Aicaigou LogoB2B Wiki

Fence Panel[2]

Updated: 2026-09-11

Overview

Wire mesh panels consist of uniformly spaced metal wires welded or woven into grids. They are fundamental in construction, agriculture, and industrial settings due to their balance of strength and permeability. Standardized production allows for precise aperture sizes (typically 5–100mm) and wire diameters (0.5–6mm). Common manufacturing methods include spot welding for rigid panels and interlocking weaving for flexible variants. Materials are selected based on application needs—stainless steel for corrosive environments, galvanized steel for outdoor durability, and aluminum for lightweight requirements.

Structure and Working Principle

The panel's performance depends on its geometric configuration. Square or rectangular weaves distribute loads evenly, while diagonal patterns enhance rigidity. Welded meshes have fixed joints that prevent unraveling under stress, making them ideal for concrete reinforcement. Mesh strength follows Hooke's Law (F=kx), where the spring constant (k) is determined by wire thickness and spacing. Open-area ratios (30–70%) affect airflow and visibility—critical for architectural facades or machine guards. Bending tolerance varies by material; stainless steel can endure repeated flexing without fatigue.

Key Features

Corrosion resistance is achieved through hot-dip galvanizing (zinc coating ≥80g/m²) or powder coating. Electro-polished stainless steel panels (AISI 304/316) resist saltwater and chemicals. Load-bearing capacity ranges from 200N/m² (light partitions) to 20kN/m² (industrial flooring). Fire ratings meet ASTM E119 standards when used with fireproof membranes. Some panels feature anti-climb designs with small apertures (<50mm) and outward-angled tops for security applications.

Application Areas

Construction: Reinforcing shotcrete in tunneling (ASTM A185), crack prevention in slabs. Perimeter fences use 2.5mm wire with 50x50mm apertures and 2.4m height for intruder deterrence. Industrial: Machine guarding (OSHA 1910.212 compliance), bulk material sorting screens (ISO 3310-1 test sieves). Food processing plants specify 316L stainless steel with electropolished surfaces for hygiene. Agriculture: Animal enclosures (galvanized after welding), trellising for crops. Decorative panels with powder-coated colors enhance architectural facades and interior design.

Maintenance and Precautions

Inspect welded joints biannually for cracks in high-vibration environments. Salt spray exposure requires annual cleaning with pH-neutral solutions to prevent galvanic corrosion. Bent panels should be cold-worked (not heated) to maintain metallurgical properties. Storage should avoid stacking over 1.5m height to prevent deformation. Cutting requires abrasive discs or hydraulic shears—never oxyacetylene torches, which compromise coatings. Edge protection with PVC trim prevents injury during installation.

B2B Procurement Guide

Bulk orders (≥500m²) typically receive 8–15% discounts. MOQs vary: 100m² for custom designs vs. 10m² for stock patterns. Lead times range from 3 days (standard panels) to 4 weeks (special alloys). Quality checks should verify wire tensile strength (≥500MPa for structural use) and coating thickness (micrometer testing). Certifications to request: CE marking for EU, GB/T 33281-2016 for China, and Mill Test Reports for material traceability. Container loading efficiency improves with palletized rolls (max. 2.3m width).

Related Manufacturers