Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

Coke

Updated: 2026-07-15

Overview

Coke is a critical industrial material produced by heating coal in the absence of air (pyrolysis) to remove volatile compounds. This process yields a porous, carbon-rich solid with high structural strength and thermal stability. Metallurgical coke, the most common type, serves as both a fuel and chemical reductant in iron and steel production. The quality of coke depends on the coal blend and coking conditions. Premium grades contain over 90% fixed carbon with minimal ash and sulfur. Petroleum coke, an alternative variety from oil refining, has distinct properties and applications in aluminum and titanium production.

Physical and Chemical Properties

煤矿井下支护用树脂锚固剂生产厂 MSZ3535中速锚固材料山东尤尼科矿业科技有限公司

Coke's defining characteristic is its high fixed carbon content, typically 85–95%, which enables extreme temperature resistance. Its porous structure provides a large surface area for chemical reactions while maintaining compressive strength to support blast furnace charges. The material's low volatile matter (under 2%) prevents unwanted gas generation during metallurgical processes. Key metrics for industrial coke include the Coke Strength After Reaction (CSR) and Coke Reactivity Index (CRI), which predict performance in furnaces. Ash content (usually 8–12%) affects slag formation, while sulfur levels below 1% are preferred to prevent steel embrittlement.

商家经验真实案例 · 安全可信
石墨的诞生之谜
本文揭秘石墨的原料来源与形成过程,从碳元素的奇妙转化到天然与人工石墨的区别,带你了解这种工业黑金的诞生故事。

Main Applications

Over 90% of metallurgical coke feeds blast furnaces for pig iron production, where it generates heat (combustion) and acts as a reducing agent for iron ore. Foundries use specialty coke for cupola furnaces in casting operations. The chemical industry employs it to produce calcium carbide, a precursor to acetylene, and as a carburizing agent in steel treatment. Non-metallurgical applications include use in water filtration (activated coke), as a conductive material in electrodes, and in sugar refining. Lower-grade coke serves as fuel in brick kilns and power plants, though environmental regulations increasingly restrict this use.

Safety and Storage

橡胶颗粒跑道用1-3毫米黑色橡胶粉30目耐磨损沥青用灵寿县成江矿业加工厂

As a combustible material, coke requires careful handling to prevent dust explosions. Storage areas must have proper ventilation to disperse any accumulated gases. Workers should use NIOSH-approved N95 respirators when handling fine particles to prevent pneumoconiosis. Large-scale storage follows bulk material guidelines with wind barriers to minimize dust dispersion. Unlike coal, coke does not spontaneously combust but should still be kept away from open flames. Moisture control is critical – excess water reduces heating value and promotes dust clumping.

商家经验真实案例 · 安全可信
4.5万吨选矿药剂建设周期
本文解析年产4.5万吨高效选矿药剂项目的典型建设周期,从前期准备到试车投产分阶段拆解时间节点,并探讨影响工期的关键变量,为同类项目提供参考框架。

B2B Procurement Guide

Industrial buyers should specify: fixed carbon percentage (target ≥90%), ash content (≤10%), sulfur levels (≤0.8% for premium grades), and size distribution (10–100mm for blast furnaces). CSR above 60% indicates high stability in furnace environments. Consider transportation logistics – coke is bulky with low density, making rail or barge shipping cost-effective for large quantities. Quality verification through third-party lab testing is recommended, especially for international shipments. Long-term supply contracts with coking plants help stabilize pricing, as coke production correlates with steel industry cycles. Environmental compliance documentation should confirm low benzo(a)pyrene emissions if required.

Related Manufacturers