Overview
Environmentally friendly plastic defoaming masterbatch is a specialized additive designed to eliminate foam and bubbles during plastic processing. It is formulated to be non-toxic and compliant with environmental regulations, making it suitable for use in food packaging and other sensitive applications. The masterbatch is typically added to plastic resins during production, where it disperses uniformly to prevent foam formation. Its use enhances product quality by reducing surface defects and improving mechanical properties.
Physical and Chemical Properties
The masterbatch appears as white or light-colored granules with a density ranging from 0.9 to 1.2 g/cm³. It exhibits high thermal stability, allowing it to perform effectively at typical plastic processing temperatures. Its insolubility in water ensures compatibility with most thermoplastics, including polyethylene (PE), polypropylene (PP), and polystyrene (PS). The masterbatch is chemically inert, minimizing interactions with other additives or resins.
Main Applications
This defoaming masterbatch is widely used in the production of plastic films and sheets, where foam can cause visual and functional defects. It is also employed in injection molding and extrusion processes to ensure smooth, bubble-free surfaces. In addition to packaging, it finds applications in automotive parts, construction materials, and consumer goods. Its environmental safety makes it ideal for products requiring compliance with food-contact regulations.
Safety and Storage
The masterbatch is generally safe to handle, but standard industrial hygiene practices should be followed. Avoid inhalation of dust and use protective gloves when handling large quantities. Storage should be in a cool, dry place, away from direct sunlight to prevent degradation. Properly sealed containers are recommended to maintain product quality over time.
B2B Procurement Guide
When procuring this masterbatch, verify its compatibility with your specific plastic resins. Request technical data sheets and samples to test performance in your production processes. Consider suppliers with certifications for environmental compliance, such as REACH or FDA approval. Bulk purchases typically offer cost savings, but ensure storage conditions are adequate to preserve product quality.
Related Manufacturers
- 主营：干燥剂、吸水母粒、吸潮母粒、消泡剂、吸潮母料、除湿消泡、消泡母粒、消泡母料、吸水母料、塑料填充母料、拉丝平光剂
- 主营：塑料颗粒
- 主营：乙二醇、二甲基亚砜、丙二醇、灰白消泡母料、精对苯二甲酸、己二酸、聚乙烯醇、聚乙二醇、木质素、甘油、三甘醇、己内酰胺、叔十二硫醇、白油、对苯二甲酸二甲酯、4-丁二醇
- 主营：DMF、DMAC、二丙酮醇、灰白消泡母料、四甲基胍、马来酸酐、丙二醇、乙二醇、甲酸、甲醇、十二醇、柠檬酸、己二醇、甘油、四氢呋喃、碳酸丙烯酯、吐温、无水氯化钙、乙酸乙酯、氢氧化钠、二乙醇胺、司盘、过硫酸钠、氧化钙、氯化钾
- 主营：阻燃剂、乙酸镍、乙酸镝、灰白消泡母料、硫酸锂、硫酸锶、溴氨酸、香茅醇、肌氨酸、锂电池、四氢萘、磷酸铬、碳酸镁、碳酸镍、防冻剂、磷酸铝、叔丁醇、氟苯基、浮选剂、稀释剂、羟乙基、去除剂、庚二酸、除磷剂、十八烯、蛋白酶
- 主营：甜菊糖、氯乙酰、二乙苯、黑色消泡母料、酞菁绿、阻燃剂、4316-73-8、二戊烯、单甲醚、硫酸锂、4861-19-2、大理石、1192-62-7、羊脂酸、7783-40-6、磷酸氢、8002-74-2、7782-61-8、龙脑油、2842-44-6、聚甘油、二聚酸、戊二醇、聚醚f68、磺化油、1310-58-3
- 主营：淋膜专用填充料、白色母、透明填充料、塑料干燥剂、高添加塑料填充、膜类填充料、高速吹膜料
- 主营：白色色母、颜料、彩色色母、塑料抗氧化剂、色母、色母批发、色母定制、高浓度色母、珠光颜料、ABS色母、电线电缆色母、珠光色母、荧光颜料、吹膜色母、注塑色母、流纹色母、发泡剂、高光填充料、大理石色母、经济型白色色母、珍珠棉专用色母、高光黑色母、注塑通用色母、化工桶色母、pe色母
- 主营：玺聪母粒、色母粒、黑色母粒、消泡母粒、白色母粒、彩色色母
- 主营：二甲基亚砜、高纯度乙二醇、清洗剂、消泡剂、白电油
- 主营：PP发泡母粒、导电母粒、阻燃母粒、消泡母粒、黑色母、PP黑色母、PC黑色母、PA黑色母、POM黑色母、高光黑色母、注塑黑色母、硅酮母粒、云母粉母粒、高浓度黑色母、吹膜黑色母、拉丝黑色母、免喷涂黑色母、ABS黑色母、尼龙有机黑色母、苯胺黑色母、防静电母粒、开口母粒、吸水母粒、色素炭黑、导电炭黑
- 主营：二甲基亚砜、乙二醇、丙二醇、黑色消泡母料、DMAC
- 主营：蒸馏水、50%双氧水、柠檬酸钠、灰白消泡母料、N-甲基吡咯烷酮、呋喃、二甲基亚砜、纯碱、丙二醇丙醚、片碱、冰醋酸、磷酸、正丁醇、异丙醇、己二酸、二甲基甲酰胺、二甲基乙酰胺、甘油、四氯呋喃、环氧氯丙烷、精间苯二甲酸
- 主营：铝合金、元素分析、老化测试、塑料检测、汽车材料、第三方检测、高低温测试、质定性分析、成分分析方、检测机构检测、检测表面异物、第三方分析机、防尘防水试验
- 主营：乙酸镁、阻燃剂、热熔胶、消泡剂、聚合物、锂电池、光电极、泡泡糖、氯丁胶、碳酸镉、新癸酸、补差价、稀释剂、羟乙基、氧化铝、氧化铜、甲酸钾、c/c材料、碳酸锰、玻璃粉、硬光油、防腐剂、氧化铋、防水剂、聚丙烯、增粘树
- 主营：蛭石、云母、漂珠、硅藻土、膨润土、高岭土、防火涂料、萤石、石英砂、麦饭石、铝矾土、电气石、彩砂、鹅卵石、海泡石、重钙粉、重晶石、木粉、蛭石粉、氧化钙、生物质颗粒、贝壳彩片、莫来砂、蛭石板、沸石粉