Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

EN5311QI

Updated: 2026-08-07

Overview

The EN5311QI is a synchronous buck regulator designed to provide efficient voltage conversion in industrial and automotive applications. It supports a wide input voltage range, typically from 4.5V to 36V, and delivers a regulated output voltage with high efficiency. The device integrates advanced protection features such as thermal shutdown and overcurrent protection, ensuring reliable operation in harsh environments. Its compact design and high efficiency make it suitable for space-constrained applications, including power supplies for embedded systems, LED lighting, and automotive electronics. The EN5311QI is widely used in B2B markets due to its robustness and versatility.

Structure and Working Principle

EN5311QI 电源 QFN 输出电流 负载调节能力 效率 工作温度深圳市新思汇科技有限公司

The EN5311QI operates as a synchronous buck regulator, utilizing a step-down topology to convert a higher input voltage to a lower output voltage. It employs a pair of MOSFETs (high-side and low-side) to switch the input voltage, coupled with an inductor and capacitor to smooth the output. This design minimizes power loss and maximizes efficiency. The regulator includes a control loop that adjusts the duty cycle of the MOSFETs to maintain a stable output voltage, even under varying load conditions. Integrated protection circuits monitor temperature and current, shutting down the device if thresholds are exceeded to prevent damage.

商家经验真实案例 · 安全可信
调制解调器包退指南
本文详细介绍了调制解调器的包退流程和注意事项,包括适用情况、退货条件以及操作步骤,帮助用户在遇到问题时能够顺利办理退货。

Key Features

The EN5311QI stands out for its wide input voltage range (4.5V to 36V), making it adaptable to various power sources. Its high efficiency, often exceeding 90%, reduces heat generation and improves energy savings. The device also features a fixed switching frequency, simplifying EMI filtering in sensitive applications. Additional features include soft-start to limit inrush current, adjustable output voltage, and a power-good indicator. These attributes make the EN5311QI a versatile choice for designers seeking reliable power management solutions.

Application Areas

The EN5311QI is commonly used in industrial automation, automotive electronics, and telecommunications equipment. In industrial settings, it powers PLCs, motor controllers, and sensors. Automotive applications include infotainment systems, ADAS, and lighting modules. Its ability to operate in wide temperature ranges and resist electrical noise makes it suitable for harsh environments. The regulator is also found in consumer electronics, such as set-top boxes and networking devices, where efficient power conversion is critical.

Maintenance and Precautions

EN5311QI 电源 ALTERA(阿尔特拉) 封装BGA 批次21+深圳市华芝杰电子有限公司

To ensure longevity, the EN5311QI should be used within its specified voltage and current limits. Proper heat dissipation is essential, especially in high-temperature environments; a PCB with adequate copper area or a heatsink may be required. Avoid exposing the device to moisture or excessive vibration. Regularly inspect for signs of overheating or component degradation. Follow the manufacturer's guidelines for layout and grounding to minimize noise and ensure stable operation.

商家经验真实案例 · 安全可信
PSP有线游戏与接收器
本文解答了PSP游戏是否需要接收器以及适合的手柄类型,帮助玩家更好地选择和使用游戏设备。

B2B Procurement Guide

When procuring the EN5311QI, verify the supplier's authenticity to avoid counterfeit components. Request samples to test performance under your specific conditions. Bulk purchases typically offer cost savings, but ensure the supplier can meet your volume and delivery requirements. Check for compliance with industry standards such as AEC-Q100 for automotive applications. Compare lead times and pricing across multiple vendors to secure the best deal. Consider long-term availability and alternative part numbers to mitigate supply chain risks.

Related Manufacturers