Overview
Desulfurization lined rubber pipes are critical components in flue gas desulfurization (FGD) systems, primarily used in coal-fired power plants and chemical processing facilities. These pipes combine the structural strength of steel with the chemical resistance of rubber linings to handle highly abrasive and corrosive slurries containing limestone, gypsum, or other absorbents. Their design addresses two major challenges in desulfurization systems: the abrasive nature of particulate matter in slurries and the corrosive effects of acidic environments. The rubber lining acts as a protective barrier, significantly extending the pipe's service life compared to unlined alternatives.
Structure and Working Principle
These pipes feature a three-layer construction: an outer steel shell for structural support, an adhesive bonding layer, and an inner rubber lining that directly contacts the slurry. The steel shell typically ranges from 6mm to 20mm in thickness, while the rubber lining varies from 5mm to 15mm depending on application requirements. The working principle relies on the rubber's elastomeric properties to absorb impact energy from abrasive particles while maintaining chemical resistance. When slurry flows through the pipe, the rubber lining flexes slightly upon particle impact, reducing wear rates compared to rigid materials. This design can reduce maintenance costs by up to 70% compared to unlined pipes in similar applications.
Key Features
The most significant feature is the rubber lining's dual resistance to both chemical corrosion and mechanical abrasion. Natural rubber linings offer excellent abrasion resistance, while synthetic rubbers like EPDM provide better resistance to higher temperatures (up to 120°C) and acidic conditions. Additional features include vibration dampening properties that reduce noise and stress on supporting structures, and the ability to handle high-velocity slurries (typically 2-6 m/s). Some advanced versions incorporate wear indicators in the lining or use multiple rubber layers with different hardness grades for optimized performance across different wear zones.
Application Areas
Primary applications are in power plant FGD systems for transporting limestone slurry to absorption towers and circulating gypsum slurry. They're also used in scrubber recycle loops, slurry feed lines, and discharge pipelines. Beyond power generation, these pipes serve in metallurgical plants for acid leaching processes, mining operations for tailings transportation, and chemical plants handling corrosive media. The pharmaceutical and food industries sometimes use food-grade rubber linings for specialized applications requiring both corrosion resistance and hygienic properties.
Maintenance and Precautions
Regular inspection is crucial - check for lining cracks, bulges, or detachment every 3-6 months depending on service conditions. Use ultrasonic thickness gauges to monitor lining wear without dismantling the pipe. Avoid water hammer effects by implementing proper valve operation procedures. During installation, prevent damage to the rubber lining by using proper lifting techniques and avoiding sharp impacts. For repairs, only use manufacturer-approved rubber compounds and curing methods. Storage precautions include keeping pipes in a dry environment away from direct sunlight and ozone sources to prevent rubber degradation before installation.
B2B Procurement Guide
When procuring these pipes, specify the exact slurry composition (pH, temperature, particle size distribution) to determine the optimal lining material. Consider total cost of ownership rather than just initial price - high-quality linings may cost 20-30% more but last 2-3 times longer. Key procurement factors include: pipe diameter tolerance (±1% typically), rubber hardness (usually 50-70 Shore A), and connection methods (flanged ends are common). Lead times vary from 4-12 weeks depending on customization requirements. For large projects, request sample sections for preliminary wear testing under simulated conditions.
Related Manufacturers
- 主营：衬四氟管件、衬塑管件、衬塑弯头、衬塑管道、衬胶管道、衬四氟管道、衬胶弯头、衬胶三通、衬胶钢管、衬塑三通、衬四氟三通、衬四氟弯头、衬塑钢管、衬四氟钢管
- 主营：衬塑管、双面衬塑钢管、缩合式衬塑钢管、衬塑管道、衬塑管道混合器、管道静态混合器、衬四氟管道混合器、静态管道混合器、衬胶变径管、脱硫衬胶管、衬胶三通、衬胶弯头、衬胶管道、SK型管道混合器、DN300管道混合器、脱硫衬胶管件、矿浆输送衬胶钢管、脱硫橡胶弯头、衬胶缸盖管件、冷热水衬塑钢管、不锈钢静态混合器、衬四氟管件、衬塑管件、钢衬聚乙烯管、钢衬塑管
- 主营：防腐钢管、涂塑钢管、保温钢管、直埋热力保温管道厂、螺旋钢管、管件、法兰、弯头、三通、热浸塑钢管
- 主营：超高压泵管、混凝土布料机、水泵管、充填管道、深井泵管、陶瓷弯头、堆焊钢管
- 主营：防腐钢管、3PE防腐钢管、保温钢管、脱硫内衬胶管道、涂塑复合钢管、螺旋钢管
- 主营：衬塑钢管、衬塑管件、合金管件、衬胶管件、衬胶管道、管道混合器、脱硫衬胶管道、内外钢塑复合钢管、碳钢管道混合器、污水处理衬胶管道、矿山矿井耐磨管道、丁基橡胶衬胶管件、加药管道混合器、脱硫衬胶钢管、耐磨衬胶管、钢衬塑管道、管式静态混合设备、陶瓷耐磨钢管、衬塑钢管管件、高压合金管件、钢衬塑管
- 主营：衬胶钢管、衬塑管道、钢衬胶储罐、衬四氟管道、内衬橡胶钢管、四氟储罐、镀锌衬塑钢管、高压衬四氟钢管
- 主营：双金属耐磨三通、高压不锈钢法兰、双金属耐磨异径管、管道混合器、衬四氟管道、钢衬四氟管道混合器、衬塑管道混合器、尾矿输送衬胶管、衬四氟衬塑管道混合器、耐磨衬胶管道、化工用内衬橡胶管、衬四氟管道混合器、堆焊复合钢管、平焊带颈法兰、钢衬塑化工复合钢管、工程用衬塑钢管、钢衬塑三通、双金属耐磨弯头、衬塑弯头、衬四氟气液混合器、乙型平焊法兰、sv静态混合器、衬四氟弯头
- 主营：碳素管、低压管、蒸汽管、衬塑管道、工业管、直缝管、冷拉管、裂化管、化肥管、化工管、船舶管、桥梁管、缝钢管、埋钢管、衬塑管、热轧管、焊接管、压力管、专用管、管线管、支撑架、输送管、结构管、无缝管、流体管、套筒管
- 主营：橡胶管道、钢衬胶管道、内衬衬胶钢管、碳钢衬胶钢管、内衬脱硫管件、内外衬胶管件、衬 胶管道管件、丁基橡胶管、丁基橡胶耐磨管
- 主营：衬胶管道、脱硫喷淋管道、衬胶衬塑管件、钢衬塑弯头、钢衬橡胶管件、丁基橡胶钢管
- 主营：瑞浩达防腐管道、瑞浩达保温管道、瑞浩达化工管道、瑞浩达管道配件、瑞浩达消防管道、瑞浩达电力电缆管道、瑞浩达燃气给水管道、瑞浩达污水处理管道、瑞浩达蒸汽管道
- 主营：涂塑复合钢管、聚氨酯保温管、钢套钢蒸汽保温管、衬塑管道、热浸塑管、给排水涂塑复合钢管、石油套管、防腐钢管
- 主营：乙烯管、钢塑复合管、钢衬塑复合管、衬胶钢管、衬胶管件、衬塑管道、钢衬胶弯头、钢衬四氟管道、防腐管道管件、衬塑防腐钢管、耐腐蚀衬塑管、耐酸碱衬氟管、丁基橡胶复合管
- 主营：耐磨弯头、陶瓷环耐磨
- 主营：防腐钢管、保温钢管、涂塑钢管、衬塑衬胶管道、螺旋钢管