AicaigouB2B Wiki

Ceramic Liner Plate with Bolt Holes

Updated: 2026-07-15

Overview

Ceramic liner plates with bolt holes are engineered wear solutions combining alumina ceramic's extreme hardness with practical bolt-on installation. Unlike welded steel liners, these modular plates allow targeted replacement of worn sections without equipment downtime. The standard thickness ranges from 10-50mm, with hexagonal or square shapes sized for specific equipment like cyclone separators or transfer points. Developed in the 1990s as an alternative to chromium steel, modern versions incorporate shock-absorbing rubber backing layers (3-10mm thick) to withstand impact up to 5J/cm². Major manufacturers offer customized hole patterns matching international flange standards for seamless integration with existing infrastructure.

Structure and Working Principle

The three-layer construction typically includes: 1) a 92-99% alumina ceramic face (Mohs 9 hardness), 2) an intermediate adhesive layer, and 3) a carbon steel or rubber backing plate. Bolt holes are precision-drilled using diamond core bits to prevent microcracks, with countersunk designs accommodating DIN 912 bolts. During operation, the ceramic surface's low porosity (<0.5%) creates a smooth wear plane that reduces material buildup. When abrasive particles strike at angles <35°, the ceramic's compressive strength (≥850MPa) causes particles to fracture rather than erode the surface. Backing layers distribute impact energy across the entire plate area, preventing localized stress concentrations.

Key Features

Superior wear resistance (0.1-0.3mm/year loss in coal applications) outperforms NM400 steel by 5-10x. The bolt-hole design allows 50% faster installation than welded alternatives, with typical service life of 5-15 years depending on application severity. Advanced versions feature interlocking tongue-and-groove edges that eliminate gap erosion. Optional conductive ceramics (surface resistivity <10⁶Ω) are available for explosive environments. Temperature resistance ranges from -50°C to +500°C, making them suitable for hot material handling in cement kiln feed systems.

Application Areas

Primary installations include: 1) Power plant coal pulverizer cones (reducing maintenance from quarterly to biennial), 2) Iron ore processing chutes (handling 500t/h flows), and 3) Cement plant cyclone preheaters (withstanding 80m/s particle velocities). In mining, these liners protect trommel screens from +50mm rock abrasion. Food-grade ceramic variants with smooth surfaces (<0.8μm Ra) are used in grain elevators where metal contamination is prohibited. Recent offshore oil applications utilize them in sand separation vessels exposed to seawater corrosion.

Maintenance and Precautions

Inspect bolt torque (typically 45-60Nm) quarterly during the first year of service. Replace individual plates showing >30% wear depth or edge spalling. Never weld directly onto installed plates - use dedicated mounting brackets instead. For cleaning, high-pressure water (<150bar) is preferred over pneumatic tools that may cause edge damage. Store spare plates horizontally on wooden pallets to prevent warping. When handling, use nylon slings rather than metal hooks to avoid ceramic chipping at hole edges.

B2B Procurement Guide

Specify: 1) Ceramic Al₂O₃ content (92%/95%/99%), 2) Required impact resistance (J/cm²), 3) Backing material thickness, and 4) Bolt hole pattern (provide equipment drawings). Leading manufacturers include Chemshun (China), Kalenborn (Germany), and CeramTec (global). Bulk orders (100+m²) typically gain 15-20% volume discounts. Request certified test reports for wear rate (ASTM G65) and bond strength (>15MPa). For corrosive environments, verify acid resistance per ISO 28706-2. Lead times range from 4-8 weeks for standard sizes, longer for custom shapes.

Related Manufacturers