Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Fiberglass Textile

Updated: 2026-08-02

Overview

Fiberglass textiles are engineered fabrics composed of continuous glass filaments woven into various patterns or bonded as non-woven mats. Developed in the 1930s, these textiles leverage the inherent properties of silica-based glass—including dimensional stability and non-combustibility—while providing the flexibility of fabric. Modern production involves melting silica sand with additives (e.g., alumina, calcium oxide) at 1,400°C, then extruding the molten glass through bushings to form microfibers. The global market for fiberglass textiles exceeds $8 billion annually, driven by demand from the construction sector (30%), industrial insulation (25%), and transportation (20%). Recent advancements include ultra-thin textiles (<0.1mm) for electronics and alkali-resistant formulations for concrete reinforcement.

Physical and Chemical Properties

熔融硅微粉高温性能稳用于高温内衬冶金熔剂提升窑炉耐火度河北文盛新材料科技有限公司

Fiberglass textiles exhibit exceptional mechanical properties, with tensile strength ranging from 1,000–3,000 MPa depending on the fiber diameter (typically 5–24 microns). Their thermal conductivity measures 0.03–0.05 W/m·K, making them superior to most organic insulating materials. The fabrics retain 90% of their strength at 200°C and can withstand short-term exposure up to 550°C. Chemically, they resist most acids except hydrofluoric and hot phosphoric acid. Alkali resistance varies by composition—standard E-glass loses 50% strength after 28 days in pH 13 solutions, while AR-glass (alkali-resistant) formulations maintain integrity. Electrical resistivity exceeds 10^15 Ω·cm, with dielectric strength of 20–25 kV/mm.

商家经验真实案例 · 安全可信
XPE保温材料的妙用
本文介绍了XPE保温材料的特点、应用场景以及选择时的注意事项,帮助读者全面了解这种高效保温材料。

Main Applications

In construction, fiberglass textiles serve as reinforcing scrims in exterior insulation systems (ETICS) and waterproofing membranes, where their dimensional stability prevents cracking. Aerospace applications utilize lightweight satin weaves (160–200 g/m²) as prepreg reinforcements for composite panels, reducing aircraft weight by 20–30% versus aluminum. Industrial uses include high-temperature filtration bags for power plants (withstanding 260°C flue gases) and conveyor belts for glass manufacturing. Emerging applications include printed circuit board substrates (FR-4 grade) and radome covers for radar systems, leveraging the material's RF transparency.

Safety and Storage

科品 186-1012240机油滤芯  推土机 省维修费 工厂订制固安县科品滤芯厂(个体工商户)

Handling requires NIOSH-approved N95 respirators to prevent inhalation of airborne fibers, which may cause temporary respiratory irritation. Direct skin contact should be avoided using gloves and long sleeves, as broken fibers can embed in skin. Facilities must comply with OSHA's permissible exposure limit of 1 fiber/cm³ over an 8-hour workday. Storage recommendations include palletized rolls wrapped in UV-resistant polyethylene, kept at <70% relative humidity. Untreated fabrics degrade under prolonged UV exposure—outdoor storage should not exceed 6 months. Chemical incompatibilities include strong acids (except nitric) and concentrated alkalis, which attack the silica network.

商家经验真实案例 · 安全可信
电池组正负极,谁更易“受伤
本文探讨电池组供电时正负极哪边电池更易损坏,分析电流路径、电池特性及使用环境对电池寿命的影响,提供延长电池寿命的实用建议。

B2B Procurement Guide

Industrial buyers should specify: 1. Weave type: Plain (balanced strength), twill (drapeability), or leno (stability for coatings) 2. Weight: 100–600 g/m² (lighter for composites, heavier for insulation) 3. Treatments: Silane coupling agents improve resin adhesion in composites; PTFE coatings enhance release properties Leading manufacturers include Owens Corning (US), Saint-Gobain (France), and Jushi Group (China). MOQs typically start at 1,000m for standard grades, with lead times of 2–4 weeks. Custom widths (up to 3.2m) incur 15–20% premium pricing. Third-party certifications to verify include ISO 9001, ASTM D579/D579M for woven fabrics, and EN 13501-1 fire ratings.

Related Manufacturers