Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

DS28EC20+

Updated: 2026-07-25

Overview

The DS28EC20+ is a 1-Wire EEPROM memory chip developed by Maxim Integrated (now part of Analog Devices). It provides 20 kilobits (2560 bytes) of non-volatile memory storage with a unique factory-lasered 64-bit ROM ID for secure device identification. The device communicates via the 1-Wire protocol, which requires only a single data line plus ground reference, making it ideal for space-constrained applications. The chip is commonly used in industrial control systems, medical equipment, and consumer electronics where reliable data storage and device authentication are required. Its low power consumption (active current typically 1.5mA) makes it suitable for battery-powered applications. The DS28EC20+ operates across a wide temperature range (-40°C to +85°C), ensuring reliability in harsh environments.

Structure and Working Principle

原装DS28EC20+T 电子元器件 MAXIM美信 封装TO-92 批号26+深圳市中芯巨能电子有限公司

The DS28EC20+ consists of a memory array, control logic, and 1-Wire interface circuitry fabricated using CMOS technology. The memory is organized as 80 pages of 32 bytes each, with built-in error detection (CRC16) for data integrity verification. The 64-bit ROM ID includes an 8-bit family code (0x43), 48-bit unique serial number, and 8-bit CRC. The 1-Wire interface operates through a single open-drain I/O pin, using precise timing protocols for communication. Data transfer occurs at standard speed (15.4kbps) or overdrive speed (125kbps). The chip derives power from the data line during communication (parasitic power mode) or can be connected to an external supply. Memory operations include read, write, and copy scratchpad commands with built-in write protection features.

商家经验真实案例 · 安全可信
kw5151d芯片替代方案
本文探讨了kw5151d芯片的替代方案,分析了同类型芯片的性能参数和兼容性,并提供了选择替代芯片时的注意事项,帮助工程师在采购时做出合理决策。

Key Features

The DS28EC20+ offers several distinctive features that make it valuable for embedded systems. Its 1-Wire interface dramatically reduces wiring complexity compared to traditional memory chips, requiring just two connections (data and ground). The built-in 64-bit ROM ID provides guaranteed unique identification, essential for anti-counterfeiting and authentication applications. Other notable features include 100-year data retention, up to 1 million write cycles endurance, and a small 6-pin TSOC package (3mm x 3mm). The chip supports both parasite power and external power modes, with automatic switching between modes. Advanced security features include write protection for memory pages and a software-accessible EPROM emulation mode that allows bits to be changed from 1 to 0 only.

Application Areas

The DS28EC20+ finds widespread use across multiple industries due to its reliable memory and identification capabilities. In industrial automation, it's used for equipment calibration data storage, sensor identification, and maintenance tracking. Medical applications include storing device configuration data and tracking disposable components. Consumer electronics manufacturers utilize these chips for printer cartridge authentication, gaming peripheral identification, and smart appliance configuration storage. The device is also popular in logistics for tracking high-value assets and in building automation for sensor node identification. Its small size and simple interface make it ideal for embedded systems where board space is limited.

Maintenance and Precautions

DS28EC20P+T 电子元器件 6-LSOJ PDF 数据手册 资料 规格书深圳市新思汇科技有限公司

Proper handling and implementation of the DS28EC20+ ensures optimal performance and longevity. ESD precautions must be observed during handling and installation, as the CMOS circuitry is sensitive to static discharge. The device should be stored in anti-static packaging when not in use. System designers should ensure proper pull-up resistors (typically 1kΩ to 4.7kΩ) on the 1-Wire bus and implement robust communication timing to avoid data corruption. When using parasite power mode, careful attention must be paid to power delivery during write operations, which may require a strong pull-up (MOSFET) to provide sufficient current. The chip's operating voltage range (3.0V to 5.25V) must not be exceeded to prevent damage.

商家经验真实案例 · 安全可信
光波导技术
本文探讨光波导技术的原理、应用场景及未来发展趋势,解析其在AR/VR、通信和医疗等领域的关键作用,展现这一技术的革新潜力。

B2B Procurement Guide

When procuring DS28EC20+ chips for business use, several factors should be considered to ensure quality and reliability. Always source from authorized distributors or directly from Analog Devices to avoid counterfeit components, which are common in the semiconductor market. Verify lot codes and date stamps for freshness, as prolonged storage can affect performance. For volume purchases (1000+ units), negotiate pricing based on current market conditions, with typical discounts of 15-30% off list price. Lead times can vary from 4-12 weeks depending on inventory levels. Consider purchasing evaluation kits (such as the DS28EC20EVKIT) for testing compatibility with your application before committing to large orders. For critical applications, request full datasheet specifications and consider additional quality assurance testing.

Related Manufacturers