Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Explosion-proof Double Drum Hoist

Updated: 2026-08-04

Overview

The explosion-proof double-drum hoist is engineered for high-risk environments where conventional lifting equipment could ignite flammable substances. Its dual-drum design allows simultaneous handling of multiple loads or counterbalancing, improving efficiency and safety. Commonly integrated with anti-explosion motors and enclosed gear systems, it prevents sparks and overheating. These hoists are classified by lifting capacity (typically 1–20 tons) and lifting height (up to 500 meters). They are essential in industries like underground mining, petrochemical processing, and grain storage facilities, where combustible dust or gases necessitate specialized equipment.

Structure and Working Principle

盛达 双滚筒1.2米绞 车 盘型闸绞车 矿用防爆提升机鹤壁市盛达矿山设备有限公司

The hoist consists of two parallel drums wound with steel wire ropes, driven by an explosion-proof motor via a reduction gearbox. A fail-safe braking system engages automatically during power loss or overload. The drums rotate synchronously to lift/lower loads while maintaining tension balance. Key components include flameproof electrical enclosures, temperature sensors, and corrosion-resistant coatings. The motor and control panel are housed in sealed compartments to isolate potential ignition sources. Advanced models feature frequency converters for smooth acceleration and IoT-enabled load monitoring.

商家经验真实案例 · 安全可信
hz-6a抓岩机重量解析
本文详细解答hz-6a抓岩机的重量参数,分析其结构设计与重量分布特点,并探讨重量对实际作业的影响,为设备选型提供参考。

Key Features

1. **Dual-Drum Design**: Enables tandem lifting or independent operation, reducing sway and improving stability. 2. **Explosion-Proof Certification**: Complies with ATEX Directive 2014/34/EU and IECEx standards for Zone 1/21 hazardous areas. 3. **Safety Mechanisms**: Includes emergency stop buttons, overspeed detectors, and real-time load monitoring. Additional features may include remote control operation, anti-corrosion treatment for humid environments, and modular construction for easy maintenance. The hoist’s rigid welded frame ensures durability under heavy cyclic loading.

Application Areas

Primary applications include coal mines (for transporting personnel and equipment), oil refineries (pipeline installation), and chemical plants (reactor maintenance). They are also deployed in pharmaceutical production (handling flammable solvents) and wastewater treatment facilities (methane-rich environments). In offshore platforms, these hoists assist in drilling rig operations where explosive gases like hydrogen sulfide may be present. Customized variants with stainless-steel construction serve marine and saltwater-exposed locations.

Maintenance and Precautions

二手矿井提升机 2.5米提升绞车 双刹型滚筒 有防爆型鹤壁市山城区永鑫矿山机电经营部

Monthly inspections should cover wire rope wear, brake pad thickness, and electrical insulation resistance. Lubricate gearboxes with high-temperature grease and check motor ventilation ducts for blockages. Critical precautions: Never bypass safety interlocks, and always de-energize the hoist before repairs. Use only original spare parts to maintain explosion-proof integrity. Training for operators should emphasize load limits and emergency procedures in gas-leak scenarios.

商家经验真实案例 · 安全可信
中心回转抓岩机参数详解
本文深入解析中心回转抓岩机的关键参数,包括工作半径、抓取能力和回转速度等核心指标,帮助读者全面了解设备性能与适用场景。

B2B Procurement Guide

When sourcing, verify the supplier’s explosion-proof certification documents and request third-party test reports. Compare drum materials (e.g., manganese steel vs. alloy) for wear resistance. Lead times for custom hoists range from 8–12 weeks. Total cost of ownership (TCO) should factor in energy-efficient motors (IE3/IE4 class) and availability of local service centers. Negotiate warranty terms (typically 1–2 years) and ask for case studies of similar installations. Bulk orders (5+ units) often attract 10–15% discounts.

Related Manufacturers