Aicaigou LogoB2B WikiIndustrial Encyclopedia

DS2502P+

Updated: 2026-08-28

Overview

The DS2502P+ is a 1-Wire Add-Only Memory device manufactured by Maxim Integrated (now part of Analog Devices). It provides a cost-effective solution for secure identification and data storage in industrial and embedded systems. The device is housed in a TO-92 package, making it suitable for various applications where space and power constraints are considerations. As a 1-Wire device, it requires only a single data line plus ground for communication, simplifying system design. The DS2502P+ is particularly valued for its robustness and reliability in harsh environments, operating across a temperature range of -40°C to +85°C.

Structure and Working Principle

DS2502P+TR 电子元器件 POWER 封装QFN32 批号19+深圳诚思涵科技有限公司

The DS2502P+ consists of three main components: a 64-bit lasered ROM that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit family code (09h). This ROM serves as an unalterable device identifier. The memory section comprises 1KB of EPROM organized into four pages of 256 bits each. The device operates on the 1-Wire protocol, which allows bidirectional communication over a single conductor. Data transfer occurs at standard speed (15.3kbps) with strict timing requirements. The EPROM memory can be written once (with subsequent bits changeable from 1 to 0) but cannot be erased, making it ideal for applications requiring secure, non-volatile storage.

商家经验真实案例 · 安全可信
收发器当天发货档
本文解析工业级收发器当天发货的常见服务等级,包括常规发货、加急处理与特殊通道的区别,并说明影响发货速度的关键因素,帮助采购方合理规划项目周期。

Key Features

The DS2502P+ offers several distinctive features that make it valuable for industrial applications. Its 64-bit ROM provides a unique identifier for each device, enabling reliable identification of components or systems. The 1KB EPROM allows for secure storage of calibration data, manufacturing information, or other critical parameters. A significant advantage is the device's wide operating voltage range (2.8V to 6.0V), which accommodates various system designs. The 1-Wire interface dramatically reduces wiring complexity compared to traditional memory devices. The device also features a strong data integrity mechanism with CRC verification of all data transfers.

Application Areas

The DS2502P+ finds application in multiple industries where secure identification or data storage is required. In industrial automation, it's used for equipment identification and calibration data storage. The medical device industry employs it for instrument authentication and usage tracking. Other common applications include printer cartridge identification, consumable authentication systems, and asset tracking solutions. The device's one-time programmable memory makes it particularly suitable for systems requiring counterfeit protection or secure parameter storage that cannot be modified in the field.

Maintenance and Precautions

DS2502P+T&R 电子元器件 MAXIM/美信 封装SOP 批号26+深圳市高科世纪电子有限公司

While the DS2502P+ is a robust device, certain precautions should be observed during handling and operation. As with all semiconductor devices, it is sensitive to electrostatic discharge (ESD); proper ESD precautions should be followed during installation and handling. When implementing the 1-Wire interface, attention must be paid to signal timing and pull-up resistor values to ensure reliable communication. The device's EPROM memory has a limited number of partial write cycles (typically 200 per bit), so write operations should be carefully planned to maximize memory utilization.

商家经验真实案例 · 安全可信
青耀芯片配置
本文探讨青耀芯片的配置特点,包括其硬件架构、性能表现及适用场景,帮助读者全面了解该芯片的技术优势和应用潜力。

B2B Procurement Guide

When procuring DS2502P+ devices in bulk for industrial applications, several factors should be considered. Verify the supply chain authenticity to avoid counterfeit components, as these devices are sometimes targeted for cloning. Check for proper packaging and handling to ensure ESD protection during transit. Consider ordering directly from authorized distributors or the manufacturer to guarantee genuine parts. Lead times can vary, so plan procurement accordingly. For high-volume applications, discuss potential customization options with the manufacturer, though the DS2502P+ is typically offered as a standard product.

Related Manufacturers