Overview
Electronics cleaning solvent, often referred to as '抹机水' in Chinese, is a specialized chemical formulation designed for cleaning electronic components and printed circuit boards (PCBs). It is engineered to dissolve and remove flux residues, oils, dust, and other contaminants without damaging sensitive electronic parts. This solvent is widely used in industries such as PCB manufacturing, electronic repair, and maintenance due to its effectiveness and safety for most substrates. The solvent is typically a blend of fast-evaporating hydrocarbons, alcohols, or other organic compounds. Its formulation ensures minimal residue after evaporation, which is critical for maintaining the electrical integrity of cleaned components. The product is available in various grades, ranging from industrial to high-purity versions suitable for critical applications.
Physical and Chemical Properties
Electronics cleaning solvent is characterized by its clear, colorless appearance and low viscosity, allowing it to penetrate tight spaces on PCBs. It has a relatively low boiling point, typically between 40°C and 80°C, which facilitates quick drying after application. The density usually ranges from 0.8 to 1.0 g/cm³, making it lighter than water. Key chemical properties include being non-conductive (to prevent short circuits), non-corrosive to most metals and plastics used in electronics, and having low surface tension for better wetting of surfaces. The solvent is generally miscible with other organic solvents but should not be mixed with water-based cleaners unless specifically formulated to do so.
Main Applications
The primary application of electronics cleaning solvent is in the removal of solder flux residues after PCB assembly. Flux residues, if left uncleaned, can lead to corrosion, electrical leakage, or poor adhesion of conformal coatings. The solvent is also effective for general degreasing of electronic components and cleaning of connectors and contacts. In repair and rework operations, the solvent is used to clean areas where components have been removed or replaced. Some specialized formulations are used for cleaning sensitive optical components or removing thermal paste from processors. The automotive electronics industry also utilizes these cleaners for maintaining control modules and sensors.
Safety and Storage
As a flammable chemical, electronics cleaning solvent requires careful handling and storage. It should be kept in approved containers away from heat sources and open flames. Storage areas should be well-ventilated to prevent vapor accumulation, and containers should be kept tightly closed when not in use. Personal protective equipment (PPE) including chemical-resistant gloves and safety goggles should be worn during use. If used in confined spaces, additional ventilation or respiratory protection may be necessary. Spills should be contained immediately using absorbent materials designed for organic solvents. Used solvent should be disposed of according to local environmental regulations.
B2B Procurement Guide
When procuring electronics cleaning solvent in bulk, several factors should be considered. First, verify the solvent's compatibility with the materials it will contact, including plastics, elastomers, and coatings used in your products. Check for relevant certifications such as ISO 9001 for quality management or RoHS compliance for environmental standards. For critical applications, consider requesting material safety data sheets (MSDS) and technical data sheets. Evaluate suppliers based on their ability to provide consistent quality, technical support, and reliable delivery. Bulk purchasing (typically in 20L or 200L containers) can offer significant cost savings, but ensure you have proper storage facilities. Some manufacturers offer customized formulations for specific applications.
Related Manufacturers
- 主营：氢氟醚、AK-225、六氯丙烯二聚体、电子氟化液、3M电子氟化液、电子清洗剂、六氟丙烯三聚体、HFC-365mfc、PCBA洗板水、环保清洗剂、碳氢清洗剂、马达转子清洗剂、防锈清洗剂、微电机转子清洗剂、干洗油、粉末冶金清洗剂、工业清洗剂、医疗器械清洗剂、HCFC-141b、正溴丙烷、甲基吡咯烷酮、无水乙醇、异丙醇、成品油、甲醇乙醇汽油
- 主营：分离剂、隔离剂、封边机、抹机水、清洁剂、手工洗板水
- 主营：排废机、切片机、跳刀机、550模切机、模切设备、ccd复合机、精密模切机、片材复合机、覆膜贴片机、全自动贴合机、多工位贴合机、防震泡棉模切、多层复合设备、超声波焊接机、光学薄膜贴合机、精密多层复合机、多层材料复合机、模切机、全自动模切机、圆刀模切机、多工位圆刀模切机、视觉检测机、多工位模切机、圆刀复合机
- 主营：煤矿氧气呼吸器、全液压坑道钻机、直读式粉尘测定仪、矿用乳化液泵配件、矿用钻机配件、煤矿消防救护、氧气测定器、灾区电话、氢氧化钙、二氧化碳吸收剂、煤矿绞车、煤矿注浆泵、矿用孔板流量计、轨道道口板、自动苏生器、空气呼吸器、氧气充填泵、消防破拆工具、道口板、消防救护器材、煤矿井下用自动隔爆装置、泄露通讯装置、抱索器
- 主营：卧式投影测量仪、数显显微维氏硬度计、膜厚仪、电子显微镜、拉力试验机、水平仪、硬度计、粘度计、金相显微镜、视频显微镜、扭矩检定仪、数显扭矩扳手、张力计、金相分析显微镜、CCD显微镜、同心度测量仪、Hvs-1000B显微维氏硬度计、二次元投影仪、分光测色仪、影像测量仪、投影测量仪、万能工具显微镜、二次元影像测量仪、2.5次元影像测量仪、二次元测量仪
- 主营：钢板坡口机、钢板铣边机、平板坡口机、薄膜包装机、管子坡口机、缠绕机、裹膜机、打包机、铣边机、倒角机、螺柱焊机、双面坡口机、钢管坡口机、切割坡口机、板材坡口机、管道坡口机、自动坡口机、翻转坡口机、厚板坡口机、手提式坡口机、便携式坡口机
- 主营：灌封胶、封装胶、散热硅脂、硫化硅橡胶、固化硅橡胶、硅胶密封胶、单组份硅胶、壳体密封胶、螺纹锁固剂、燃料电池密封胶、快干胶、环氧树脂结构胶
- 主营：防漏防尘工业包装袋、聚氨酯拍拍袋、聚氨酯发泡自动机、聚氨酯发泡手持机
- 主营：包装纸托、缓冲包装、内衬包装、纸浆模塑
- 主营：颗粒包装机、粉剂包装机、称重式包装机、立式卷膜包装机、杂粮包装机、胶粉包装机、淀粉包装机、炒货包装机、粮食包装机、食品包装机、石墨粉包装机、全自动包装机、小米包装机、大豆包装机、片碱包装机、管道疏通剂包装机、堵漏王包装机、兽药粉包装机、塑料颗粒包装机、树脂色母粒包装机、干燥剂包装机、水溶肥包装机、提升机、自动称重分装机、液体灌装机
- 主营：珍珠棉、缓冲材料、护角内衬、缓冲包装材料、海绵包装内衬、手表包装内托、彩盒内定位包装、EPE珍珠棉泡沫板、防撞珍珠棉片、芯片定位托盘、植绒托盘、EVA绒布底衬、EPE内衬、食品级中空板、白色内衬泡沫托、水果内衬托、通用缓冲垫、冲压成型EVA托盘、异型材泡沫棉内衬、水果运输内衬托、EVA珍珠棉内衬、EPE内衬泡沫棉、防震酒托盒内衬、EPE珍珠棉、EVA泡沫内衬
- 主营：泰科连接器、莫仕连接器、胡连连接器、原厂原包装、矢崎连接器、安普连接器、新能源汽车连接器、博世连接器、安波福连接器、JST连接器、HRS连接器、汽车连接器、线束连接器、汽车插接器、汽车护套、电路板接插件连接器、胶壳连接器、TE连接器、itt连接器、AMP连接器、PCB板端接插件、MOLEX连接器、德尔福连接器、APTIV连接器、汽车护套端子接插件、新能源高压连接器
- 主营：mm15n050p、晶闸管、mm15fu60k、标准包装、ixfn73n30、mm60f060p、mm60f060b、sdd100n12、sdd100n14、sdd100n16、mm8fu120k、mm30g120b、mm15f060k、ixfn90n30、mm20n050p、mm30f040p、保险丝、mm60f040b、mm30f120b、mm30f120k、mm75f120b、mm60f120b、mm30f060k、mm10f60k1、二极管、sdd100n08
- 主营：热收缩膜、快递打包收缩膜、pvc热收缩膜、真空包装袋、啤酒包装膜、塑料食品包装袋、食品包装膜、各种饮料类包装膜、矿泉水包装膜、消毒餐具包装膜、日用品包装膜、pe热收缩膜、POF 热收缩膜、缠绕膜、PVC收缩膜、POF收缩膜、彩印塑料袋、热收缩膜标签
- 主营：吹膜机、淋膜机、杯子机、变压器、电晕机、闭环控制、电晕配件、集成控制、电晕处理、处理发生器、电池箔电晕处、等离子处理系统、塑料薄膜电晕处
- 主营：聚四氟乙烯薄膜、黑色半导电膜、定向膜、车削膜、高强度防粘膜、导热硅胶皮、密封材料、绕包薄膜、聚四氟乙烯、缓冲材、FOG薄膜、COG薄膜、PCB软管、聚四氟乙烯填充制品、铁氟龙棒材
- 主营：3M结构胶、3M胶水、快干胶、3M电子胶、底涂、密封胶、3M喷胶、3M胶带、VHB胶带、环氧结构胶、丙烯酸结构胶、77喷胶、3M热熔胶、工业胶水、助粘胶水、75喷胶、粘接ab胶、口红胶水、橡胶胶水、橙香清洁剂