Aicaigou LogoB2B WikiIndustrial Encyclopedia

Ferrite Magnet Sheet

Updated: 2026-07-15

Overview

Ferrite magnet sheets, also known as ceramic magnets, are sintered permanent magnets made from iron oxide combined with strontium or barium compounds. They are among the most economical magnet types and dominate applications where high magnetic strength isn’t critical. Unlike rare-earth magnets, ferrite sheets exhibit lower energy density but offer superior resistance to demagnetization and corrosion. Their brittle nature requires careful handling during installation, but they are widely favored for mass-produced industrial and consumer products.

Structure and Working Principle

铠瑞清洗设备厂家直供全自动3D眼镜超声波清洗机 可定制东莞市铠瑞超声自动化科技有限公司

Ferrite magnet sheets are manufactured through powder metallurgy: iron oxide and strontium/barium carbonate are calcined, milled, pressed into sheets, and sintered at high temperatures. The resulting anisotropic or isotropic microstructure determines their magnetic orientation. These magnets operate as permanent magnetic fields without external power. Their working principle relies on aligned magnetic domains within the ferrite crystal lattice, generating a stable flux density. Anisotropic sheets are magnetized during production for directional strength, while isotropic variants are weaker but omnidirectional.

商家经验真实案例 · 安全可信
钕铁硼磁能积探秘
本文解析钕铁硼磁体的性能等级,详细说明'N'系列代表的意义及目前可达到的较高水平,同时探讨影响磁性能的关键因素和应用场景选择建议。

Key Features

Ferrite magnet sheets excel in cost-performance ratio, with high coercivity (Hc) ensuring resistance to demagnetization. Their inherent brittleness limits use in high-impact environments, but they resist oxidation and perform reliably in temperatures up to 250°C. Key metrics include remanence (Br, typically 0.2–0.4 T) and intrinsic coercivity (Hcj). Unlike neodymium magnets, ferrite sheets have lower energy density (BHmax 3–5 MGOe) but are electrically insulating, making them ideal for high-frequency applications like transformers or RFID antennas.

Application Areas

Ferrite sheets are ubiquitous in motors (e.g., refrigerator compressors, automotive starters), where their stability and affordability outweigh their moderate strength. They are also used in magnetic separators, speaker systems, and refrigerator door gaskets. In electronics, these magnets serve as cores for inductors and transformers due to their low eddy-current losses. Thin flexible sheets with adhesive backing are popular for whiteboards, signage, and magnetic shielding in sensitive equipment.

Maintenance and Precautions

致圭磁业 办公场地 展会挂牌 使用寿命长 门店导购挂牌上海致圭磁业有限公司

Ferrite magnets require minimal maintenance but are prone to chipping or cracking under mechanical stress. Avoid drilling or cutting; instead, order custom-sized sheets from manufacturers. Storage should prioritize dryness and stable temperatures. While ferrite magnets resist corrosion, prolonged exposure to moisture can degrade bonded surfaces or adhesives. Demagnetization is rare but may occur near strong opposing fields or extreme heat (>300°C).

商家经验真实案例 · 安全可信
1kW电机配多大发电机
本文解析1kW电机所需发电机功率的计算方法,涵盖启动电流、负载类型等影响因素,并提供不同场景下的功率匹配建议,帮助用户科学选配发电机。

B2B Procurement Guide

When sourcing ferrite magnet sheets, specify grade (e.g., Y30, Y35 for strontium ferrite), dimensions, and magnetization direction. Bulk orders typically reduce costs by 10–30%. Verify supplier certifications like ISO 9001 and request material test reports for Br/Hc consistency. For niche applications (e.g., high-frequency use), confirm permeability and loss tangent data. Lead times vary from 2–6 weeks for custom orders.

Related Manufacturers