Overview
Compressed oxygen is oxygen gas stored under high pressure in cylinders or tanks, typically at 2000-3000 psi. It is a critical resource in both industrial and medical fields, prized for its ability to support life and combustion. Produced through air separation processes like cryogenic distillation or pressure swing adsorption (PSA), compressed oxygen must meet strict purity standards, especially for medical applications where 99.5% purity is often required.
Physical and Chemical Properties
As a diatomic molecule (O₂), oxygen is paramagnetic and exhibits high reactivity, particularly with organic compounds. Its cryogenic liquid form boils at -183°C, while gaseous oxygen is 1.1 times heavier than air. Under compression, oxygen's density increases significantly, allowing efficient storage. However, this also raises safety concerns, as pressurized oxygen can violently react with hydrocarbons. The gas is odorless and tasteless, requiring specialized detectors for leak monitoring.
Main Applications
In healthcare, compressed oxygen is essential for respiratory therapies, anesthesia, and emergency medicine. Industrial uses dominate consumption, particularly in oxy-fuel welding/cutting where it reaches 3,000°C when combined with acetylene. The aerospace industry relies on oxygen systems for crew breathing and rocket oxidizers. Emerging applications include wastewater treatment (aeration) and glass manufacturing, where oxygen enrichment improves combustion efficiency by 20-30% compared to air.
Safety and Storage
Oxygen cylinders require careful handling due to explosion risks from pressure or chemical reactions. Storage areas must be fire-resistant, with temperatures kept below 52°C. Valve protection caps should always be secured during transport. Specialized cleaning (oxygen service) is mandatory for all equipment to remove hydrocarbon residues. OSHA regulations prohibit using petroleum-based lubricants, requiring instead PTFE-based alternatives approved for oxygen service.
B2B Procurement Guide
Industrial buyers should specify required purity (industrial grade 99.2% vs. medical grade 99.5%), delivery method (cylinders, bulk liquid, or on-site generation), and flow rate requirements. Cylinder sizes range from portable D-size (425L) to large H-size (7,000L). Consider total cost of ownership including cylinder rental fees, transportation, and vaporization costs for liquid oxygen. Reputable suppliers should provide Material Safety Data Sheets (MSDS) and DOT/TC certification documents for all containers.
Related Manufacturers
- 主营：氧气分气包、汇流排、空温式汽化器、电加热汽化器
- 主营：矿用防爆电气、排型钢梁、矿用门、压缩氧气自救、支护设备、铁路道岔、矿用检测仪报警仪传感器、矿用救护设备、矿用电子围栏、煤矿井下自动隔爆装置、蓄电池电机车、锚杆钻机、单体液压支柱、无压风门、回柱绞车、喷浆机、隔爆摄像仪、隔爆稳压电源、矿用本安型电磁阀、矿用气动工具
- 主营：振动夯、破切机、管片车、压缩供氧装置、捣固机、报警仪、风煤钻、风筒布、三用阀、减速机、电机车、除雪机、铁水包、振动器、磨轨机、凿毛机、道口板、充气胎、行走轮、封孔器、介质粉、测定仪、传感器、泥浆泵、岔机芯、校正仪
- 主营：矿用无压风门密闭门、拆缸机油缸拆装机、矿用防水密闭门避难硐室门、压缩氧气充气泵、全百叶窗无压风门、气相色谱仪、雾炮机、全自动顶空进样器、镀锌电缆挂钩、矿用防火栅栏门、钻孔应力计、T 型钢带W钢带、矿用卡绳器、内燃双头螺栓扳手、单体液压支柱拆柱机、电液推杆、斜井防跑车装置、矿用平板车、氢气发生器、阀柱实验台、电动卷扬机、燃气分析仪、空气发生器、机载临时支护装置、掘进机临时支护、拆缸机
- 主营：压缩机、空压机、呼吸器充气泵
- 主营：工业气体
- 主营：雷管箱、放炮线、气体间隔器、爆破线、炸药箱、炮被、防爆罐、炮泥机、水炮泥袋、矿用报警器、气体检测仪、爆破测振仪、避炮棚、抗爆容器、车载防爆罐
- 主营：除雪车、扫地机、挖藕机、稻香氧气填充泵、振动夯、捣固机、背包钻、划线机、插秧机、拉毛机、清扫机、风煤钻、破碎锤、修剪机、除雪机、上料机、切圆机、凿毛机、移植机、切管机、铲削机、抹灰机
- 主营：气体增压泵、气液增压泵、空气增压泵、氧气增压泵、压缩空气增压泵、气体增压系统、气液增压系统、气体加压泵、气动加压泵、氢气增压泵、气液加压泵、压力容器测试系统、工业流体、PLG气液增压系统、气体增压单元、冷媒增压泵、空气放大器、氮气增压泵、气动增压系统、水压测试系统、气密性测试系统、爆破测试系统、脉冲测试系统、瓶阀测试系统、水压试验台
- 主营：食品级二氧化碳、标准气、液二氧化碳、工业氧气、氧气、工业气体、干冰、干空气、乙炔、丙烷、氮气、氦气、六氟化硫、液氮、氨气
- 主营：带式给煤机、往复式给煤机、称重给煤机、氧气充填泵、UPS电源、洒水降尘装置、皮带机综保、液压挖掘机、司空道岔装置、气动隔膜泵、压风自救、粉尘传感器
- 主营：救援水泵、灭火水泵、防火水泵、自给式压缩氧气呼吸器、应急灭火泵、消防接力水泵、水冷四级离心泵、消防灭火离心泵
- 主营：矿用阻化泵、气动注液泵、氢氧化钙、氧气充填泵、氧气呼吸器、二氧化碳吸附剂、一氧化碳吸附剂、空气呼吸器、避难硐室门、空气呼吸器充气泵、防火栅栏门、防水密闭门、凿岩机、喷雾泵、风镐、乳化液泵、气动注浆泵、煤层高压注水泵、卧式三缸泥浆泵
- 主营：滚轮罐耳、气动阻车器、气动隔膜泵、氧气填充泵、液压挖掘机、甲带给料机、矿用UPS电源、空气炮、往复式给煤机、无压风门、风门电控装置、副井操车系统、气动卧闸、气动挡车梁、司控道岔装置、自动洒水降尘装置、自动隔爆装置、矿用隔爆摄像仪、煤矿清淤机、矿用挖掘式装载机、称重给煤机、皮带机综合保护装置、矿用电子围栏、防溃仓给煤机
- 主营：高纯氮气、高纯氩气、高纯氦气、高纯氧气、氧气表、深圳氧气出租、福田氧气配送、高纯乙炔、高纯二氧化碳、氨气、液氮、液态氩气、甲烷、丙烷、六氟化硫、混合气、激光气、氢气、乙炔表、深圳工业气体公司、深圳气体厂家