Connector Skeleton Special Material
Overview
Connector frame special material is a high-performance polymer compound engineered specifically for manufacturing the structural frames of electrical connectors. These materials are formulated to meet the demanding requirements of modern connector designs, which must withstand mechanical stress, high temperatures, and environmental factors while maintaining reliable electrical insulation. Developed as a response to the increasing miniaturization and performance demands in electronics, these materials often incorporate reinforced polymers such as PBT (polybutylene terephthalate), PA (polyamide), or PPS (polyphenylene sulfide) with additives for enhanced properties. The selection of base polymer and additives determines the final material characteristics, making it crucial for manufacturers to specify their exact performance needs.
Physical and Chemical Properties
Connector frame materials exhibit a unique combination of properties that make them suitable for their intended applications. Typical mechanical properties include high tensile strength (50-100 MPa) and impact resistance, ensuring durability during connector assembly and use. The materials maintain dimensional stability across a wide temperature range (-40°C to +120°C for standard grades). From a chemical perspective, these materials demonstrate excellent resistance to oils, fuels, and common industrial chemicals, which is particularly important for automotive applications. The electrical properties are equally critical, with volume resistivity typically exceeding 10^15 Ω·cm and dielectric strength of 15-20 kV/mm. Flame retardancy is another key feature, with many formulations achieving UL94 V-0 rating without compromising other properties.
Main Applications
The primary application of connector frame special material is in the production of housings for various types of electrical connectors. In automotive applications, these materials are used in sealed connectors for engine compartments, where they must withstand vibration, temperature extremes, and exposure to fluids. Industrial applications include heavy-duty connectors for machinery and control systems that require high reliability. The consumer electronics sector utilizes these materials in miniaturized connectors for smartphones, tablets, and other portable devices, where thin-wall molding capability and precise dimensional stability are essential. Emerging applications include connectors for renewable energy systems, particularly in solar panel installations and wind turbines, where materials must endure long-term outdoor exposure.
Safety and Storage
While connector frame materials are generally safe to handle, proper precautions should be observed during processing and storage. The materials should be stored in their original packaging in a dry environment with controlled humidity (preferably below 50% RH) to prevent moisture absorption, which can affect processing and final product quality. During injection molding (the primary processing method), adequate ventilation should be maintained as some formulations may release minimal fumes at processing temperatures. Personal protective equipment including heat-resistant gloves and safety glasses is recommended when handling molten material. Processors should refer to the material safety data sheet (MSDS) for specific handling instructions for each formulation.
B2B Procurement Guide
When procuring connector frame special material, buyers should first clearly define their application requirements including temperature range, mechanical stress expectations, flame retardancy needs, and any chemical exposure concerns. Technical specifications should be compared across suppliers, with particular attention to UL certifications and RoHS compliance status. For large volume purchases, consider negotiating long-term supply agreements with price adjustments clauses to mitigate raw material cost fluctuations. Quality assurance is critical - request certificates of analysis for each batch and consider third-party testing for critical applications. Lead times can vary significantly (typically 4-8 weeks), so advanced planning is essential, especially for customized formulations. For reference, standard grades typically range from $3-8 per kg depending on specifications and order volume.
Related Manufacturers
- 主营：工程塑料、特种工程塑胶、热塑性弹性体
- 主营：TPEE弹性体、TPU聚氨酯、沙林树脂、TPE原料、PTFE聚四氟乙烯、PFA全氟乙烯、PVDF、PPA、PA12、PA46、PA9T、聚砜PSU、PPSU、PEEK、PEI、COC、ETFE、THV
- 主营：高温特种塑胶、通用塑胶、PA66、正牌料、工程材料、橡胶原料、POM、PFA、ETFE、PVDF、PBT、PC、ABS、PEEK、PTFE、FEP、PP、PC/ABS
- 主营：尼龙、POM、ABS、塑料颗粒、PA66、PA6、PC、PBT、EVA、HDPE、日本宝理、美国杜邦、日本东丽、德国巴斯夫、台湾奇美、台湾台塑
- 主营：PVDF、PTFE、PFA、特种工程塑料、合金塑料、SURLYN沙林、EVA、PA6、PA66、PC、PCTG、PEBA、ASA、PTB、PPO、LCP、PCTA、PETG、POM、EAA、热塑性弹性体、CAB、氟橡胶、硅橡胶、PMMA
- 主营：聚丙烯、TPU、EVA、通用料、PA66、PA6、POM、ABS、PC、PPO、POE、PEEK、PPE、PPS、PETG、AES、PA、TPV
- 主营：热塑弹性体、奇美ABS、杜邦尼龙、工程塑料、通用塑料、合金塑料、特种工程塑料、改性料、杜邦POM、韩国SK PP、李长荣PP、长春PBT、巴斯夫尼龙、巴斯夫PBT、奇美PC、科思创PC、沙伯基础PC、沙伯基础PC/ABS、中石化PP、中石化PE、韩国工程POM、科思创PC/ABS、LG化学PC/ABS、LG化学PC、沙伯基础PPO
- 主营：PVC稳定剂、pvc助剂、成核剂、改性塑料、EPP泡沫材料、pp 增刚增硬剂、pp增韧剂、PP增透剂
- 主营：POM均聚、POM共聚、杜邦100P、EVA塑料、POM塑料、ABS塑料、PC/ABS合金料、杜邦500P、尼龙PA6-PA66、PMMA亚克力、聚碳酸酯pc、科思创2805、透明尼龙12
- 主营：PEEK、PPSU、PSU、接插件、PES、PEI、PVDF
- 主营：30%玻璃、热尼龙66、聚酰胺66、工程塑料、增强塑料、增强材料、htn54g15hslr、高温尼龙、塑胶颗粒、尼龙玻纤、LCP、TPU、美国杜邦、日本宝理、德国拜耳、ST801、2805、PC、757、100P、陶氏POE、8480
- 主营：均聚物、沙伯基、紧固件、尼龙料、齿轮料、聚甲醛、子电气、高耐磨、PC、POM、PA66、POE、ABS、PCTG、PETG、PA12
- 主营：PA66尼龙、POM聚甲醛、TPU、接插件、PBT
- 主营：POE、ABS、PP、接插件连接器线圈骨架、PE、EVA
- 主营：PA12、POM、PC、接插件、PA66、PTFE、PFA、ETFE、PBT、TPEE、PA11、TPV、EVA、PPSU