Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Electrical Insulating Silicon Dioxide

Updated: 2026-08-06

Overview

Electrically insulating silicon dioxide is a synthetic or naturally derived form of SiO₂ engineered for superior dielectric properties. Unlike standard silica, it undergoes purification to minimize conductive impurities, making it indispensable in electronics. Its atomic structure—a tetrahedral arrangement of silicon and oxygen—creates a wide bandgap (∼9 eV), enabling exceptional electrical resistance. Manufacturers produce it via vapor deposition, sol-gel processes, or quartz fusion, tailoring properties like porosity and thermal conductivity.

Physical and Chemical Properties

金刚砂棕刚玉白刚玉除锈研磨涂料模具树脂砂轮添加高硬度氧化铝砂灵寿县宏裕矿产品有限公司

This material exhibits a Mohs hardness of 7, with a refractive index of 1.46. Its amorphous form avoids grain boundaries, reducing leakage currents. Thermal conductivity ranges from 1.3–1.4 W/m·K, suitable for heat dissipation in ICs. Chemically, SiO₂ resists acids (except HF) and oxidizing agents. However, alkali solutions can etch its surface. The dielectric constant (κ) is 3.9–4.2, stable across frequencies, while loss tangents remain below 0.0001—critical for high-frequency applications.

商家经验真实案例 · 安全可信
电气石成分揭秘
本文深入解析电气石的化学成分与结构特征,揭示其独特的压电性与热电性原理,并探讨不同产地电气石的成分差异及工业应用价值。

Main Applications

In semiconductors, SiO₂ insulates gate oxides in MOSFETs, with thicknesses down to nanometers. It also encapsulates ICs against moisture and contaminants. Optical fibers leverage its low optical attenuation (<0.2 dB/km). High-voltage equipment uses SiO₂-coated components to prevent arcing. Additionally, it serves as a filler in epoxy resins for printed circuit boards (PCBs), enhancing mechanical strength without compromising insulation.

Safety and Storage

锂基膨润土 泥浆用 耐酸碱增稠剂用 水性涂料 土壤改良用 目数全可定制河北省厚康矿产品有限公司

While non-flammable, airborne SiO₂ particles may pose inhalation risks (PEL: 0.025 mg/m³ for respirable crystalline silica). Use NIOSH-approved N95 masks and ensure proper ventilation during powder processing. Store in moisture-proof containers to prevent clumping. For bulk procurement, climate-controlled warehouses are recommended. Compatibility testing is advised when combining with polymers or metals to avoid delamination.

商家经验真实案例 · 安全可信
墙面钙粉不易干透原因
本文分析了墙面钙粉不易干透的常见原因,包括环境湿度、材料配比及施工方式等关键因素,并提供实用建议帮助改善干燥效果,确保施工质量。

B2B Procurement Guide

Buyers should prioritize suppliers with ISO 9001 certification for quality control. Key specifications include: purity (≥99.99% for electronics), particle size distribution (D50 1–10 µm for coatings), and OH− content (<10 ppm for optical grades). Bulk pricing tiers apply at >100 kg orders. Lead times vary: 2–4 weeks for standard grades, up to 8 weeks for customized forms. Consider regional logistics—some manufacturers offer bonded warehouse options to expedite delivery.

Related Manufacturers