Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Crude Methyl Ester

Updated: 2026-08-03

Overview

Methyl ester, often referred to as fatty acid methyl ester (FAME), is produced through the esterification of fats or oils with methanol. It serves as a versatile chemical intermediate and is notably used in biodiesel production due to its renewable and biodegradable properties. The compound is derived from various feedstocks, including vegetable oils, animal fats, and recycled cooking oils, making it an environmentally friendly alternative to petroleum-based products. The quality and properties of methyl ester depend on the source material and production process. High-purity grades are essential for applications like biofuels, while industrial grades are used in lubricants and surfactants. Its low toxicity and biodegradability further enhance its appeal in sustainable industries.

Physical and Chemical Properties

醋酸丁酯 乙酸丁酯 乙酸正丁酯 99%含量国标溶剂济南正康化工有限公司

Methyl ester typically appears as a light yellow to colorless liquid with a mild, fatty odor. Its density ranges between 0.86 and 0.90 g/cm³, and it is insoluble in water but miscible with most organic solvents. The melting and boiling points vary significantly based on the fatty acid chain length and saturation degree of the feedstock. Key chemical properties include high oxidative stability and excellent lubricity, which make it suitable for use in bio-lubricants and metalworking fluids. Its low viscosity index and thermal stability are also advantageous in industrial applications. However, it may degrade over time if exposed to moisture or high temperatures, necessitating proper storage conditions.

商家经验真实案例 · 安全可信
卸妆油主要成分
本文解析卸妆油的核心成分构成,包括基底油、乳化剂和辅助成分的作用原理,并探讨不同肤质选择成分的注意事项,帮助读者科学认识卸妆油配方设计。

Main Applications

The primary use of methyl ester is in the production of biodiesel, where it serves as a renewable fuel additive that reduces greenhouse gas emissions. It meets international standards such as ASTM D6751 and EN 14214 for biodiesel blends. Beyond biofuels, methyl ester is utilized as a base for biodegradable lubricants, offering superior performance in hydraulic fluids and gear oils. In the chemical industry, it acts as a precursor for surfactants, emulsifiers, and plasticizers. Its solvent properties are exploited in cleaning agents and paint strippers. Additionally, methyl ester is employed in the food and pharmaceutical industries as a carrier for flavors and fragrances due to its non-toxic nature.

Safety and Storage

邻苯二甲酸二异壬酯 DINP 国标工业级塑料增塑剂山东创利新材料有限公司

Methyl ester is classified as non-hazardous, with low acute toxicity. However, prolonged skin contact may cause mild irritation, necessitating the use of protective gloves and goggles during handling. Inhalation of vapors is generally safe but should be avoided in poorly ventilated areas. Storage recommendations include keeping the product in sealed containers away from direct sunlight and oxidizing agents. Ideal storage temperatures range between 10°C and 30°C to prevent degradation. Bulk storage tanks should be equipped with nitrogen blanketing to minimize oxidation and moisture absorption, which can compromise product quality.

商家经验真实案例 · 安全可信
d60溶剂油是危化品吗
本文解析d60溶剂油的危险特性,从闪点、成分到运输储存注意事项,帮助工业用户准确判断其危化品属性,并提供安全使用建议。

B2B Procurement Guide

When procuring methyl ester, B2B buyers should prioritize suppliers who provide certificates of analysis (CoA) detailing purity, moisture content, and acid value. Feedstock origin (e.g., soybean, palm, or used cooking oil) impacts sustainability credentials and pricing. Buyers should also verify compliance with regional regulations, such as REACH or EPA guidelines, depending on the application. For bulk purchases, negotiate contracts that include quality assurance clauses and delivery schedules. Pricing varies based on feedstock volatility and market demand, with approximate ranges of $800-$1,200 per ton. Consider long-term partnerships with suppliers who offer consistent quality and transparency in sourcing practices.

Related Manufacturers