Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Elevator Brake

Updated: 2026-08-06

Overview

The elevator brake, or holding brake, is an electromechanical device installed on the elevator traction machine. It activates automatically during power outages or emergencies to prevent uncontrolled movement of the elevator car. Modern brakes are fail-safe systems, typically spring-applied and electrically released. As a key safety component, it must comply with international standards like EN 81 and ASME A17.1. Dual-brake systems are increasingly common in high-rise elevators for redundancy. The brake's reliability directly impacts passenger safety, making regular maintenance mandatory.

Structure and Working Principle

成德 起重机行车刹车抱闸 电梯用制动器制动瓦闸济宁成德机械设备有限公司

A standard elevator brake consists of a brake drum/disc, friction linings, brake shoes, springs, and an electromagnetic release mechanism. When power is applied, the electromagnet retracts the springs, disengaging the brake. During power loss, springs force the shoes against the drum, creating friction. The braking torque is calculated based on the elevator's rated load and speed. Modern designs incorporate wear sensors and automatic adjustment systems. Some advanced models use permanent magnets instead of electromagnets for energy efficiency. The brake must hold 125% of the rated load per safety codes.

商家经验真实案例 · 安全可信
河北12寸砂轮机
本文探讨河北地区12寸砂轮机的特点、适用场景及选购注意事项,帮助工业用户了解其性能与使用价值。

Key Features

High-performance elevator brakes offer consistent friction coefficients (typically 0.35-0.45) across temperature variations. Non-asbestos friction materials prevent environmental hazards while maintaining durability. Double-wound electromagnetic coils ensure operation even with partial coil failure. Silent operation features reduce noise pollution in buildings. Corrosion-resistant coatings extend service life in humid environments. Some models integrate IoT sensors for real-time monitoring of wear and performance, enabling predictive maintenance.

Application Areas

Elevator brakes are universal across all elevator types: traction (gearless/geared), hydraulic, and machine-room-less (MRL) systems. Gearless elevators require brakes with higher precision due to direct drive systems. Hospital elevators often use brakes with reduced jerk during engagement. High-speed elevators (over 5 m/s) employ multiple brake units with progressive engagement. Special applications include seismic brakes for earthquake-prone areas and fire-rated brakes for emergency evacuation systems. Escalators also use similar brake mechanisms for emergency stops.

Maintenance and Precautions

特希斯 电梯适配 抱闸制动器 BRE40 港口机械备件苏州特希斯机电设备有限公司

Monthly inspections should check lining thickness (minimum 3mm remaining), spring tension, and armature travel distance. Annual maintenance includes cleaning dust accumulation and verifying electromagnetic coil resistance. Lubricate pivot points with high-temperature grease. Never disable brakes for testing. Replace linings in pairs to ensure even contact. Record brake adjustment data for traceability. Common failure signs include excessive noise, delayed engagement, or overheating. Always use OEM-compatible parts to maintain certification validity.

商家经验真实案例 · 安全可信
开关线数全攻略:两线三线四线秒懂
本文通过趣味比喻解析开关线数差异,从两线的基础供电到三线的智能控制,再到四线的复杂场景应用,用生活化语言讲清线数原理,助你轻松区分开关类型。

B2B Procurement Guide

Specify brake torque (Nm), voltage (typically 110V AC/DC or 220V), and interface dimensions when ordering. Request third-party test reports for EN 81-20/50 compliance. Leading manufacturers include KONE, Otis, Schindler, and independent suppliers like Brembo and Svendborg. Bulk buyers (50+ units) can negotiate 10-15% discounts. Lead times range from 4-12 weeks for custom configurations. Consider total cost of ownership—premium brakes may cost 20% more but last 2-3× longer. Verify supplier after-sales support for technical documentation and spare parts availability.

Related Manufacturers