Overview
Extraction cleaning agents are chemical formulations designed to remove oils, greases, and contaminants from industrial surfaces. They are widely used in sectors requiring precision cleaning, such as aerospace, automotive, and electronics manufacturing. These agents work by dissolving or emulsifying contaminants, enabling easy rinsing or evaporation. Modern formulations prioritize environmental and worker safety, with many brands offering biodegradable or low-VOC alternatives. Their efficacy depends on factors like concentration, temperature, and application method, making them versatile for both manual and automated cleaning systems.
Physical and Chemical Properties
Extraction cleaners typically exhibit low viscosity and high solvency power for non-polar substances like oils. Their pH ranges from neutral to mildly alkaline to prevent material corrosion. Advanced variants may include surfactants to enhance water rinsability. Thermal stability varies by formulation, with some designed for high-temperature vapor degreasing. Flash points are a critical safety parameter, especially for solvents like hydrocarbons or modified alcohols. Density and volatility are tailored to balance cleaning speed and residue control.
Main Applications
In metalworking, these agents remove machining coolants and forging lubricants. Electronics manufacturers use them for flux removal and PCB cleaning. Automotive applications include engine part degreasing and pre-paint surface preparation. Specialized formulations address niche needs, such as oxygen-system cleaning in aerospace or medical device sterilization. Ultrasonic cleaning systems often incorporate these agents to boost cavitation effects for particulate removal.
Safety and Storage
Store in approved containers away from ignition sources. Ensure adequate ventilation during use to prevent vapor accumulation. Spill kits should be accessible due to slip hazards and environmental risks. Material compatibility testing is recommended for plastics or elastomers. Disposal must comply with local regulations, especially for halogenated solvents. SDS documentation provides specific first-aid measures for skin/eye contact or ingestion.
B2B Procurement Guide
Evaluate suppliers based on technical support, customization options, and regulatory compliance documentation. Bulk purchases (200+ liters) typically reduce costs by 15–30%. Consider closed-loop systems to minimize waste. Key procurement metrics include cleaning efficiency (measured by particulate counts), drying time, and residue levels. Request samples for pilot testing with actual production materials. Long-term contracts with quality clauses help maintain consistency.
Related Manufacturers
- 主营：乐泰清洗剂、螺纹锁固
- 主营：食用酒精、甲醇、无水乙醇、溶剂油、异丙醇、食用乙醇、乙醇、二价酸酯、二丙酮醇、醋酸正丙酯、异丙醇IPA、醋酸仲丁酯、无水乙醇高纯度、95%乙醇、三甲苯、丙二醇甲醚、环已烷、环已酮、混丁醇、丙三醇、轻质白油、工业乙醇、磺酸、二乙二醇丁醚DB、正己烷、正丁醇
- 主营：表面活性剂、污水处理药剂、各类无机盐
- 主营：苯酚、磷酸、甲酸、优质溶剂、正丁醇、三乙醇胺、顺酐、苯酐
- 主营：酒石酸钾钠、单硬脂酸甘油酯
- 主营：正丙醇、乙二醇、冰醋酸、丁酮涂料稀释剂、清洗剂、溶剂油、正丁醇、异丙醇、甲醇、醋酸丁酯、醋酸乙酯、环己酮、丙二醇、正庚烷、苄胺、二氧六环、二甲基亚砜、二氯甲烷、无水乙醇、二乙二醇、二氯乙烷、丁酯、正丙酯、二丙酮醇DAA、二甲苯
- 主营：油漆涂料清洗剂、乙二醇、油墨涂料、甲基吡咯烷酮
- 主营：磺化煤油、丙二醇、对甲苯磺酰氯、120号溶剂油、150号溶剂油、200号溶剂油、D40溶剂油、D60溶剂油、D80溶剂油、D130溶剂油、260号溶剂油、溶剂油、莫卡、聚乙二醇、正十四烷、异构十二烷、甲基叔丁基醚、铝粉膏、二甲硫基甲苯二胺、二乙基甲苯二胺、石蜡、白油、乙二醇丁醚、硫酸铜、氯化镍
- 主营：异丙醇、二甲苯、二氯甲烷、无水乙醇、碳酸二甲酯
- 主营：氢氧化钾、过硫酸铵、过硫酸钠、大苏打、草酸、氨基磺酸、顺酐、冰醋酸、乙醇、甘油、甲酸乙酯、BB酸
- 主营：清洗剂
- 主营：水玻璃、乙醇、液碱、麦芽糊精、工业盐、甲醇、次氯酸钠、磷酸氢钙、亚硝酸钠、二甲苯、乙二醇乙醚醋酸酯、片碱、小苏打、环己酮、氟硅酸钠、氨水、异丙醇、二氯甲烷、草酸、纯碱、葡萄糖、氯化钙、聚合硫酸铁、硼砂
- 主营：苯磺酸、苯酚磺酸、环烷酸铈、抗氧剂BHT、N235 萃取剂、C272萃取剂、均苯四甲酸二酐、对苯乙烯磺酸钠、氟化铝、椰油酰胺丙基甜菜碱、甘油三苯甲酸酯
- 主营：异丙醇、苯甲醇、二丁酯、溶剂油、酸酯dbe、二甲苯、醋酸乙酯、醋酸丁酯、二辛酯、醋酸甲酯、醋酸正丙酯、醋酸仲丁酯、纯苯、三甲苯、四甲苯、正丁醇、甲醇、乙醇、乙二醇、碳酸二甲酯、三乙醇胺、磷酸、三氯乙烯
- 主营：清洗剂、溶剂、水处理
- 主营：航空煤油、三氯乙烯、四氢呋喃、溶剂油、乙腈、异丙醇、无水乙醇、磷酸、85%甲酸、氢氧化钠、环己酮、二甲基乙酰胺、二甲基甲酰胺、苯乙烯、环氧氯丙烷、二氯甲烷、二甲苯、丙烯酸甲酯、14丁二醇、正丁醇、三乙胺、正己烷、甲醇、冰醋酸、戊二醛