Overview
Galvanized ventilation equipment comprises ducts, fittings, and accessories fabricated from zinc-coated steel sheets, typically conforming to ASTM A653 standards. The galvanization process involves electroplating or hot-dipping steel in molten zinc, creating a protective layer that prevents rust and extends service life. Common configurations include spiral, rectangular, and oval ducts, alongside dampers, diffusers, and flanges. This equipment dominates the HVAC sector due to its cost-effectiveness and adaptability. It serves moderate-temperature applications (up to 200°F) and is unsuitable for highly corrosive or marine environments without additional coatings. Manufacturers offer custom fabrication for specialized airflow requirements in sectors like pharmaceuticals and food processing.
Structure and Working Principle
Standard galvanized ducts consist of lock-seam or welded joints, with thickness (gauge) ranging from 26 (light-duty) to 16 (heavy-duty). Spiral ducts use continuous helical seams for structural integrity, while rectangular variants employ Pittsburgh seams and TDC connectors. Internal smoothness (≤0.003 inch roughness) minimizes air resistance. The zinc coating (0.8–1.8 oz/ft²) sacrifices itself to protect underlying steel from oxidation. Airflow efficiency depends on proper sizing per ACCA Manual D calculations. Pressure classes (0.5–4 inches w.g.) dictate reinforcement needs, with stiffeners added for high-velocity systems. Access doors and inspection ports facilitate maintenance.
Key Features
Corrosion resistance is the standout attribute, with zinc providing 20–50 years of protection in dry indoor environments. The material’s non-combustibility (Class A fire rating) makes it preferable for smoke management systems. Compared to aluminum, galvanized steel offers higher tensile strength (50–80 ksi) at lower cost. Modern fabrication techniques enable precise tolerances (±1/16 inch for diameters). Antimicrobial options with silver-ion coatings are available for hospitals. The material’s recyclability aligns with LEED certification requirements. Noise levels remain below 35 dB when installed with proper acoustic insulation.
Application Areas
Over 60% of installations occur in commercial buildings—offices, malls, and schools—where cost and durability are prioritized. Industrial applications include welding exhausts (fume extraction) and paint booths, leveraging the material’s chemical resistance. Kitchen hoods use heavy-gauge (14–16) ducts to handle grease-laden air. Specialized variants serve laboratories (negative-pressure systems) and data centers (coolant distribution). Underground parking ventilation relies on galvanized ducts’ structural rigidity. Recent trends see usage in modular construction, with prefabricated duct assemblies shipped to sites for rapid installation.
Maintenance and Precautions
Routine inspections should check for white rust (zinc oxide) in humid areas, remedied with zinc-rich paints. Avoid abrasive cleaning that damages the coating. Biannual internal cleaning with rotary brushes prevents particulate buildup—critical for systems handling combustible dust. In coastal regions, specify G90 (0.9 oz/ft²) zinc coatings or add powder coatings. Never mix galvanized and copper components without dielectric insulation to prevent galvanic corrosion. For high-temperature exhausts (>200°F), consider aluminized steel instead. Always follow SMACNA duct construction standards during installation.
B2B Procurement Guide
Major manufacturers include Lindab, Imperial Metal Products, and Sheet Metal Connectors Inc. Bulk orders (500+ linear feet) typically secure 12–18% discounts. Request mill certification sheets to verify coating weight and steel grade. Lead times range from 2 weeks (standard sizes) to 6 weeks (custom designs). Key specifications to confirm: gauge (e.g., 22 for low-pressure residential), seam type (snap-lock vs. welded), and flange standards (T25 or angle flanges). For international shipments, opt for crated packaging to prevent transit damage. Consider MOQs—Asian suppliers often require 20-ton minimums for competitive pricing.
Related Manufacturers
- 主营：粮库储粮通风地上笼、保温门、保温窗、保温密闭粮库门
- 主营：通风天窗、通风气楼、采光通风天窗、厂房通风天窗、薄型通风天窗、顺坡通风天窗、屋脊通风天窗、11cj33通风天窗、05J621通风天窗、mcw4型通风天窗、tc12b通风天窗、mcw7型通风天窗、18J621通风天窗、06K105通风天窗、TC10E通风天窗、TC4通风天窗、屋顶通风器、自然通风器、开敞式通风气楼、启闭式通风气楼、消防排烟天窗、一字型排烟天窗、三角型排烟天窗
- 主营：通风气楼、通风天窗、自然通风器、敞开式通风设备、排烟天窗、采光天窗
- 主营：通风天窗、排烟天窗
- 主营：采光天窗、排烟天窗、成品气楼、通风天窗、通风气楼、天窗
- 主营：通风天窗、屋顶通风器、薄型通风器、排烟天窗
- 主营：厂房通风天窗、通风气楼、薄型通风天窗、厂房通风设备、采光排烟天窗
- 主营：消声器、不锈钢风管、静压箱、镀锌风管、排烟风机、共板风管、角铁风管、防火阀、调节阀、排烟风管、风机、风管、风机盘管、风机箱、管道风机、空气幕、风幕机
- 主营：不锈钢风管、螺旋风管、角铁法兰风管、通风管道、共板法兰风管
- 主营：风管、管道、白铁皮管道、镀锌管道、镀锌风管、通风风管、厂房通风管道、工业通风管道、螺旋管道、螺旋风管、白铁皮风管、共板法兰风管、角铁法兰风管、矩形风管、圆形风管、空调风管、车间除尘管道、排气管道、排风管道、排烟管道、消防排烟管道、中央空调风管、新风系统管道、不锈钢管道、河北白铁皮加工厂
- 主营：抗震支架、成品支架、管廊支架、光伏支架
- 主营：不锈钢烟囱、不锈钢风管、防火风管、镀锌风管、防爆风机、铝合金百叶风帽、不锈钢烟筒、双层保温烟囱、不锈钢锥形风帽、3C产品、各种风口、消声器静压箱、排烟阀
- 主营：粮库通风地笼价钱、粮库门、粮库保温门窗
- 主营：挡粮门、钢折板、保温门、通风板、通风装置、通风地笼、通风管道、通风设备、保温窗、粮库门、管道风机、地槽盖板、盖板制作、密闭门窗、穿孔钢板、粮库风机、离心风机、保温大门、平开密闭门、空气分配箱、防水密闭门、保温密闭窗、保温密闭门、冲孔筛板网、粮库推拉门
- 主营：智慧粮库、粮情分机、环流熏蒸、智能通风、虫情监测、智能控制柜
- 主营：法兰管、共板风管、空调风管、镀锌风管、通风管道、镀锌卷板、法兰通风管、热镀锌角钢、镀锌铁皮风管、通风排烟风管、角铁风管、法兰风管、排烟管道、矩形风管、机制风管、方形风管、不锈钢法兰、不锈钢共板、不锈钢风管、方形排烟管、白铁皮共板管、角铁焊接风管、排风排烟除尘、排烟除尘管道、不锈钢排烟管
- 主营：排烟风机、正压送风口、防火阀、通风管道、风机箱、排烟风管、风口、调节阀、离心风机箱、轴流风机、防爆风机、屋顶风机、离心风机、外转子风机箱、风机软连接、消声器、静压箱、边墙风机
- 主营：实验台、器皿柜、试剂柜、通风柜、药品柜、实验室装修、静音房
- 主营：铝合金、排风扇、刮粪机、镀锌板风机、通风机送风带、纵向通风风机、负压风机、牛舍风机、玻璃钢风机、温室风机定制、大棚降温水帘
- 主营：干湿料槽、饲料粮食存储塔、负压风机、通风窗、粥料器、产蛋箱、遮光罩、不锈钢料槽、湿帘
- 主营：防火风管、螺旋风管、不锈钢排烟风管、镀锌风管、焊接风管、矩形风管、厨房排烟管道、不锈钢排烟管、金属风管、不锈钢风管、镁质高晶板复合风管
- 主营：热镀锌板