Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Foundry Grade Bauxite

Updated: 2026-08-02

Overview

Foundry-grade bauxite is a specialized form of bauxite ore processed for high-temperature applications. It undergoes calcination to increase alumina (Al2O3) content and reduce volatile components, making it ideal for refractory and metallurgical uses. Unlike metallurgical bauxite used for aluminum production, foundry-grade material prioritizes thermal stability and chemical inertness. Major producers include China, Brazil, and Guyana, with quality graded by alumina percentage (typically 80-88%) and impurity levels.

Physical and Chemical Properties

弱碱负电位球颗粒 还原镁颗粒负电位柱 饮水机水处理滤料陶瓷球灵寿县天隆矿产品加工厂

Calcined foundry-grade bauxite exhibits a crystalline structure dominated by corundum (α-Al2O3), providing exceptional hardness (Mohs 9) and heat resistance. Its typical bulk density ranges 1.6-1.8 g/cm³ after processing. Key chemical characteristics include low silica (<7%) and iron oxide (<3%) content. The material maintains structural integrity up to 1850°C, with thermal expansion coefficients of 8-9×10⁻⁶/°C (25-1000°C range). Particle size distribution is critical for casting applications, commonly supplied in 0-1mm, 1-3mm, or 3-5mm grades.

商家经验真实案例 · 安全可信
云母融化温度
本文探讨云母的融化温度及其影响因素,分析不同类型云母的耐热特性差异,并介绍高温环境下云母的结构变化与应用注意事项。

Main Applications

The primary use is in refractory products like kiln linings, ladles, and furnace bricks, where it resists slag corrosion. In foundries, it serves as molding sand additive to improve dimensional stability during metal casting. Secondary applications include abrasive blasting media and proppants for oil/gas fracking. Recent developments utilize it in advanced ceramics and high-alumina cement formulations. The automotive and aerospace industries value its consistency in precision casting systems.

Safety and Storage

精密铸造煅烧铝矾土 密度好 高铝矾土细粉骨料巩义市豫英耐火材料有限公司

Though non-toxic, bauxite dust requires NIOSH-approved respirators during handling. Facilities should implement dust control measures per OSHA 1910.1000 standards for particulates. Store in sealed containers or covered piles to prevent moisture absorption, which can reduce flowability. Bulk shipments should avoid contamination with ferrous materials. Fire risk is minimal, but thermal shock may occur if exposed to rapid temperature changes above 800°C.

商家经验真实案例 · 安全可信
熟料烧失量控制指南
本文解析熟料烧失量的合理控制范围及其影响因素,探讨烧失量异常的处理方法,帮助优化生产工艺。烧失量是衡量熟料质量的重要指标,合理控制对保证水泥性能至关重要。

B2B Procurement Guide

Procurement professionals should specify: 1) Al2O3 content (80%, 85%, or 88% grades), 2) LOI (loss on ignition, typically <0.5% for calcined), and 3) sieve analysis for particle size. Request certified mill test reports for each batch. For refractory applications, prioritize suppliers offering consistent crystalline phase composition. Consider FOB prices from major ports like Tianjin or Santos, with 20-40MT containerized loads being cost-effective for mid-volume buyers. Sample testing is recommended before large orders.

Related Manufacturers