Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Copper Core Shielded Cable

Updated: 2026-07-25

Overview

Copper core shielded cable is a critical component in modern electrical and electronic systems, designed to transmit signals with minimal interference. Its construction typically includes a high-purity copper conductor, insulation layers (such as PVC or PE), and one or more shielding layers (aluminum foil or braided mesh) to block electromagnetic interference. This cable is widely adopted in industries where signal integrity is paramount, including factory automation, medical imaging, and telecommunications. The cable's design balances flexibility and durability, making it suitable for both fixed installations and dynamic applications where frequent movement is required. Its shielding effectiveness is measured in decibels (dB), with higher values indicating better EMI protection. Compliance with international standards (e.g., IEC, UL) ensures reliability across diverse operating conditions.

Structure and Working Principle

皖杰YGCB-4*35硅橡胶护套行车扁电缆红色2000米定制款安徽杰浩电气有限公司

The cable's core consists of stranded or solid copper wires, chosen for their excellent conductivity and mechanical strength. Surrounding the conductor, an insulating layer prevents current leakage and short circuits. The shielding layer, applied over the insulation, acts as a barrier against external electromagnetic fields and reduces signal crosstalk between adjacent cables. A protective outer jacket (often PVC) provides additional resistance to abrasion, chemicals, and moisture. Shielding works by creating a conductive enclosure around the signal-carrying conductor, which either reflects or absorbs interfering electromagnetic waves. In braided shields, tightly woven metal strands offer flexibility and coverage, while foil shields provide full 360° protection but may be less durable under repeated bending. Some high-end cables combine both shielding types for optimal performance.

商家经验真实案例 · 安全可信
挖断光缆赔偿标准
本文解析挖断光缆后的赔偿计算方式,包括运营商索赔依据、实际损失评估和协商处理流程,帮助施工方了解潜在责任风险。

Key Features

The primary advantage of copper core shielded cable lies in its ability to maintain signal clarity in electrically noisy environments. Its shielding effectiveness typically ranges from 60 dB to 100 dB, depending on the construction. The copper conductor ensures low resistance (often <0.1 Ω/100m) and high-frequency signal fidelity, making it ideal for analog and digital applications. Additional features include flame-retardant insulation (meeting UL 1666 or IEC 60332 standards), UV resistance for outdoor use, and oil-resistant jackets for industrial settings. Temperature tolerance varies by material but generally spans -40°C to +90°C. The cable's bend radius—typically 6-8 times the outer diameter—ensures ease of installation without compromising performance.

Application Areas

Industrial automation systems extensively use shielded cables for sensors, actuators, and PLC connections, where EMI from motors and variable frequency drives can disrupt signals. In medical settings, they ensure noise-free data transmission in MRI machines, patient monitors, and surgical equipment. Telecommunications infrastructure relies on them for base station antenna feeds and data center interconnects. Other applications include railway signaling (meeting EN 50264 standards), renewable energy systems (solar/wind farm monitoring), and aerospace avionics. The oil and gas industry employs specially armored versions for harsh offshore and drilling environments. Consumer electronics, such as high-end audio systems, also benefit from shielded cables to preserve signal quality.

Maintenance and Precautions

启道电子LMR240 CNT-240 50-4低损耗电缆 服务周到;一站采购苏州启道电子科技有限公司

Regular inspection of shielded cables is essential to detect wear, corrosion, or shield damage, which can degrade performance. Grounding the shield at one end (usually the source) prevents ground loops while maintaining EMI protection. Avoid running shielded cables parallel to high-voltage power lines; cross them at 90° angles if unavoidable. During installation, use proper strain relief and avoid stretching the cable beyond its tensile rating. For flexible applications (e.g., robotics), select cables rated for high flex cycles. Storage should be in dry conditions, away from direct sunlight, and on reels to prevent kinking. Testing with a megohmmeter or time-domain reflectometer (TDR) can verify insulation integrity and shield continuity.

商家经验真实案例 · 安全可信
光缆里面是光吗
本文揭秘光缆内部构造与工作原理,解释光信号如何通过光纤传输,并澄清光缆中并非时刻存在可见光,而是通过激光或LED脉冲实现数据传递。

B2B Procurement Guide

When sourcing copper core shielded cables, specify conductor size (AWG or mm²), shielding type (single/double, foil/braid), and insulation material based on environmental needs. Request compliance certificates (RoHS, REACH, UL) and test reports for shielding effectiveness. Bulk purchases (500+ meters) often reduce costs by 15-30%, but confirm minimum order quantities (MOQs) with suppliers. Leading manufacturers include Belden, Lapp Group, and Prysmian. Compare lead times (typically 2-6 weeks for custom orders) and negotiate warranty terms (commonly 1-5 years). For specialized applications (e.g., plenum-rated or halogen-free cables), collaborate with suppliers early in the design phase. Sample testing is recommended to validate performance before large-scale procurement.

Related Manufacturers