Overview
Dacromet full thread bolts are specialized fasteners treated with a zinc-aluminum flake coating (Dacromet) for exceptional corrosion resistance. Unlike traditional galvanized bolts, the Dacromet process involves no electroplating, eliminating hydrogen embrittlement risks. These bolts are threaded along their entire shank, providing uniform load distribution and versatility in assembly. The coating consists of zinc flakes, aluminum flakes, and chromates suspended in an inorganic binder, baked at high temperatures to form a tightly bonded layer. This makes them ideal for applications exposed to salt, humidity, or chemicals, such as automotive underbodies, electrical towers, and offshore equipment.
Structure and Working Principle
The bolt’s structure comprises a standard threaded design (metric or imperial) with a Dacromet-coated surface. The coating works sacrificially: zinc flakes corrode preferentially to protect the steel substrate, while aluminum flakes create a barrier against moisture and oxygen. Chromates in the coating further enhance passivation. Full-threaded designs ensure consistent engagement across the entire bolt length, reducing stress concentrations. The absence of electroplating allows for higher tensile strength retention compared to galvanized alternatives. Coating thickness typically ranges from 5 to 12 microns, tested via cross-section microscopy or magnetic methods per ISO 1461.
Key Features
Dacromet-coated bolts offer 500–1,000 hours of neutral salt spray resistance (ASTM B117), outperforming conventional zinc coatings. The non-electrolytic process avoids hydrogen embrittlement, critical for high-strength bolts (Grade 8.8 or above). Their matte gray finish provides UV stability and minimal friction coefficient variation. Unlike mechanical plating, Dacromet coatings penetrate recessed areas uniformly, ensuring complete coverage even on complex geometries. The coating is also RoHS-compliant, with hexavalent chromium levels below 0.1% in modern formulations. Temperature resistance spans -60°C to 300°C, suitable for engine components and exhaust systems.
Application Areas
Primary industries include automotive (chassis, brake systems), renewable energy (wind turbine assemblies), and construction (bridges, transmission towers). Marine applications leverage their saltwater resistance for shipbuilding and dock hardware. Electrical infrastructure uses these bolts for grounding connections due to their stable conductivity. In agriculture, they secure equipment exposed to fertilizers and pesticides. OEMs often specify Dacromet bolts for outdoor machinery like cranes and railway fasteners, where maintenance access is limited.
Maintenance and Precautions
Dacromet bolts require no special maintenance but should be inspected periodically for mechanical damage to the coating. Avoid abrasive cleaning methods; instead, use mild detergents. Re-torquing after initial settling is recommended, as the coating may compress slightly under load. Storage should be in dry conditions to prevent condensation. While compatible with most metals, avoid direct contact with copper or brass to prevent bimetallic corrosion. For disassembly, use tools with soft jaws to prevent coating flaking. Never weld coated bolts—the heat destroys the corrosion protection.
B2B Procurement Guide
Specify bolt dimensions (e.g., M6–M24), thread pitch, and strength grade (e.g., 8.8, 10.9). Confirm compliance with standards like ISO 10683 or ASTM F1137. For large orders, request batch test reports for coating adhesion (ISO 4525) and salt spray performance. Lead times vary by coating thickness; 8μm is standard for general use, while 12μm suits extreme environments. Consider bundled procurement with matching Dacromet nuts and washers. MOQs typically start at 1,000 units, with bulk discounts available. Reputable suppliers provide material certifications (e.g., RoHS, REACH) and custom packaging (vacu-sealed bags for humidity control).
Related Manufacturers
- 主营：高强度螺栓达克罗、外六角螺钉
- 主营：螺母、螺钉、垫圈、螺栓、铆钉、组合螺丝、自攻螺丝、钻尾螺丝、紧定螺丝、销轴、膨胀螺丝、螺柱、牙条、挡圈、机械零件、索具、螺丝钉、弹簧、车床加工
- 主营：全螺纹螺柱、高强度螺母、加厚螺母、双头螺栓、高强度螺栓、地脚螺栓、六角螺栓、钢结构螺栓、异形螺栓、U型螺栓、热镀锌螺栓、膨胀螺栓、化工螺母、高强度平垫、高强度弹垫、热镀锌螺母、钻尾丝、防松螺母、建筑配件、止水螺杆
- 主营：铝合金铆钉、六角螺母、方螺母、六角螺栓、四方螺栓、活节螺栓、圆柱头螺丝、内六角螺丝、十字自攻、沉头螺丝、圆头螺钉、平垫、弹垫、梅花螺钉、非标螺丝、紧定、自攻螺丝、T型螺丝、圆柱销、铆螺母、钻尾螺丝、挡圈、牙条、牙棒
- 主营：三组合螺钉、不锈钢螺丝、304 螺丝、六角螺栓、六角螺母、平垫、弹垫、十字沉头、内六角螺丝
- 主营：双头弧、隧道螺丝、高铁螺丝、弧形管片螺栓、专用轨道螺栓、地铁轨道螺栓、地铁管片螺栓、镀锌高铁管片、连接管片螺丝
- 主营：螺栓、紧固件、螺母
- 主营：斜垫圈、圆柱销、紧固件、车螺栓、全牙螺栓、吊环螺栓、盘头螺栓、半牙螺栓、管堵头、平垫圈、止付螺丝、法式垫圈、自攻螺钉、钢丝螺套、加厚垫片、止推垫片、双头螺柱、六角螺钉、弹性挡圈、法标垫圈、压注油杯、蝶形螺母、中号垫片、四方薄螺、沉头铆钉
- 主营：组合螺丝、三角牙螺丝、铆钉、螺栓304、六角螺栓、螺栓定制、双头螺栓、马车螺栓、车件、内六角、六角螺母、自攻螺钉、蝶形垫圈、法兰螺母、开槽螺钉、手拧螺丝、宏炎盖母、六角双通、弹性挡圈、螺钉定做、十字法兰、304不锈钢、槽防脱螺钉、紧定、垫圈定做
- 主营：鹅蛋螺栓、异型螺丝、外六角螺母、钻尾自攻丝
- 主营：内六角、内梅花、外六角、膨胀螺栓、圆柱头、挡圈、铆钉、销钉、自攻螺丝、螺母、垫圈、弹垫、牙条、组合螺丝、木螺丝、钻尾螺丝、丝杆、平垫、紧定、开口销、牙棒
- 主营：钢结构、内六角、热镀锌、单头螺栓、化工螺栓、地铁螺栓、螺栓圆头、大螺母、外六角、紧螺帽、m36地脚、m20地脚、12.9地脚、板式地脚、镀锌地脚、自锁螺帽、六角螺母、锚板地脚、细牙螺母、化学锚栓、细扣螺母、法兰螺母、粗牙螺母、预埋地脚、螺丝红达
- 主营：六角螺母、高强螺帽、六角螺帽、全牙螺栓、六角螺栓、法兰螺栓、双头螺栓、镀锌螺栓、六角头螺栓、法兰面螺栓、高强度螺栓、镀彩锌螺栓、加厚螺帽、法兰螺母、法兰螺帽、镀锌螺帽、细扣螺母、高强度螺母、全螺纹螺丝、六角薄螺母、外六角螺丝、六角头螺母、热镀锌螺母、黑色六角螺、全螺纹螺柱
- 主营：热镀锌螺栓、10.9级钢结构螺栓、镀锌螺母、高强度螺丝、不锈钢螺丝