Overview
Ceramic capacitor materials are specialized dielectric compounds, primarily based on titanium, barium, or zirconium oxides, engineered to store and regulate electrical energy in capacitors. These materials revolutionized modern electronics by enabling miniaturization and high-frequency performance. Classified into three types (Class I-III), they balance stability, capacitance density, and temperature response. Class I (e.g., TiO2) offers precision, while Class III (e.g., BaTiO3 with dopants) provides high volumetric efficiency for compact multilayer ceramic capacitors (MLCCs).
Physical and Chemical Properties
These materials exhibit exceptional dielectric constants (εr=30-20,000), with low electrical conductivity (10^-12 S/m) and dissipation factors (tanδ <0.01). Their crystalline structure, often perovskite for Class II/III, enables polarization under electric fields. Thermal properties vary: Class I materials maintain stable capacitance (±30ppm/°C), whereas Class II/III show nonlinear temperature dependence. Mechanical strength ranges from 100-200 MPa after sintering, with typical grain sizes of 0.5-5µm in finished ceramics.
Main Applications
Over 80% of MLCCs (smartphones, IoT devices) use Class II X7R/X5R formulations. Class I (NP0/C0G) serves RF/microwave circuits and timing applications. Emerging 5G infrastructure demands ultra-low loss materials like modified MgTiO3. Automotive electrification drives demand for high-voltage (>1kV) formulations in EV power systems. Industrial applications include snubber circuits, where fast charge/discharge cycles require materials with high breakdown strength (>10kV/mm).
Safety and Storage
Raw powders require moisture-proof packaging (dew point <-40°C) to prevent hydration. Sintered ceramics are inert but generate respirable dust during machining - use local exhaust ventilation. Fire safety is minimal (non-combustible), but thermal shock during processing may cause cracking. Storage areas should maintain <30% relative humidity. Bulk powders may require explosion-proof equipment due to dust explosion risks (ST1 classification).
B2B Procurement Guide
Technical specifications should include: dielectric constant (±5% tolerance), loss tangent (max @1MHz), TCC curve (for Class II/III), and DC bias characteristics. For MLCC production, particle size distribution (D50 0.3-0.8µm) is critical. Supplier audits should verify: ISO 9001 certification, batch-to-batch consistency testing (Δεr <2%), and traceability of rare-earth dopants. MOQ typically starts at 50kg for standard formulations, with lead times of 4-8 weeks for custom compositions.
Related Manufacturers
- 主营：氧化铋、高纯碲块、金属铟锭、声光材料、液态金属、金属铟、金属锗、二氧化碲、真空镀膜、铋粉、碲化铋棒材、低熔点合金、碲粒、铟粒、铋珠铋粒、镓铟锡合金、锗粉、铟丝、铟片铟箔、三氧化二铋、碲化铋、铋靶材、铟珠铟粒、低熔点焊料、铋锭
- 主营：电容器、高铁酸钾
- 主营：电容器、精细化工品、润滑油、有机中间体
- 主营：防酶剂、表面活性剂、次氯酸钙、电容器、福美钠、蛋白胨、氟化氢钾、氟化钠、氟化钾、浮选油
- 主营：胰蛋白胨、骨蛋白胨、牛肉浸膏、电容器、福美钠、漂粉精、漂白精、次氯酸钙、单乙醇胺、三乙醇胺、三甘醇、防辐射钡粉、茶皂素、大苏打、小苏打、甘氨酸、九水硫化钠
- 主营：白炭黑、白僵菌、eva乳液、钛酸锶陶瓷电容器、棕榈蜡、pvc发泡剂、聚碳酸酯、聚乙烯蜡、苯甲酸铵、t-31固化剂
- 主营：封口蜡、水杨酸、正辛烷、钛酸锶陶瓷电容器、肉桂醇、珠光片、碳酸镁、肉桂醛、建筑料、磷酸铝、肉桂酸、戊二醛、切削液、叔丁醇、清洗剂、硫化钠、硫化钡、升硫醚、硫化钙、杀菌液、氯化锌、黄原胶、助染剂、椰子油、氯化锰、氧化锑
- 主营：福美钠、五氧化二钒、氨基磺酸、陶瓷电容器、氨基化锂、焦性没食子酸、次氯酸钙、漂粉精、酪蛋白胨、甘油、九水硫化钠、牛油脂肪酸、酵母膏、氟硅酸钠、单乙醇胺、氢氧化钾、氟化钠、氟化钙、氧化铅、油酸钠、偏钒酸铵、氢氧化钡、EVA乳液、二硫化钼、氟化氢钾
- 主营：甘氨酸、滑石粉、三甘醇、钛酸锶陶瓷电容器、生桐油、水杨酸、葡聚糖、石英砂、薄荷脑、苯甲醇、平平加、丁酸钠、磷酸氢、扩散剂、漂白精、硬脂酸、消泡剂、蛋白胨、硫化锌、磷酸铁、黄糊精、硫酸钾、磷酸铝、磷铁粉、雷米邦、氧化铅
- 主营：福美钠、漂白粉、次氯酸钠、电容器、强氯精、漂粉精、DOP、DBP、蛋白胨
- 主营：蛋白栋、DOP、玻璃粉、钛酸锶光催化电极材料、福美钠、黄糊精、硫酸钡、漂白粉、漂粉精、强氯精、优氯净、早强剂
- 主营：钛酸锶陶瓷电容器、福美钠
- 主营：蛋白胨、牛骨蛋白胨、福美钠、电容器、强氯精、单乙醇胺、三乙醇胺、氯化铜、水玻璃、防辐射硫酸钡
- 主营：元明粉、丙酸钙、玻璃粉、钛酸锶陶瓷电容器、冰醋酸、液压油、浮选油、草酸铵、生石灰、硅酸钠、单宁酸、胶泥粉、降阻剂、冰晶石、二萘酚、促进剂、熟石灰、三甘醇、大豆蜡、泡花碱、铵明矾、石英砂、丙二醇、edta四钠、edta二钠、维生素b1
- 主营：锚固剂、硫酸铝、硫酸铜、钛酸锶陶瓷电容器、切削液、氧化铜、溴化钠、大苏打、导热油、腐植酸、净洗剂、活性炭、水杨酸、硫酸锰、漂白粉、玻璃粉、茶皂素、丁酸钠、磷酸钙、甲酸钠、硬脂酸、消泡剂、酵母硒、磷酸铁、铵明矾、硫酸钡