Copolymeric High Temperature Nylon
Overview
High-temperature copolyamide nylon is an advanced engineering plastic developed through copolymerization technology to enhance thermal stability beyond standard nylons. This material bridges the gap between conventional polyamides and more expensive high-performance polymers, offering an optimal balance of properties and cost-effectiveness. The copolymer structure allows for tailored properties to meet specific application requirements. Manufacturers can adjust the monomer ratios to achieve desired characteristics such as higher continuous use temperatures (up to 180°C), improved chemical resistance, or enhanced dimensional stability.
Physical and Chemical Properties
This specialty nylon exhibits outstanding heat deflection temperatures (HDT) ranging from 150°C to 180°C at 1.82 MPa, significantly higher than standard PA6 or PA66. The material maintains excellent mechanical properties at elevated temperatures, with tensile strength typically between 70-85 MPa and flexural modulus of 2,300-3,000 MPa. Chemical resistance is another notable feature, with good performance against automotive fluids, weak acids, and alkalis. The low moisture absorption rate (approximately 2.5% at saturation) contributes to superior dimensional stability compared to conventional nylons, making it suitable for precision components.
Main Applications
In the automotive sector, high-temperature copolyamide nylon is extensively used for under-the-hood components such as turbocharger air ducts, charge air cooler end caps, and engine management system housings. These applications benefit from the material's ability to withstand long-term heat exposure and aggressive chemical environments. The electronics industry utilizes this material for connectors, sockets, and circuit breakers where high temperature resistance and good electrical insulation properties are required. Industrial applications include gears, bearings, and pump components that demand both mechanical strength and thermal stability.
Safety and Storage
While generally safe in solid form, processing high-temperature copolyamide nylon requires precautions due to the high melting temperatures involved. Adequate ventilation should be maintained during injection molding or extrusion to prevent inhalation of potential decomposition products. Proper storage is essential to maintain material quality. The pellets should be kept in moisture-proof packaging until use and stored in conditions below 30°C with relative humidity under 50%. For critical applications, drying before processing (typically 4-6 hours at 80-100°C) is recommended to prevent surface defects in molded parts.
B2B Procurement Guide
When sourcing high-temperature copolyamide nylon, buyers should clearly specify their technical requirements including minimum heat deflection temperature, mechanical property targets, and any necessary certifications (e.g., UL, FDA, or automotive standards). Technical datasheets from suppliers should be carefully reviewed for test methods and conditions as properties can vary significantly depending on testing standards. For large-volume procurement, consider requesting material samples for your own testing before committing to bulk orders. Evaluate suppliers based on their technical support capabilities, consistency in material quality, and ability to provide customized formulations if needed. For reference, bulk prices typically range between $8-15 per kilogram depending on grade and order quantity.
Related Manufacturers
- 主营：电气用具、电线电缆、模压塑料、管道系统、热熔胶粉、衬里管件、耐热阻燃剂、挤出成型品、模压挤出成型、阻燃高纯度铁氟
- 主营：微蜡粉、塑胶粉末、热熔胶粉、一元尼龙粉、涤纶抗菌剂、涤纶树脂粉、溶剂耐水解、微球pet细粉、耐温球形树脂粉
- 主营：产品袋、半晶体、耐热管、共聚物、热熔胶、包装膜、耐燃油、洗衣机、增粘剂、垃圾袋、缠绕膜、聚丙烯、奶瓶料、工业袋、玻璃珠、电视机、密封剂、机顶盒、连接器、增强剂、显示器、眼镜片、粘合剂、阻燃pei、密封件
- 主营：均聚物、沙伯基、齿轮料、尼龙料、紧固件、聚甲醛、子电气、高耐磨、PC、POM、PA66、POE、ABS、PCTG、PETG、PA12
- 主营：眼镜架、阻燃剂、热熔胶、一元尼龙粉、保险扛、手机料、内涂层、安全帽、电脑锣、玻璃珠、6700h-250、哈啦粉、密封圈、车部件、冷冻管、聚酰胺、仪表盘、照明灯、化妆品、购物袋、lcp橡胶、专用料、瓶盖料、透明料、玻纤增、背心袋
- 主营：云天化pom、美国杜邦pom、日本宝理pom、日本旭化成pom、德国巴斯夫tpu、科思创tpu、奇美abs、德国朗盛pa66、美国首诺pom、泰科纳pom、韩国可隆pom、韩国工程pom、韩国乐天pc、日本三菱pom、PPO、沙伯基础pc/abs、法国阿科玛pvdf、PPA、云天化POM m90、美国陶氏poe、埃克森美孚poe、云天化聚甲醛、pom云天化m90、LCP、PTFE
- 主营：改性塑料、塑胶原料、改性ABS、改性PC/ABS、PC、POM、改性PA6、改性PA66、PPO、阻燃合金、阻燃ABS、PC/ABS、PP、PA全系、改性PET、改性PC、ABS、PA6、PA66、PBT、HDPE、LDPE、PPS、PMMA、GPPS
- 主营：共聚尼龙、聚乙烯塑胶原料
- 主营：气元件、电池盒、聚合物、共聚物、尼龙、聚丙烯、波形板、聚烯烃、成核剂、密封圈、连接器、成型周、均聚物、绝缘件、挤出tpu、密封件、电气性、改性料、PPS、POM
- 主营：PP、PE、ABS、POM、PC、POE、EVA、德国朗盛、美国杜邦、日本宝理pom、韩国LG、奇美abs、pom900p、工程塑料、PPO、TPU、PET
- 主营：架桥剂、YW100 锂萃取剂、端羧基液体丁腈橡胶、共聚尼龙、10-羟基癸酸、苯乙烯磷酸、肉豆蔻酸镁、硬脂酸钴、全氟三丁胺、乙烯基磷酸二乙酯、磷酸锰铁锂、β-磷酸三钙、十一烯酸、钨酸铝、1-乙炔基环已醇、间二异丙苯、锂硅合金、溴甲酚绿、生物活性玻璃、溴代海因树脂颗粒、红铝、龙涎酮、原丁酸三甲酯
- 主营：PP、POM、pc、PA66、POE、ABS、PPS、PBT、PA6
- 主营：EVA、PP、PC、共聚尼龙、PA6、PA66、POM聚甲醛、ABS、PPS、PE、PETG、PMMA、PBT
- 主营：POM、PVDF、PA66、共聚甲醛赛钢、PPS、PBT、Pom500p、Pom100p、Pom900p、F20-03、M90-44、Ppsu、PPA、POE、PA9T、日本旭化成pom、日本宝理pom、德国巴斯夫pa66、美国杜邦pom、PCTG、PC材料、PC ABS材料、ABS、PA6材料
- 主营：塑料颗粒、PA6、POM、PC/ABS、日本宝理pps、PBT、Pom100p、Pom500p、Pom900p、M90-44、F20-03、ABS747、abs757、美国杜邦、德国巴斯夫、日本宝理pom、ASA、PMMA、PEEK、PCTG、PPA、PPSU、PVDF、POE、乐天PC-1100
- 主营：固体酸催化剂、重组胶原蛋白、硅油、共聚尼龙、特种硅油、聚硅氮烷、硼酸铝晶须、碳化硅晶须、t-BAMBP萃取剂、全氟三丁胺
- 主营：Pom美国杜邦、日本宝理pom、旭化成pom、Pom100p、Pom500p、Pom900p、M90-44、F20-03、ABS747、abs757、LCP、PA6T、PA9T、POE、PBT、PVDF、PETG、COC、HIPS、TPEE、TPU、TPV、日本旭化成pom、美国杜邦pom
- 主营：电器外壳、小部件塑料、灰色电路板、共聚甲醛材料、尼龙塑胶材料、聚丙烯颗粒、齿轮注塑材料
- 主营：车配件、电池壳、家电配件、尼龙材料、注塑尼龙料、注塑材料、电器外壳、机械器材、改性塑料、健身器材、电子配件、汽车部件、包装容器、灰色电路板、小部件塑料、开关连接器、电动工具配、聚丙烯颗粒、耐磨齿轮料、吸尘器外壳、聚丙烯塑料、聚酰胺树脂、耐磨机械外壳、鞋材手机外壳、耐热手机外壳