Overview
Flange anti-slip screws are engineered fasteners that combine a flanged head with specialized thread patterns to resist vibration-induced loosening. Unlike standard screws, their serrated flange bites into the mating surface, creating additional friction. Developed for industries where reliability is critical, these screws are now standard in automotive assemblies, industrial equipment, and structural applications. Their design often incorporates a nylon patch or distorted threads to enhance locking performance. The flange distributes clamping force evenly, reducing surface pressure and minimizing damage to soft materials. These screws are typically available in metric and imperial sizes, with coatings like zinc plating or Dacromet for corrosion protection.
Structure and Working Principle
The screw’s anti-slip capability stems from three components: the serrated flange, modified thread geometry, and sometimes a nylon insert. The flange’s teeth deform slightly when tightened, creating a ratchet-like effect against the workpiece. Threads may feature a tapered design or intermittent locking zones that increase resistance to rotational forces. In dynamic testing, flange anti-slip screws outperform standard fasteners by maintaining 85-95% of initial preload after prolonged vibration exposure. The working principle relies on elastic deformation – the flange and threads store energy when tightened, which counteracts loosening forces. Some variants use a dual-angle thread profile that creates opposing friction vectors.
Key Features
1. Vibration resistance: Can withstand frequencies up to 200Hz without backing off, making them ideal for engine components and rotating machinery. 2. Material versatility: Available in grade 5, 8, or 304/316 stainless steel to match strength and corrosion requirements. 3. Reusability: Unlike chemical thread lockers, most flange screws maintain effectiveness through 5-8 disassembly cycles. Additional features include self-aligning flanges for angled surfaces and colored identification markings for quality control. High-performance models incorporate micro-encapsulated adhesives that activate during installation. The screws meet industry standards like DIN 6923 and ISO 7380, ensuring compatibility with existing designs.
Application Areas
Primary applications include automotive subframes, where they secure suspension components subject to road vibrations. Aerospace manufacturers use titanium versions for aircraft interior panels, while the energy sector employs them in wind turbine gearboxes. Their electrical grounding capability makes them popular in electrical enclosures. In consumer products, flange anti-slip screws appear in washing machine drums and exercise equipment. The food processing industry prefers stainless steel variants for conveyor systems. Recent innovations include high-temperature variants for exhaust systems and miniaturized versions for electronics assembly.
Maintenance and Precautions
Regular inspection should check for flange tooth wear or thread deformation – replacement is recommended if over 30% of serrations are flattened. Use a torque wrench during installation to avoid under/over-tightening; typical values range from 5-50 Nm depending on size. For stainless steel versions, apply molybdenum disulfide paste to prevent galling. Avoid using impact tools unless specified by the manufacturer, as these may damage the locking features. When removing stuck screws, heat application should not exceed 150°C to preserve tempering. Store screws in dry conditions to prevent hydrogen embrittlement in high-strength variants.
B2B Procurement Guide
Bulk purchases (1,000+ units) typically offer 15-30% cost savings, with MOQs starting at 500 pieces for custom orders. Key specifications to confirm include thread pitch conformity (e.g., UNF vs. metric), flange diameter tolerance (±0.1mm standard), and salt spray test hours (e.g., 500h for automotive grade). Leading manufacturers include Bossard, Würth, and ITW Shakeproof. For critical applications, request certified material test reports (MTRs) and vibration test data. Just-in-time delivery options are available from distributors with regional warehouses. Sample testing under actual operating conditions is strongly recommended before large-scale adoption.
Related Manufacturers
- 主营：门轴、车修膨胀螺栓、活节螺栓、法兰螺栓、不锈钢地脚螺栓、钢结构螺栓、高强度螺栓、卡缆螺栓、U型螺栓、开槽圆螺母、油堵螺栓、钢筋套筒、合页、垫圈、铆钉、销轴、内六角扳手、预埋板、焊钉、开口销、套管、方斜垫、双头螺栓、圆柱销、不锈钢螺栓
- 主营：合页、门轴、高强度螺栓、法兰螺栓、钢结构螺栓、内六角扳手、圆螺母、光伏螺栓、铆钉、销轴、螺母、不锈钢螺栓、不锈钢螺母、活节螺栓、预埋板、光伏配件、垫圈、不锈钢内六角螺栓、膨胀螺栓、煤矿螺母、地脚螺栓
- 主营：304不锈钢螺栓、2205不锈钢螺栓、310S不锈钢螺栓、304不锈钢螺丝、2205不锈钢螺丝、310S不锈钢螺丝、316不锈钢螺丝、热镀锌螺丝、达克罗螺丝、316不锈钢螺栓、304不锈钢螺母、热镀锌螺栓
- 主营：不锈钢螺栓、不锈钢索具、不锈钢螺母、合螺丝、螺丝帽、不锈钢钻尾钉、不锈钢膨胀螺栓、平键销、轴销钉、收紧器、骑马卡、接地线、避雷针、支撑架、固定销、护栏母、斜拉杆、套筒母、预埋件、圆螺母、扁螺母、靠背销、山形卡、定位销、球面垫
- 主营：平垫圈、不锈钢垫片、不锈钢垫圈、紧固密封螺丝、耐磨不锈钢钉、一字沉头螺钉
- 主营：8.8级高强度外六角、10.9S钢结构螺栓、Q235B地脚螺栓、Q355B预埋锚栓、3米镀锌丝杆
- 主营：建筑螺栓、地脚螺栓、不锈钢螺栓、法兰螺栓、建筑配件
- 主营：预埋件、厂房电力铁塔、地脚螺栓、焊接螺丝、外六角钻尾螺丝、T型螺丝、法兰带垫螺母、马车螺丝、外六角内膨胀螺丝、不锈钢薄螺母、镀铜焊接螺母、防松螺母、高强度螺母、家具锥形螺母、卡式螺母、盲孔压铆螺母螺柱、内外牙螺母、热镀锌螺母、台阶螺母、四爪螺母、304不锈钢喉箍、羊眼螺栓、不锈钢方形卡箍、T型螺母、不锈钢弹垫垫圈
- 主营：化学螺栓、预埋螺栓、钢结构螺栓
- 主营：带齿防滑锁紧法兰螺丝、六角螺栓、螺母、紧固件
- 主营：钻尾丝、预埋板、预埋件、自攻螺丝、法兰螺母、六角螺丝、自攻丝、连接件、扣丝杠、扣丝杆、镀锌丝杆、防水支架、镀锌牙条、镀锌丝杠、六角螺栓、化学锚栓、自攻螺钉、钢筋套筒、螺栓定制、弹簧垫片、穿墙丝杠、一体盖母、穿墙螺杆、光伏配件、膨胀螺栓
- 主营：高强度螺栓、预埋件、地脚螺栓、异形件
- 主营：不锈钢螺栓、热镀锌螺栓、光伏配件、法兰面螺栓、高强度螺栓
- 主营：不锈钢螺栓、不锈钢螺母、膨胀螺栓、法兰螺栓、光伏支架、钻尾丝、高强度螺栓、热镀锌螺栓、全螺纹丝杆
- 主营：铝合金铆钉、六角螺栓、六角螺母、圆柱头螺丝、内六角螺丝、沉头螺丝、非标螺丝、自攻螺丝、T型螺丝、钻尾螺丝、四方螺栓、方螺母、十字自攻、圆头螺钉、平垫、弹垫、梅花螺钉、紧定、活节螺栓、圆柱销、铆螺母、挡圈、牙条、牙棒