Overview
Copper metal extractants are specialized organic compounds designed to selectively bind and transport copper ions from aqueous solutions in hydrometallurgical processes. These reagents revolutionized copper production by enabling cost-effective recovery from low-grade ores (0.3-2% Cu) through solvent extraction-electrowinning (SX-EW) systems. Modern extractants typically belong to the hydroxyoxime family (e.g., LIX, Acorga series) or phosphoric acid derivatives, offering >95% copper recovery rates. The global market for copper extractants is driven by rising demand for sustainable copper production, with major suppliers including BASF, Solvay, and Kemira. These formulations often contain modifiers (e.g., nonylphenol) to enhance kinetics and suppress impurities like iron. Their development reflects decades of research to optimize loading capacity, selectivity, and environmental compatibility.
Physical and Chemical Properties
Commercial copper extractants are typically supplied as pre-mixed solutions containing 10-40% active ingredient in a kerosene-based diluent. Hydroxyoximes exhibit pH-dependent extraction, functioning optimally at pH 1.5-2.5, where they form stable 2:1 (ligand:Cu) complexes. Their extraction efficiency follows the order Cu²⁺ >> Fe³⁺ > Ni²⁺ > Zn²⁺, with separation factors >1,000 for Cu/Fe in optimized systems. Key performance metrics include extraction kinetics (typically <5 minutes for equilibrium), maximum loading capacity (5-8 g/L Cu in organic phase), and minimal crud formation. Thermal stability up to 40-50°C is critical for tropical operations. Modern formulations demonstrate <5% annual degradation when properly maintained, with some products offering enhanced resistance to MnO₂ and chloride interference.
Main Applications
Primary use occurs in copper SX-EW plants, where extractants separate copper from pregnant leach solution (PLS) containing 1-6 g/L Cu²⁺. A typical circuit involves extraction (Cu transfer to organic phase), scrubbing (impurity removal), stripping (Cu transfer to electrolyte), and electrowinning to produce 99.99% pure cathodes. This process consumes 0.2-0.5 kg extractant per ton of copper produced. Secondary applications include recycling of e-waste (PCB leaching solutions), treatment of acid mine drainage, and purification of copper alloys. Emerging uses involve urban mining from industrial wastewater, where modified extractants recover copper at concentrations as low as 50 ppm. Some formulations are adapted for heap leaching operations to improve copper recovery from chalcopyrite ores.
Safety and Storage
Copper extractants require careful handling due to flammability (flash points 60-80°C) and potential skin/eye irritation. Facilities should implement grounded storage tanks, explosion-proof equipment, and secondary containment to prevent spills. Bulk storage recommendations include temperature-controlled environments (<30°C) with nitrogen blanketing to minimize oxidation. Workers must wear nitrile gloves, goggles, and respirators when handling concentrated formulations. Spill response kits should contain absorbent materials (vermiculite, sand) and non-combustible containment booms. Environmental precautions include preventing runoff into water systems, as extractants may exhibit aquatic toxicity (LC50 ~10-100 mg/L for fish). Proper disposal involves incineration or regeneration through activated clay treatment.
B2B Procurement Guide
When sourcing copper extractants, buyers should evaluate: 1) Extraction efficiency at plant-specific PLS composition (test with actual feed samples), 2) Phase separation characteristics (aim for <2 minutes), 3) Tolerance to suspended solids and crud-forming elements (SiO₂, organics), and 4) Supplier technical support for circuit optimization. Major manufacturers provide customized formulations for specific ore types – for example, high-iron ores may require modified Acorga M5640, while chloride-rich systems perform better with LIX 984N. Procurement contracts often include performance guarantees (e.g., ≥95% Cu recovery) and volume discounts for annual purchases exceeding 50 tons. Logistics considerations include UN 1993 classification for transport and ISO tanker deliveries for large-scale operations.
Related Manufacturers
- 主营：[]
- 主营：阻燃剂、拉那白、牛儿酮、铜萃取剂N910、海藻糖、热敏蓝、萘磺酸、氯菊酯、硫酸锌、催化剂、杨梅酯、檀香醚、聚醚胺、吸收剂、脂檀油、苍术素、羟钴胺、转移剂、溶剂绿、麝香酮、王浆酸、芬多精、纤维素、新戊酯、王冠醚、遮甜粉
- 主营：5-三甲基己醛、正癸酸、樊多B醛、910铜萃取剂、聚乙二醇甲醚甲基丙烯酸酯、山梨醇缩水甘油醚、聚苯胺、磷脂酸铵盐、谷胱甘肽、二氧化钒、三羟甲基氨基甲烷盐酸盐、3二羟基萘、二苯酮、庚酰氯、菲尼酮、茶香醇、苹果酸、菠萝醚
- 主营：全氟三丁胺、氢化镁、碳纳米管导电浆料、萃取剂、羟基磷灰石、311-89-7、提取物、树脂、硅烷
- 主营：十八硫醇、碳酸铯、猪胆酸钠、脱氧胆酸钠、石胆酸、钛酸酯偶联剂、乙烯硫脲、单磷酸钠、玫瑰草油、乙酰化透明质酸钠、吗啉丙磺酸、亚甲基双丙烯酰胺、氧化锌、二甲基吡啶、聚醋酸乙烯酯、对碘苯甲酸甲酯
- 主营：增塑剂、二甲基亚砜、顺酐、N902铜萃取剂、环丁砜、二甲基二硫醚、赋臭剂、四氢噻吩加臭剂、环戊烷、塑化剂、二辛酯、石油醚、异丁醇、氯化苄、叔十二硫醇、硬脂酸钙、树脂涂料、四氢噻吩、化学试剂、国标染料、氯乙酸、硬脂酸锌、乙二醛、异辛烷、橡胶塑料
- 主营：渗透剂、催干剂、洗涤剂、金属切削液、防润滑油、棕榈油酸、工业润滑剂、矿石浮选剂、石油磺酸钠、石油磺酸钡、表面活性剂、润滑防锈剂、工业级妥尔油、单油酸酯聚氧乙、环氧树脂固化剂
- 主营：阻燃剂、冰醋酸、蒸馏水、有机金属脱出、清洗剂、碳酸氢铵、cod去除剂、车用尿素、aes洗涤剂、腐殖酸钠、氢氧化镁、氨基酸原粉、防锈润滑剂、工业级草酸、速溶硅酸钠、食品添加剂、工业葡萄糖、氨氮去除剂、工业级醋酸钠、聚氨酯黑白料、生化黄腐酸钾
- 主营：抗氧剂BHT、苯磺酸、苯酚磺酸、N235 萃取剂、C272萃取剂、环烷酸铈、均苯四甲酸二酐、对苯乙烯磺酸钠、氟化铝、椰油酰胺丙基甜菜碱、甘油三苯甲酸酯
- 主营：二甲苯、螯合铁、酵母浸粉、脂肪类萃取剂、酵母浸膏、四氯乙烯、对苯二胺、蛋白胨、EDDHA-Fe6、多聚甲醛、甘油甲缩醛、黄血盐钠、黄血盐钾、三醋酸甘油酯、硼酸、乙氧基喹啉、亚磷酸、乙醇、硝酸异辛酯、十六烷值改进剂、270号溶剂油、乙酸乙酯、航空煤油、硫化锰、油酸酰胺、蛋氨酸
- 主营：四氢噻吩、乙硫醇、单氰胺、二甲基二硫醚、3-甲硫基丙醛、四氢吡咯、邻氯苯腈、噻吩、盐酸羟胺、硬脂酸锌、异丙胺、氯乙酸、氟硼酸
- 主营：萃取剂、化工中间体、生物缓冲剂、实验试剂助剂
- 主营：喷雾干燥机、分子蒸馏仪、薄膜蒸发器、重金属固相萃取仪、精馏装置/精馏塔、索氏提取器/脂肪测定、细胞计数器、氮吹仪、多功能蒸馏仪、固相萃取仪、液液萃取仪、微生物限度仪、集菌仪、石墨消解仪、微波消解仪、cod消解仪
- 主营：紫外线吸收剂、光稳定剂、光引发剂、抗氧化剂、荧光增白剂、磺酸盐生物
- 主营：甲基丙烯酸十二酯、甲基丙烯酸十六酯、甲基丙烯酸十八酯、金属萃取剂、丙烯酸十二酯、丙烯酸十六酯、丙烯酸十八酯、V50引发剂、偶氮二异丁咪唑啉盐酸盐、N-乙酰己内酰胺、硅烷偶联剂、双马来酰亚胺、马来酸酯、缩水甘油酯、缩水甘油醚、甲基咪唑、N-异丙基丙烯酰胺
- 主营：十六烷基三甲基溴化铵、十二烷基甜菜咸、乳化剂、N910铜萃取剂、亚磷酸三丁酯、棕榈油、钛酸四丁酯、钛酸四乙酯
- 主营：阻燃剂、催化剂、水杨酸、二苯基、酰亚胺、正磷酸、烟酰胺、曲酸粉、氯化锌、异丙醇、化妆品、初油酸、脂肪醇、生石灰、甲基异、碳酸锌、碳酸锂、活性炭、乙二胺、三氮唑、着色剂、环己酮、防冻液、抗氧剂、亚磷酸
- 主营：花生酸、碳酸钠、单氟磷酸钠、丁基羟基茴香醚、鱼大豆酵母原料
- 主营：甲酸镍、水苏糖、阻燃剂、柠檬醛、西瓜酮、氢醌酯、卡必醇、消泡剂、磷酸铁、肉桂醇、肉桂醛、碳酸镉、磷酸铝、银墨水、椰油胺、封装胶、化合物、桦木油、稀释剂、羟乙基、乙硫氮、润肤剂、球虫酯、矮壮素、异龙脑