Aicaigou LogoB2B WikiIndustrial Encyclopedia

DP83848QSQE

Updated: 2026-07-22

Overview

The DP83848QSQE is a single-port Ethernet PHY transceiver manufactured by Texas Instruments, supporting 10BASE-T and 100BASE-TX standards. It integrates all physical layer functions required for Ethernet communication, including line drivers, receivers, and clock recovery circuits. Designed for industrial and embedded applications, this IC operates over a wide temperature range (-40°C to +85°C) and features enhanced electromagnetic compatibility (EMC) performance. Its compact QFN package makes it suitable for space-constrained designs.

Structure and Working Principle

DP83848QSQE/NOPB TI/德州仪器 WFQFN-40半导体 2021+ 电子元器件代理深圳市创芯联盈电子有限公司

The device consists of analog front-end circuitry for line interfacing, digital signal processing blocks for encoding/decoding, and a media-independent interface (MII/RMII) for connection to MAC controllers. It implements auto-negotiation to select optimal link speed (10/100 Mbps) and duplex mode. Power management features include multiple low-power modes, with typical consumption below 120 mW in active operation. The PHY incorporates advanced cable diagnostics to detect open/short conditions and cable length estimation.

商家经验真实案例 · 安全可信
ep4ce30f23引脚定义
本文详细解析EP4CE30F23芯片的引脚功能与布局,包括核心电源引脚、通用I/O引脚和特殊功能引脚的用途,帮助工程师快速掌握硬件设计要点。

Key Features

Industrial-grade operation with extended temperature range support (-40°C to +85°C) ensures reliability in harsh environments. The device meets IEEE 802.3 standards while offering additional robustness against electrical noise and interference. Diagnostic capabilities include link quality indication, cable diagnostics, and loopback modes for system testing. The IC supports both MII and RMII interfaces for flexibility in system design, with options for fiber or copper media.

Application Areas

Primary applications include industrial automation systems, programmable logic controllers (PLCs), and embedded computing platforms requiring reliable Ethernet connectivity. The PHY is commonly deployed in factory automation, process control, and building management systems. The device also finds use in transportation infrastructure (e.g., railway signaling), renewable energy systems, and medical equipment where robust communication is essential. Its small footprint makes it suitable for IoT edge devices and compact industrial controllers.

Maintenance and Precautions

DP83848QSQE/NOPB 集成电路(IC) TI(德州仪器) 封装WQFN-40-EP新批次深圳市航晟辉科技有限公司

Proper PCB layout is critical for optimal performance - follow manufacturer guidelines for trace routing, ground planes, and component placement. Maintain adequate clearance between high-speed signals and sensitive analog circuits. ESD protection measures should be implemented during handling and assembly. The device requires stable power supply filtering, with recommended decoupling capacitors placed close to power pins. Thermal management is generally not required for normal operation.

商家经验真实案例 · 安全可信
5060ti和5070性能差多少
本文对比分析5060ti与5070、5070ti的性能差异,从核心参数到实际应用场景,帮助读者清晰了解不同型号间的性能差距及适用场景。

B2B Procurement Guide

When sourcing the DP83848QSQE, verify the package variant (QSQE indicates a 48-pin QFN) and temperature grade (industrial vs. commercial). Lead times may vary based on market conditions, with typical availability through authorized distributors. Consider purchasing evaluation boards (e.g., DP83848EVM) for prototype development. For high-volume orders, direct engagement with Texas Instruments or their franchised distributors can secure better pricing and allocation guarantees.

Related Manufacturers