Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

FM24C64B

Updated: 2026-07-15

Overview

The FM24C64B is a 64Kbit serial F-RAM (Ferroelectric RAM) memory chip manufactured by Cypress Semiconductor (now Infineon Technologies). It operates via the I2C interface, offering high-speed read and write cycles with non-volatile data retention. Unlike traditional EEPROM or flash memory, F-RAM provides faster write speeds, lower power consumption, and significantly higher endurance, making it suitable for applications requiring frequent data updates. This chip is widely used in embedded systems, industrial automation, automotive electronics, and IoT devices where reliable and fast non-volatile memory is essential. Its ability to retain data without power and withstand up to 10^14 read/write cycles sets it apart from conventional memory solutions.

Structure and Working Principle

原装FM24C64B-GTR 存储IC CYPRESS赛普拉斯 封装SOIC8深圳市中芯巨能电子有限公司

The FM24C64B integrates a ferroelectric capacitor array for data storage, which polarizes to represent binary states (0 or 1). This polarization remains stable without power, ensuring non-volatility. The chip communicates via a two-wire I2C bus (SCL and SDA), supporting clock frequencies up to 1MHz for fast data transfers. Internally, the memory is organized as 8,192 bytes (8K x 8), with each byte addressable through a 13-bit address space. The device includes built-in write protection features and supports partial page writes, enhancing flexibility in data management. Its low standby current (typically 10µA) makes it energy-efficient for battery-powered applications.

商家经验真实案例 · 安全可信
max7474参数解析
本文深入探讨max7474的关键参数,包括其基本性能指标、应用场景及参数选择的注意事项,帮助读者全面了解这一产品的技术特点。

Key Features

The FM24C64B stands out for its high endurance (10^14 read/write cycles), far exceeding EEPROM or flash memory. It offers near-instantaneous write operations (no write delay), enabling real-time data logging. The chip operates across a wide voltage range (2.7V to 5.5V), making it adaptable to various systems. Other notable features include a 40-year data retention period, industrial temperature range support (-40°C to +85°C), and compatibility with standard I2C protocols. Its small footprint (8-pin SOIC or DFN package) is ideal for space-constrained designs. These attributes make it a preferred choice for applications demanding reliability and performance.

Application Areas

The FM24C64B is extensively used in automotive systems for storing critical data like odometer readings and event logs. In industrial automation, it logs sensor data and machine parameters due to its high endurance and fast writes. IoT devices leverage its low power consumption for energy-efficient data storage. Other applications include medical devices (patient monitoring), smart meters (consumption records), and consumer electronics (configuration settings). Its robustness in harsh environments (e.g., temperature fluctuations) further expands its usability in aerospace and defense systems. The chip’s versatility makes it a go-to solution for non-volatile memory needs.

Maintenance and Precautions

FM24C64B-GTR 存储IC Cypress SOP封装 5V电压 湿度敏感 批次21+雅创芯城(深圳)供应链有限公司

To ensure longevity, avoid exposing the FM24C64B to voltages beyond its specified range (2.7V–5.5V). Use ESD precautions during handling to prevent electrostatic damage. Proper decoupling capacitors (0.1µF) near the power pins are recommended to stabilize supply voltage. When designing the I2C bus, adhere to pull-up resistor guidelines (typically 4.7kΩ) for reliable communication. Avoid frequent write cycles to the same memory address to distribute wear evenly. For firmware, implement error-checking mechanisms (e.g., CRC) to detect data corruption, though F-RAM is inherently more reliable than flash.

商家经验真实案例 · 安全可信
nju7311al芯片解析
本文介绍nju7311al芯片的基本信息,包括其功能特点、应用场景以及技术优势,帮助读者全面了解这款芯片的用途和性能。

B2B Procurement Guide

When sourcing the FM24C64B, verify authenticity by purchasing from authorized distributors like Digi-Key or Mouser to avoid counterfeit parts. Bulk orders (1,000+ units) commonly reduce costs by 20–30%. Check for RoHS compliance if environmental regulations apply. Evaluate alternative F-RAM chips (e.g., Fujitsu MB85RC64) for cost or performance comparisons. Lead times vary; stock availability is typically better for SOIC packages than DFN. For prototyping, sample kits from manufacturers can be requested. Always review datasheet revisions to ensure compatibility with your design.

Related Manufacturers