AicaigouB2B Wiki

Gallium Antimonide Wafer

Updated: 2026-10-20

Overview

Gallium Antimonide (GaSb) wafers are single-crystal substrates composed of equal parts gallium and antimony. As a III-V compound semiconductor, GaSb offers unique electronic and optical properties that make it indispensable for specialized applications in optoelectronics and high-speed devices. The material's direct bandgap and high electron mobility enable efficient infrared light emission and detection. GaSb wafers are typically grown using the Czochralski or Bridgman method to achieve the required crystallographic perfection.

Physical and Chemical Properties

GaSb crystals exhibit a zinc blende structure with a lattice constant of 6.095 Å. The material shows excellent thermal conductivity (32 W/m·K) and a relatively low thermal expansion coefficient (5.9×10⁻⁶/K), making it thermally compatible with other III-V compounds. At room temperature, GaSb's electron mobility ranges from 2,000 to 4,000 cm²/V·s, significantly higher than silicon. The material is air-sensitive and forms a native oxide layer that can affect device performance if not properly managed.

Main Applications

GaSb wafers serve as the foundation for infrared optoelectronic devices operating in the 1.5-12 μm wavelength range. These include Night Vision Equipment (NVE) components, thermal imaging cameras, and infrared spectroscopy systems. In power electronics, GaSb substrates enable high-efficiency thermophotovoltaic cells that convert waste heat to electricity. The material also supports research into quantum cascade lasers and high-electron-mobility transistors (HEMTs) for millimeter-wave applications.

Safety and Storage

GaSb wafers contain antimony, which requires careful handling to avoid toxic exposure. Processing should occur in fume hoods with proper personal protective equipment (PPE), including nitrile gloves and particulate respirators. For long-term storage, wafers should be vacuum-sealed in antistatic containers with desiccant packs. Cleanroom conditions (Class 100 or better) are recommended for critical applications to prevent surface contamination.

B2B Procurement Guide

Industrial buyers should request comprehensive material certificates including XRD analysis for crystallographic orientation, Hall effect measurements for electrical properties, and etch pit density (EPD) reports for defect analysis. Lead times for custom-doped GaSb wafers typically range from 8-12 weeks. Consider ordering test samples before bulk purchases, as material quality varies significantly between suppliers. Primary production regions include the United States, Germany, and Japan.

Related Manufacturers