Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Fluoroethane Cleaning Agent

Updated: 2026-07-15

Overview

Fluoroethane cleaning agent is a fluorinated hydrocarbon solvent prized for its rapid evaporation and minimal residue. Developed as an alternative to ozone-depleting chlorofluorocarbons (CFCs), it meets modern environmental regulations while delivering superior cleaning performance. Its low surface tension allows it to penetrate intricate parts, making it ideal for critical applications like circuit board assembly and surgical instrument sterilization. Industries favor fluoroethane for its compatibility with plastics, elastomers, and metals. Unlike traditional solvents, it leaves no oily film, ensuring components are immediately ready for further processing or packaging. Its non-flammable nature also reduces workplace risks compared to hydrocarbon-based cleaners.

Physical and Chemical Properties

稳定性好 节约资源 141B清洗剂―氟二氯乙烷回收机 净得宝出品深圳市净得宝环保设备有限公司

Fluoroethane (C2H5F) is a colorless gas under standard conditions but is stored as a pressurized liquid. With a boiling point of -37°C, it evaporates almost instantly at room temperature, eliminating the need for drying steps. Its density of 0.82 g/cm³ makes it lighter than water, while its low viscosity ensures thorough contamination removal. Chemically, fluoroethane is inert toward most materials, including sensitive substrates like polycarbonate and copper. It exhibits negligible reactivity with acids, bases, or oxidizing agents, ensuring stable performance. However, prolonged exposure to high temperatures (>200°C) may cause decomposition into hydrogen fluoride, requiring controlled usage environments.

商家经验真实案例 · 安全可信
铝合金镀镍活化剂配方大揭秘
本文揭秘铝合金化学镀镍中常用的活化剂配方,包括酸洗、碱洗及复合活化方案,并分享配方优化技巧,助你轻松掌握镀镍前处理关键。

Main Applications

In electronics manufacturing, fluoroethane removes flux residues and particulate matter from PCBs without damaging microcomponents. Aerospace engineers use it to degrease turbine blades and avionics, leveraging its non-corrosive properties. Medical device manufacturers rely on its sterilizing efficacy for endoscopes and implants. The automotive sector applies fluoroethane for fuel injector cleaning and sensor maintenance. Its compatibility with ABS and silicone seals prevents swelling or cracking. Optical industries utilize it for lens and mirror cleaning, where streak-free results are critical. Emerging applications include 3D-printed part post-processing and semiconductor wafer cleaning.

Safety and Storage

环化工优质清洗剂 优良品质 多行业适用 使用安全深圳市合明科技有限公司

While fluoroethane has low acute toxicity, workplace exposure limits (typically 1,000 ppm) should be monitored. Use local exhaust ventilation in confined spaces, and avoid direct skin contact to prevent frostbite from rapid evaporation. Personal protective equipment (PPE) like nitrile gloves and safety goggles is recommended. Store containers upright in cool, dry areas away from sunlight. Bulk storage requires pressure-rated tanks with pressure relief valves. Never mix with incompatible substances like alkaline metals or strong oxidizers. Spills should be contained with absorbent materials and allowed to evaporate in well-ventilated zones.

商家经验真实案例 · 安全可信
防水剂C6成分解析
本文深入解读防水剂C6的主要化学成分构成,解析其防水机理及适用场景,帮助读者科学认识这类含氟化合物的特性与工业应用价值。

B2B Procurement Guide

When sourcing fluoroethane cleaning agents, prioritize suppliers with ISO 9001 certification and batch-specific analysis certificates. Key specifications include moisture content (<50 ppm) and non-volatile residue (<10 ppm). For medical or aerospace use, request FDA 21 CFR or AS9100 compliance documentation. Bulk purchases (200+ kg) often reduce costs by 15–30%. Consider solvent recovery systems to minimize waste. Evaluate packaging options: pressurized cylinders suit small-scale users, while ISO tank containers optimize logistics for large volumes. Lead times vary from 2–6 weeks depending on customization and regulatory approvals.

Related Manufacturers