Overview
Electric tailgate struts are electromechanical devices that replace traditional hydraulic lift supports in modern vehicles. These systems integrate an electric motor with a telescoping rod mechanism to provide automated tailgate operation. They are increasingly standard in mid-to-high-range passenger vehicles and commercial vans. Unlike manual struts, electric versions allow for remote activation via key fobs, dashboard buttons, or smartphone apps. Some advanced models incorporate position memory and speed adjustment functions. The technology has become particularly prevalent in European and Asian automotive markets since the early 2010s.
Structure and Working Principle
A typical electric strut assembly consists of three core components: a DC motor, a gear reduction system, and a linear actuator rod. The motor converts electrical energy from the vehicle's system into rotational motion, which is then translated into linear force through a ball screw or rack-and-pinion mechanism. The system includes position sensors that communicate with the vehicle's ECU to control travel limits and speed. Higher-end models may feature current monitoring for obstacle detection - if resistance is encountered during movement, the strut automatically reverses direction to prevent damage or injury. Most designs incorporate failsafe brackets to support the tailgate in case of power failure.
Key Features
Modern electric tailgate struts offer several performance advantages over mechanical alternatives. Their programmable operation allows for customizable opening heights and speeds, particularly useful for vehicles frequently parked in low-ceiling garages. Many systems include soft-start and soft-stop functions to minimize mechanical stress. Durability features typically include IP67-rated waterproofing, corrosion-resistant coatings, and wide temperature tolerance (-30°C to 85°C). Load capacities range from 40kg to 120kg depending on application. Some luxury vehicle versions integrate gesture control or foot-activated sensors for hands-free operation.
Application Areas
Primary applications include SUV rear hatches, minivan liftgates, and station wagon tailgates. The automotive aftermarket has seen growing demand for retrofit kits that convert manual systems to electric operation. Commercial applications extend to delivery vehicle rear doors and mobile workshop access panels. In the OEM sector, strut specifications vary significantly between vehicle classes. Compact cars typically use single-strut systems with 300-500N force capacity, while full-size SUVs may require dual-strut configurations with 800N+ per side. Emerging applications include RV compartment doors and emergency vehicle equipment portals.
Maintenance and Precautions
Routine maintenance involves annual inspection of electrical connectors and periodic cleaning of exposed rod surfaces. Silicone-based lubricants should be applied to telescoping sections every 20,000 operation cycles or as specified by the manufacturer. Avoid petroleum-based greases that may degrade rubber seals. Common failure points include motor brush wear (typically after 50,000 cycles) and seal deterioration in high-humidity environments. Installers should ensure proper alignment during fitting - angular misalignment exceeding 3° can significantly reduce service life. During winter operation, allow extra time for movement as cold temperatures may temporarily reduce motor efficiency.
B2B Procurement Guide
When sourcing electric tailgate struts, verify compatibility with specific vehicle makes/models through interchange databases like TecDoc or OEM catalogs. Key specifications to confirm include stroke length (usually 400-700mm), voltage requirements (12V or 24V systems), and mounting bracket geometry. Quality indicators include ISO/TS 16949 certification for automotive parts and ingress protection ratings. For bulk purchases, request duty cycle test reports (minimum 30,000 cycles at rated load). Lead times for custom-configured units typically range 4-8 weeks. Consider suppliers offering plug-and-play harnesses with vehicle-specific connectors to simplify installation.
Related Manufacturers
- 主营：内尾灯、改款灯
- 主营：机械设备、仪器设备、工业品、电动油脂泵、电动搅拌机、电动冲击夯、破碎锤、户外垃圾桶、汽车空调抽打泵、应急启动电源、石材加重机、阳台洗衣柜、冰淇淋机、玻璃钢雕塑、中空回转液压缸、UV打印机、激光打标机、液压总成、气动搅拌机、雕刻机、台式立式冰激凌机、液压破碎钳
- 主营：汽车零部件装配线、光模块自动化组装线、汽车电机自动化装配线、电动尾门装配线、汽车压缩机组装设备、自动化装配生产线、自动化装配线、自动组装机、汽车检测设备、电磁阀组装生产线、汽车SOV阀装配线、汽车零部件组装、新能源自动化流水线、自动化生产线、汽车传感器装配测试线、通信光模块自动装配线、电子膨胀阀组装线、非标自动化设备、汽车滤清器装配线、汽车碳罐阀线圈装配线、汽车仪表盘装配线、非标自动化生产线、汽车座椅排气阀装配线、汽车控制器组装线、热管理阀自动装配线、非标自动化设备定制
- 主营：冲击夯、摄影灯、识别秤、电动尾门撑杆、模温机、混色机、缝纫机、液压钳、冰淇凌、椭圆仪、写真机、烤鸡炉、配电箱、感应门、分散机、测量仪、除雪机、锂电池、感应机、去色剂、车丝机、小挖机、漂移车、鲜肉柜、喷漆枪、白胶机
- 主营：冷气泵、蒸发芯、机脚垫、起动机、差速器、倒车镜、方向柱、空调管、元宝梁、升降器、刹车片、减震器、中冷器、节温器、方向机、平衡杆、分动箱、涨紧轮、传动轴、喷油嘴、空调开关、三角玻璃、刹车总泵、车门玻璃、高配大灯
- 主营：奔驰拆车件、宝马拆车件、路虎拆车件、尾盖、保时捷拆车件、捷豹拆车件、大众拆车件、特斯拉拆车件、法拉利拆车件、宾利拆车件、玛莎拉蒂拆车件
- 主营：尾门撑杆电机、无刷电机、有刷电机、扫地机马达
- 主营：发动机、变速箱、涡轮增压器、X5尾门撑杆、差速器、分动箱、电脑板、减震器、发电机、助力泵、空调压缩机、大灯、车门
- 主营：东风猛士CSK181、东风猛士EQ2050、东风EQ2102、东风EQ2082E6D、东风猛士EQ2060、东风猛士CSK141、东风EQ240、东风EQ245、东风六轮EQ246、东风EQ1093F6D、东风猛士轮胎、东风新EQ1120GA运兵车、越野轮胎、东风分动箱、东风轮边减速器、东风前驱动桥、东风车篷布、东风摄像头红外、东风猛士悬架三角臂、东风越野客车、东风运兵车EQ1118GA、东风变速箱、东风车轮、东风传感器电磁阀、东风大箱木板座椅
- 主营：支撑杆、气弹簧、气压杆
- 主营：抹平机、倒角器、鱼鳞机、后备箱支撑杆、去皮刀、宰鱼刀、抹光机、水温表、钢缆锁、电瓶锁、手工刨、温度计、锚鱼钩、倒钓钩、驾驶棚、灌浆枪、帐篷灯、紧停钮、万向轮、控制盒、三本钩、挡油板、木工刨、钓鱼包、填缝枪、鲟鱼钩
- 主营：评估板、热风枪、打磨笔、电动阀、警示牌、医药箱、隔膜泵、开发板、伸缩杆、氛围灯、曲线笔、抽水泵、加湿器、发热芯、污水泵、乳胶漆、调压器、下水器、雾化头、测定仪、调节阀、and量杯、电热炉、电脑板、烧烤炉
- 主营：倒角器、破窗器、配件包、支撑杆、打草轮、输出线、鱼护袋、测量仪、打钉枪、剥线钳、热电偶、合金钻、放大器、视频线、冰铲刀、音频线、传感器、钓鱼桶、镇流器、手工锯、接线盒、钉箱机、开孔器、春联纸、射钉机、一体桶
- 主营：汽车配件
- 主营：货箱宝、行李条、车盖罩、尾门缓冲液压杆、合页锁头、工具杂物箱、高盖货箱盖、高盖后箱盖、三开门后箱盖、皮卡车后箱盖、龙门架平台筐、易冲洗胶脚垫、手动卷帘后箱盖
- 主营：爬树鞋、抛光膏、拉杆袋、液压支撑杆、行李车、小拉车、小推车、爬杆器、压榨机、脚爬树、榨汁机、手拉车、老花镜、润滑油、木工凿、拉铆枪、拉钉枪、铆钉枪、润滑脂、擦亮膏、抛光蜡、抹泥刀、购物车、泡酒瓶、欧文木凿、树脚扎子