Overview
Full-size polyimide is an aromatic heterocyclic polymer synthesized through condensation reactions of dianhydrides and diamines. First developed by DuPont in the 1960s (branded as Kapton), it revolutionized high-temperature polymer applications. Unlike many plastics, polyimide maintains structural integrity from cryogenic temperatures up to 400°C continuously, with short-term resistance exceeding 500°C. This makes it indispensable for extreme environments where most polymers fail.
Physical and Chemical Properties
The material exhibits remarkable thermal-oxidative stability due to its fully conjugated aromatic structure. It has a glass transition temperature (Tg) typically between 360–410°C, with no true melting point as it decomposes before melting. Chemically, polyimide resists acids, hydrocarbons, and weak alkalis but may degrade in strong bases. Its dielectric constant ranges from 2.9–3.5 at 1 MHz, with volume resistivity >10¹⁶ Ω·cm. Mechanical properties include tensile strength of 100–230 MPa and elongation at break of 5–70%, depending on formulation.
Main Applications
In electronics, polyimide films serve as substrate materials for flexible printed circuits (FPCs) and coverlays due to their dimensional stability during soldering. The aerospace industry uses them for thermal blankets, wire insulation, and composite components. Industrial applications include high-temperature filtration membranes, adhesives for semiconductor packaging, and insulating components in electric vehicles. Emerging uses include foldable display substrates and 3D printing filaments for high-heat prototypes.
Safety and Storage
While polyimide itself has low toxicity, precautions are needed during processing. Cutting or laser ablation may generate respirable particles requiring ventilation. Thermal decomposition above 500°C releases hazardous fumes including hydrogen cyanide. Store rolls or sheets in original packaging at 15–30°C with <60% humidity. Avoid contact with strong alkalis or prolonged UV exposure. Shelf life typically exceeds 5 years when properly stored.
B2B Procurement Guide
Industrial buyers should specify: 1) Film thickness (commonly 7.5–125μm), 2) Thermal class (standard or high-temperature grades), 3) Surface treatment (adhesive-backed or untreated), and 4) Dielectric requirements. Leading manufacturers include DuPont (USA), UBE Industries (Japan), and Shengyi Technology (China). Minimum order quantities often apply for custom formulations. For reference, 25μm thick standard-grade films typically cost $80–$120/kg in bulk purchases.
Related Manufacturers
- 主营：LCP、PA66、PSU、聚酰亚胺、TPEE、PEEK、PA12、PBT/ASA、PPSU、PPS、PC、PC/ABS、ABS、润滑脂、PTFE、特富龙
- 主营：全氟聚醚二醇、全氟三丁胺、聚硅氮烷、特种硅油、特种硅树脂
- 主营：PVDF、PTFE、PFA、聚酰亚胺、SURLYN沙林、EVA、PA6、PA66、PC、PCTG、PEBA、ASA、PTB、PPO、LCP、PCTA、PETG、POM、EAA、特种工程塑料、热塑性弹性体、合金塑料、通用塑料
- 主营：聚醚醚酮、PEEK加工
- 主营：工程塑料、氟材料、热塑性弹性体
- 主营：水质分析仪、HACH、哈希、聚酰亚胺、中科院聚酰亚胺、在线水质、哈希代理、PH、水质检测仪、水质监测仪、电导率仪、总氯、COD、总磷总氮、溶解氧、HANNA、哈纳、实验室水质、便携式水质、哈希中国、水质仪表、溶氧、余氯、氨氮、测定仪
- 主营：叔碳酸、十八醛、溶菌酶、均苯型聚酰亚胺、海藻糖、癸二醇、氨基丙基、氢路噻嗪、邻苯二甲、乙基碳二、羟基癸酸、正十七烷、谷胱甘肽、烷二甲醇、松果体素、vc磷酸酯镁、2-甲基丁醛、朱栾倍半萜、丁烷四乙酸、表面活性剂、癸烷撑二醇、缩水甘油邻、10-羟基羊蜡酸、氢氯噻嗪杂质、盐酸邻菲罗啉、壳聚糖季铵盐
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、全氟三丁胺、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：化学品、香精香料、试剂、聚酰亚胺粉末、中间体、有机硅、橡胶树脂、催化剂、纳米材料
- 主营：导热材料、屏蔽材料、导电银浆、聚酰亚胺膜PI镀金镀银、柔性电极材料、导电银胶、金浆、导电橡胶、镀银导电布、金粉、铂电极浆料、FPC软板、镀金导电布、银钯浆料、电阻浆料、导热相变材料、柔性电极
- 主营：正牌料、高温特种塑胶、工程材料、橡胶原料、通用塑胶、PA66、POM、PFA、ETFE、PVDF、PBT、PC、ABS、PEEK、PTFE、FEP、PP、PC/ABS
- 主营：液体橡胶、塑料增韧剂、相容剂、英全SBS、溶剂型TPU、橡胶粉末、聚丁二烯橡胶RB系列、可发性聚苯乙烯EPS、改性TPU
- 主营：固体酸催化剂、重组胶原蛋白、硅油、全氟三丁胺、特种硅油、聚硅氮烷、硼酸铝晶须、碳化硅晶须、t-BAMBP萃取剂
- 主营：高温胶、铝冶金、绝缘线、磨砂全、绝缘纸、反光膜、锂电池、隔音棉、文具贴、结构胶、纤维胶、包包扣、静电膜、密封带、彩色eva、硅橡胶、屏蔽布、吹风机、固定垫、封罐胶、柔性板、封口机、绕包带、显示屏、橡胶垫
- 主营：优氯净、甘氨酸、切削液、二萘酚、桦焦油、甘露醇、水杨酸、硫酸锰、平平加、肌氨酸、磷酸氢、磷酸镁、牛磺酸、磷酸铁、铵明矾、蛋白胨、碳酸镁、磷酸铝、戊二醛、氯化锰、纤维素、黄糊精、硫化钠、硫化钡、木质素