Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

FRP Lining Paint

Updated: 2026-07-29

Overview

Fiberglass lining paint is a high-performance protective coating specifically formulated for fiberglass-reinforced plastic (FRP) surfaces. This specialized paint creates a seamless, impermeable barrier that prevents chemical corrosion and extends the service life of industrial FRP equipment. The coating typically consists of epoxy, vinyl ester, or polyurethane resin bases combined with corrosion-inhibiting pigments and additives. It's widely used in chemical processing plants, water treatment facilities, and industrial storage applications where FRP materials require additional protection against aggressive media.

Physical and Chemical Properties

上纬901 907乙烯基树脂漆 污水池防腐内衬玻璃钢 佐涂廊坊佐涂防腐设备有限公司

Fiberglass lining paints exhibit excellent resistance to acids, alkalis, and solvents, with specific formulations tailored to different chemical exposure environments. The cured film typically shows Shore D hardness of 70-85 and adhesion strength exceeding 5 MPa on properly prepared FRP surfaces. Temperature resistance varies by formulation, with standard products handling continuous exposure from -30°C to 120°C. Special high-temperature variants can withstand up to 180°C. The coatings demonstrate low permeability to water and chemicals, with typical water absorption rates below 1% after 24-hour immersion.

商家经验真实案例 · 安全可信
PVC胶堵漏:靠谱吗
本文解析PVC胶能否用于堵漏,从适用场景、局限性及正确使用方法三方面展开,帮助读者判断其是否适合自家漏水情况。

Main Applications

Primary applications include interior lining of FRP chemical storage tanks, process vessels, and scrubbers in industries handling corrosive substances like acids, alkalis, and salt solutions. The paint prevents degradation of the underlying FRP structure from chemical attack. Additional uses cover protection of FRP piping systems in chemical plants, wastewater treatment facilities, and marine environments. Some formulations are specially designed for food-grade applications in FRP containers used in beverage and food processing industries.

Safety and Storage

环氧玻璃鳞片涂料 玻璃钢防腐漆 恒昊 脱硫设备内衬防腐涂料廊坊恒昊节能科技有限公司

Uncured fiberglass lining paints contain volatile solvents and require careful handling. Always use in well-ventilated areas with appropriate respiratory protection, gloves, and eye protection. Avoid skin contact and eliminate ignition sources during application. Store containers tightly sealed in upright position between 5-30°C. Shelf life typically ranges 6-12 months from manufacture when stored properly. Do not use material that shows skinning, gelling, or phase separation. Dispose of waste according to local environmental regulations.

商家经验真实案例 · 安全可信
防水EVA材质探秘
本文深入解析防水EVA材质的特性、应用领域及使用注意事项,带您全面了解这种轻便耐用的高分子材料如何在工业与生活中发挥防水优势。

B2B Procurement Guide

When sourcing fiberglass lining paint, verify the manufacturer's technical specifications match your chemical exposure requirements. Key parameters to check include chemical resistance charts, maximum service temperature, dry film thickness recommendations, and recoat windows. For large projects, request product samples and conduct adhesion tests on your specific FRP substrate. Consider application method compatibility - some formulations are optimized for spray application while others work better with roller or brush. Bulk orders typically offer 10-20% cost savings compared to retail packaging.

Related Manufacturers