Overview
Diva Water-Based Release Agent is a specialized chemical formulation designed to facilitate the easy release of molded parts from their molds without damaging the surface. It is widely favored in industries such as automotive, aerospace, and construction for its eco-friendly composition and high performance. Unlike solvent-based alternatives, this water-based release agent minimizes volatile organic compound (VOC) emissions, making it safer for both workers and the environment. Its versatility allows it to be used with various materials, including composites, concrete, and plastics.
Physical and Chemical Properties
The Diva Water-Based Release Agent is typically a clear or milky liquid with a density close to that of water (approximately 1.0 g/cm³). It is miscible with water and exhibits excellent wetting properties, ensuring even coverage on mold surfaces. Key chemical properties include its non-toxic nature and low VOC content, which comply with environmental regulations. The agent evaporates cleanly, leaving no residue that could interfere with subsequent processes or final product quality.
Main Applications
This release agent is extensively used in composite manufacturing, where it ensures the smooth release of fiberglass, carbon fiber, and other composite materials from molds. It is also popular in concrete casting, particularly for architectural elements and precast components. In the rubber and plastic industries, the agent prevents sticking and reduces mold fouling, thereby extending mold life and improving production efficiency. Its water-based formulation makes it particularly suitable for applications where solvent residues are undesirable.
Safety and Storage
While the Diva Water-Based Release Agent is generally safe, standard precautions should be observed. Avoid prolonged skin contact and inhalation of mist during application. In case of contact, rinse thoroughly with water. Storage should be in a cool, dry place to prevent freezing or degradation. Containers should be tightly sealed to avoid contamination. The product typically has a shelf life of 12-24 months when stored properly.
B2B Procurement Guide
When procuring Diva Water-Based Release Agent, consider factors such as concentration, compatibility with specific molds and materials, and environmental certifications. Bulk purchases often attract discounts, but ensure proper storage facilities are available. Reliable suppliers should provide technical data sheets (TDS) and material safety data sheets (MSDS) for verification. For large-scale applications, request samples to test performance under actual operating conditions before committing to bulk orders.
Related Manufacturers
- 主营：玻璃钢、环氧树脂、风电叶片、卫浴脱模剂、水性脱模剂、球拍网球拍、热固化树脂
- 主营：四氢噻吩、三甲基戊烷、乙硫醇、脱模剂、二甲基亚砜、氧化三甲胺、环丁砜、正己烯、单氰胺、氟硅酸、氯乙酸、氯乙酸钠、叔丁硫醇、对叔丁基邻苯二酚、氟硼酸、溶剂油、乙硫氨酯、苯扎溴铵、三聚氯氰、亚磷酸三苯酯、对氟苯胺、正己烷、邻苯基苯酚、苯酚、叔十二硫醇、二甲基二硫醚
- 主营：十八醇、十六酸、脂肪酸、脱模剂、月桂酸、丙三醇、十八酸、棕榈酸、硬脂酸、十二酸、瓜尔胶、脂肪粉、甘油、肉豆蔻酸、十二醇、十六醇、十六十八醇、硅油、丙二醇、鲸蜡硬脂醇
- 主营：鳞片石墨、石墨粉、导电石墨、润滑脱模剂、石墨乳
- 主营：氢氧化钠、氢氧化钾、硬脂酸钙、脱模剂、十四酸、柠檬酸、聚合氯化铝、亚硝酸钠、保险粉、硫酸镍、硬脂酸锌、硫酸铜、碳酸锂、葡萄糖、焦磷酸钾、草酸、七钼酸铵、雕白粉、钼酸钠、二氯甲烷、冰醋酸、活性炭、水杨酸、磷酸、丙三醇
- 主营：乳化油、金属切削液、铜拉丝乳化油、混凝土脱模剂、防火板脱模剂、铝拉丝油、防锈乳化油
- 主营：凡士林、工业级凡士林、工业级白油、脱模剂、桶装凡士林、白凡士林、无色透明白油、化妆品级凡士林、白油、石油脂、润滑脂、工业白油、液体石蜡、石蜡油、10#白油、15#白油、橡胶增塑剂
- 主营：特种润滑油脂、克鲁勃、摩力克、脱模剂、THK油脂
- 主营：稀释剂、虫胶片、脱漆剂、润滑脱模剂、蒙脱石、脱霉剂、漂白剂、石灰氮、粘合剂、除锈剂、清洗剂、活性染料、二氯丙烷、二氯甲烷、土壤杀菌、氟硅酸钠、环保溶剂、酚醛树脂、硝酸铁、氯化钡、硫酸氢钠、甲酸、三氯化铝、二氯乙烷、二氯异氰尿酸钠、固体次氯酸钠
- 主营：金刚砂、金刚砂地坪材料、石英砂、脱模剂、棕刚玉、夜光石、石子
- 主营：导电粉、石墨粉、云母粉、脱模剂、电气石、鹅卵石、烧烤砂、陶土粉、彩虹石、玉米芯、莫来石、石英砂、白垩土、矿物纤维、玻璃珠、粘土粉、硅微粉、凹凸棒土、岩片、硅藻土、海泡石纤维、白云石粉、陶瓷颗粒、核桃砂、高岭土、火山石
- 主营：蛭石、硅藻土、椰糠、脱模剂、稻壳碳、金刚砂、玻璃粉、麦饭石、火山石、重晶石、高岭土、白炭黑、玻璃砂、贝壳粉、氧化铁、重钙、沸石
- 主营：酒石酸、苯甲酸、苯丙乳液、脱模剂、背胶乳液、酸度调节剂、高效胶粘剂、玻璃幕墙清洗剂、卡松防腐剂、升华水杨酸、松香酸钠、消泡剂、苯甲酸钠、松香
- 主营：镭雕粉、镭雕母粒、镭雕助剂、脱模剂、阻燃剂、阻燃母粒、抗滴落剂、增韧剂、润滑剂、相容剂、成核剂、抗氧化剂、磷酸酯类阻燃剂、开口爽滑剂、紫外线吸收剂
- 主营：防腐剂、甲酸钙、消泡剂、脱模剂、涂料乳液、多功能助剂、工业级卡松、二甲基酮肟、工业硫酸铜、原料水杨酸钠、水性涂料助剂、工业级粘合剂、建筑水泥早强剂、工业级三乙醇胺、柠檬酸、苹果酸、硫醇甲基锡(有机锡)、松香、松香甘油酯、苯甲酸钠、苯甲酸、酒石酸