Aicaigou LogoB2B WikiIndustrial Encyclopedia

eMMC32G-TA28 Embedded Memory

Updated: 2026-07-18

Overview

The eMMC 32GB TA28 is a standardized embedded MultiMediaCard solution combining NAND flash memory and a flash memory controller in a compact BGA package. It serves as a cost-effective storage solution for embedded systems where soldered-down storage is preferred over removable cards. As a JEDEC-standard component, it offers plug-and-play compatibility across a wide range of host processors and operating systems. The 32GB capacity version provides sufficient storage for operating systems, applications, and user data in many industrial and consumer applications.

Structure and Working Principle

天津回收报废主板 PCBA主板回收 电子元器件 回收此型号 批号24+深圳市福田区鑫恒源电子商行

The eMMC consists of three main components: NAND flash memory dies, a memory controller, and the interface logic. The controller handles wear leveling, bad block management, and error correction, significantly simplifying the host system design requirements. The TA28 package uses a ball grid array (BGA) layout for direct soldering to PCBs. It communicates with the host processor through a high-speed MMC interface, typically supporting data transfer rates up to 400MB/s depending on the interface version (eMMC 5.1 or later).

商家经验真实案例 · 安全可信
2100kVA变压器电流揭秘
本文解析2100kVA变压器在不同电压下的电流值,介绍三相与单相变压器的电流差异,并探讨影响电流的实用因素,助你全面了解变压器性能。

Key Features

This eMMC module offers several advantages over raw NAND solutions: simplified host processor requirements, built-in error correction, and standardized command sets. The 32GB capacity provides ample storage for most embedded applications while maintaining an optimal price point. Key performance characteristics include sequential read speeds up to 250MB/s and write speeds around 125MB/s. The device supports advanced power management features, making it suitable for battery-powered applications. Endurance ratings typically allow for thousands of program/erase cycles.

Application Areas

The eMMC 32GB TA28 finds widespread use in smartphones, tablets, set-top boxes, and various IoT devices. Its reliability and standardized interface make it particularly valuable for industrial applications including medical devices, automotive infotainment systems, and industrial control panels. In consumer electronics, it serves as the primary storage for Android devices and various embedded Linux systems. The automotive-grade variants meet stringent temperature and reliability requirements for in-vehicle applications.

Maintenance and Precautions

20864-010E全新原装连接器 I-PEX品牌系列 现货询价拍深圳市帝欧电子有限公司

Proper handling of eMMC modules requires attention to ESD protection throughout the supply chain. Manufacturers recommend storing components in anti-static packaging and using grounded workstations during installation. Soldering processes must adhere to the specified temperature profiles to prevent damage to the BGA package. System designers should implement proper power sequencing in their designs to avoid corruption during unexpected power loss scenarios.

商家经验真实案例 · 安全可信
高端芯片控制器抵押
本文解析高端芯片控制器抵押的关键要点,包括抵押流程、风险评估及行业特殊性,帮助相关从业者了解如何高效安全地进行抵押操作。

B2B Procurement Guide

When sourcing eMMC 32GB TA28 modules, verify the manufacturer's qualifications and product traceability. Key considerations include operating temperature range (commercial 0°C to 70°C or industrial -40°C to 85°C), endurance ratings, and production batch consistency. For high-reliability applications, request extended life cycle support documentation. Volume pricing typically becomes competitive at order quantities above 1,000 units, with lead times varying from 4-12 weeks depending on market conditions and specific manufacturer allocations.

Related Manufacturers