireproofing in commercial buildings, where the coating helps meet fire resistance duration requirements (typically 30-120 minutes). In industrial settings, it protects process piping, storage tanks, and offshore platforms from hydrocarbon fires. The material's vibration resistance makes it suitable for earthquake-prone regions where traditional fireproofing might crack. Specialty applications include tunnel linings, ship bulkheads, and historical building preservation. Some formulations are engineered for specific substrates like concrete or wood, with adhesion strengths exceeding 1 MPa. The coating can be spray-applied or troweled, with dry film thicknesses ranging from 5-50mm depending on the required fire rating and thermal performance specifications.
Safety and Storage
While cured coatings are inert, uncured materials may contain solvents or alkaline components requiring PPE during application—nitrile gloves and safety glasses are typically minimum requirements. Storage life in unopened containers is usually 12-24 months at temperatures between 5-30°C. Moisture-sensitive formulations require desiccant packs or humidity-controlled environments. Fire testing certifications (UL, BS, or EN standards) should be verified for compliance with local building codes. Disposal considerations include potential classification as non-hazardous waste once fully cured, though regional regulations vary. Some manufacturers offer low-VOC or water-based variants for environmentally sensitive projects.
B2B Procurement Guide
Industrial buyers should specify required fire ratings (ASTM/UL/EN standards), substrate type, and environmental exposure conditions. Bulk purchases (500kg+) often qualify for 10-20% discounts, though minimum order quantities may apply. Technical datasheets should detail dry film thickness requirements per hour of fire resistance. Leading manufacturers include specialized fire protection companies and construction chemical suppliers. Sample testing is recommended to verify application characteristics and final appearance. Consider total system costs including surface preparation, application labor, and any required topcoats. Some suppliers offer on-site technical support for large projects or custom formulations for unique requirements.
Related Manufacturers
- 主营：水晶盐、草坪沙、氛围灯、杨木粉、摩擦片、炭黑粉、金刚砂、乳胶漆、玻璃砂、发光石、白砂子、贝壳沙、网红沙、小石子、灰钙粉、蛭石粉、石棉绒、核桃壳、透明粉、夜光石、金刚沙、喷砂机、硅微粉、火山石、云母粉
- 主营：电缆料原料、聚录乙烯塑料、硬质软质注塑料、着色母粒、塑料颗粒、聚氯乙烯颗粒、聚氯乙烯粒子、聚氯乙烯粒料、工业塑料粒子、电力电缆外被料
- 主营：贝壳粉、硅灰、重钙、轻钙、碳酸钙粉、膨润土、煤矸石粉、硅酸铝粉、硅酸铝纤维、滑石粉、珍珠岩粉、蛭石粉、方解石粉、硅藻土、玻璃粉、氧化镁粉、白云石粉、火山石粉、铝矾土、全加密硅灰、半加密硅灰
- 主营：气凝胶粉、气凝胶粉末、亲水气凝胶粉体、气凝胶吸油颗粒、气凝胶石油吸附颗粒、纳米气凝胶吸油颗粒、石油吸附颗粒、气凝胶保温涂料、气凝胶隔热涂料、气凝胶保温粉、纳米气凝胶粉体、疏水气凝胶粉、纳米气凝胶块、气凝胶块体、气凝胶保温块、气凝胶自然块料
- 主营：防火涂料、钢结构防火涂料、隧道防火涂料、厚型防火涂料、非膨胀型钢结构防火涂、防火泥、膨胀型防火涂料、水性防火涂料、油性防火涂料、薄型防火涂料、厚型钢结构防火涂料、特种防火涂料、室内膨胀型钢结构防火、石膏基防火涂料、饰面型防火涂料、电缆防火涂料、阻火模块、阻火砖、柔性有机堵料
- 主营：录音棚、保护剂、胶沥青、隔热漆、隔热保温、防火喷涂、防水剂、固砂剂、玻璃砖、翻新漆、抗渗剂、界面剂、永凝液、固沙宝、彩钢瓦、防水胶、瓷砖胶、灰橡胶、防锈漆、水性漆、修复剂、防水材料、隔音吸音、隔音喷涂、阻燃喷涂
- 主营：硅酸盐保温膏(浆料)、保温抹面材料、耐火浇注料、稀土保温涂料、海泡石保温涂料、复合硅酸盐保温涂料、硅酸镁保温涂料、硅酸铝保温涂料、FBT稀土保温涂料、聚苯颗粒保温砂浆、微膨胀耐火可塑料、高温抹面料、耐火保温材料、GSY新型保温材料、铝镁质保温膏(体)、玻化微珠保温砂浆、憎水膨珠保温砂浆、高温粘合剂、石棉水泥、稀土抹面料、钢钎维耐磨浇注料、钢钎维耐磨可塑料、高温高强度浇注料
- 主营：阻火包、阻火模块、硅酸钙板、防火板、防火泥、电缆防火涂料、钢结构防火涂料、防火密封胶、水泥压力板
- 主营：挤塑板、岩棉板、采光瓦、保温隔热涂料、隔音涂料、防水涂料、不燃型复合聚苯保温板
- 主营：防水防腐涂料、保温涂料、道桥专用涂料、隔音涂料、屋顶防晒隔热漆
- 主营：防水防腐涂料、保温隔热涂料、隔音涂料、屋面防水涂料、室内防水涂料、陶瓷微珠保温隔热涂料、气凝胶绝热保温涂料、反辐射隔热防水涂料、污水池防腐涂料
- 主营：防火漆、防火涂料漆、钢结构防火涂料
- 主营：打渣剂、集渣剂、保温板、沸石颗粒、保温颗粒、除渣剂、洗手粉、膨润土、沸石粉、珠光砂、珍珠岩、清渣剂、厚普矿业、铸铁铸钢、饲料沸石、水泥膨胀、建筑保温、基质土营养土
- 主营：[]
- 主营：云母碎、贝壳粉、芙蓉红、防火涂料、红外线、萤石球、石英粉、火山石、电气石、莫来砂、金云母、蛭石片、鹅卵石、雪花白、石英砂、杨木粉、保温海、萤石矿、起重机、目木粉、水洗砂、重铁砂、贝壳彩片、萤石粉、硅藻土
- 主营：钢结构防火涂料、电缆防火涂料、隧道防火涂料
- 主营：橡塑板、橡塑保温板、B2级橡塑板、防火玻璃棉、厚型防火涂料、防火涂料、钢结构防火涂料、防水透气膜、透气膜、反射膜、玻璃棉、玻璃棉卷毡、玻璃棉毡、玻璃棉板、岩棉板、外墙岩棉板、岩棉保温板、玻璃丝布包裹玻璃棉板、岩棉卷毡、岩棉保温毡、防排烟岩棉板、防排烟玻璃棉板、橡塑管、橡塑保温管、B1级橡塑管