Overview
The Electro-Fenton Flotation Machine integrates two advanced water treatment technologies: electro-Fenton oxidation and dissolved air flotation (DAF). This hybrid system addresses limitations of conventional methods by generating hydroxyl radicals (•OH) through electrochemical reactions while using microbubbles to separate contaminants. Developed to treat recalcitrant industrial wastewater, it achieves removal rates of 85–95% for COD and 70–90% for heavy metals. Typical configurations include an electrolytic cell with catalytic electrodes, a flotation tank, a saturator for bubble generation, and a control system. Units range from 5 m³/day (pilot scale) to 500 m³/day (industrial scale), with modular designs allowing flexible expansion.
Structure and Working Principle
The machine consists of three core modules: (1) An electrolytic reactor with anode/cathode pairs, where Fe²+ catalysts and H2O2 generate •OH radicals to degrade organics. (2) A flotation tank where pressurized water releases 30–50 µm microbubbles, adhering to oxidized particles. (3) A sludge collection system with scraper mechanisms. During operation, wastewater first enters the electrochemical chamber, where direct current (5–20 V) drives Fenton reactions. The treated water then flows to the flotation unit, where bubbles lift flocs to the surface. Key parameters include current density (10–50 mA/cm²), hydraulic retention time (20–60 min), and air-to-solids ratio (0.01–0.1).
Key Features
1. Dual-action treatment: Simultaneous oxidation and physical separation enhance efficiency compared to standalone systems. 2. Energy optimization: Automatic current adjustment reduces power consumption by 15–30% versus traditional Fenton processes. 3. Minimal sludge production: Electro-coagulation effects decrease sludge volume by ~40% compared to chemical precipitation. Additional advantages include compatibility with automation (PLC control), resistance to shock loads, and the ability to handle wastewater with salinity up to 3%. The system typically achieves effluent COD < 100 mg/L when treating influent with 500–2,000 mg/L COD.
Application Areas
Primary industries deploying this technology include: 1. Textile manufacturing – Degrades azo dyes and sizing agents. 2. Pharmaceutical production – Treats antibiotic residues and high-TOC streams. 3. Landfill leachate – Removes refractory organics and ammonia. 4. Petrochemical plants – Processes phenolic wastewater and oil emulsions. Notable case studies include a Chinese dyeing factory achieving 92% COD removal (1,500 → 120 mg/L) at 200 m³/day capacity, and a Taiwanese electronics plant reducing nickel concentration from 15 mg/L to 0.3 mg/L. The system is particularly effective for wastewaters with pH 2–4 and temperatures below 45°C.
Maintenance and Precautions
Routine maintenance involves: 1. Weekly inspection of electrodes for passivation (clean with 10% citric acid if scaling exceeds 0.5 mm). 2. Monthly calibration of pH and ORP sensors. 3. Quarterly replacement of air saturation tank membranes. Critical operational precautions include maintaining Fe²+ dosage at 0.5–2 mmol/L, avoiding chlorine-rich influents (to prevent toxic byproducts), and ensuring proper grounding (resistance <4 Ω). Operators should monitor bubble size distribution monthly using microscopic analysis, as bubbles >70 µm reduce flotation efficiency by 15–20%.
B2B Procurement Guide
When sourcing Electro-Fenton Flotation Machines: 1. Specify influent characteristics (COD range, SS, conductivity) to right-size the system. 2. Verify electrode lifespan (typically 2–5 years for titanium-coated anodes). 3. Require FAT (Factory Acceptance Testing) with actual wastewater samples. Leading manufacturers include EnviroChem (Germany), Supure (China), and WPL (UK). Budget approximately $50–200/m³ of daily treatment capacity. For textile wastewater, prioritize units with additional oil-water separators. Consider leasing options for pilot testing (≈$3,000–$8,000/month).
Related Manufacturers
- 主营：[]
- 主营：气浮机、一体化污水处理设备
- 主营：一体化污水处理设备、医院污水处理设备、生活污水处理设备、气浮机、食品厂污水处理设备、含油油漆污水处理设备、印染污水处理设备、食品污水处理设备、沉淀池、净水设备
- 主营：[]
- 主营：[]
- 主营：气浮机、斜管沉淀池、一体化污水、一体化养殖
- 主营：气浮机、压滤机、微孔曝气器
- 主营：组件出水、除尘设备、脉冲除尘器、气浮机、一体化污水、污水处理设备
- 主营：厌氧滤池、凌科环保、玻璃钢泵站、气浮机、小型医疗院、一体化泵站、a型医疗设备、接触氧化设备、污水提升泵站、玻璃钢化粪池、玻璃钢一体化、气浮装置设备、中水回用设备、废水处理设备、二氧化氯发生器、一体化预制泵站、学校实验室设备
- 主营：一体化污水处理设备、斜管沉淀池、一体化净水设备、溶气式气浮机、电解法次氯酸钠发生器、全自动加药装置、三腔加药装置、二氧化氯发生器、地埋式一体化污水处理、一体化泵站、PP材质污水设备、净化槽、曝气生物滤池
- 主营：一体化污水设备、厌氧反应器、净水设备、气浮机、废水处理设备、不锈钢净水装置、供水设备
- 主营：絮凝沉淀池、一体化污水处理设备、生活污水处理设备、溶气气浮机、气浮机、电絮凝气浮机、医院污水处理设备、污水处理设备
- 主营：厌氧反应器、污水处理设备、一体化污水处理设备、溶气气浮机、带式压滤机、板框压滤机
- 主营：废水电解芬顿工艺处理、污水设备配套太阳能系统、太阳能供电系统
- 主营：[]
- 主营：各类污水处理设备、真空过滤设备、厌氧反应器、电絮凝气浮机、一体化污水处理设备、带式真空过滤机、加药装置等、过滤器、脱水设备、全自动加药装置、废水处理设备
- 主营：加药机、电控箱、浓缩机、气浮机、厌氧罐、玻璃钢、反应器、污水处、除污机、处理厌、净水器、过滤器、控制箱、清污机、配电箱、控制柜、拼装罐、压滤机、废水处、化粪池、防雨电箱、工业废水、沉淀过滤、气浮装置、太阳能板
- 主营：净化槽、穿梭式滚塑机、PE滤砖、溶气气浮机、电絮凝气浮机、厌氧反应器、MBR一体化
- 主营：气浮机、污水设备、一体化污水处理设备
- 主营：电解气浮机、废水处理设备
- 主营：溶气罐、耙齿格栅机、污水处理设备、溶气气浮机、小型实验气浮机、浅层气浮机、曝气生物滤池、机械格栅除污机、隔膜板框压滤机、一体化污水处理设备、小型污水处理设备、生活污水处理设备、化工污水处理设备、医疗污水处理设备、叠螺机、粪便脱水机、活性炭过滤器、加药装置、管道混合器
- 主营：一体化污水处理设备、厌氧反应器、氨氮去除设备、电絮凝气浮机、电芬顿设备、带式真空过滤机、全自动加药装置、太阳能供电系统
- 主营：一体化污水处理设备、生活污水处理设备、医疗污水处理设备、溶气气浮机、浅层气浮机、电解电絮凝气浮机、小型实验气浮机、养殖污水处理设备、多介质过滤器、微滤机、格栅除污机、带式污泥压滤机、叠罗式污泥压滤机、玻璃钢化粪池、一体式加药装置、无阀过滤器、曝气装置、斜管沉淀器、MBR一体化污水处理设备、板框式污泥压滤机、刮吸泥机、厌氧反应器、BAF曝气生物滤池、垃圾焚烧炉、氨氮吹脱塔
- 主营：电化学系列、真空过滤机、料仓、电解设备、刮吸泥机、纤维转盘/滤布滤池、反硝化滤池、重力式无阀滤池、一体化净水设备、PE一体化污水处理设备、厌氧塔、带式压滤机
- 主营：电解气浮机、污水处理设备、硫化罐、一体化污水处理设备
- 主营：电解气浮机、废水处理、一体化净水器
- 主营：一体化污水处理设备、格栅除污机、污泥浓缩脱水机、电解气浮机、溶气气浮机、小型实验气浮机、无阀过滤器、小型污水处理设备、多介质过滤器、带式污泥压滤机、板框式污泥压滤机、固液分离设备、生活污水处理设备、电镀污水处理设备、化工污水处理设备、医疗污水处理设备