AicaigouB2B Wiki

Cement Self-leveling Primer

Updated: 2026-08-20

Overview

Cement self-leveling primer is a polymer-based adhesive agent designed to improve bonding between substrates (e.g., concrete, plywood) and self-leveling underlayments. It penetrates porous surfaces to create a uniform, high-traction layer that prevents delamination. Widely used in commercial and industrial flooring systems, it addresses common issues like dusting, shrinkage cracks, and poor cement adhesion. Modern formulations often include acrylic or epoxy resins for enhanced performance.

Physical and Chemical Properties

The primer typically exhibits a milky white appearance with viscosity ranging from 500-2000 mPa·s. Its pH is usually alkaline (8-10) to match cement chemistry. After curing, it forms a flexible film with tensile strength exceeding 2 MPa. Key chemical characteristics include water resistance (after curing) and compatibility with Portland cement. Some variants contain silica sand or quartz fillers to increase surface roughness for mechanical interlocking.

Main Applications

Primary use cases include preparing old concrete floors before installing self-leveling overlays, especially in renovation projects where substrate conditions are variable. It's essential for achieving ANSI/ACI-compliant bond strength (>1.4 MPa). Other applications include moisture mitigation (when modified with hydrophobic agents) and as a tie coat for multi-layer flooring systems. In radiant heating installations, it ensures thermal stress resistance.

Safety and Storage

Uncured primer emits low VOCs (<50 g/L typically) but requires PPE including nitrile gloves and goggles. Avoid skin contact as alkaline components may cause irritation. Spills should be contained with absorbent materials. Storage life is typically 6-12 months in sealed containers. Freezing damages emulsion stability—thawed product should be discarded if separation occurs. Always follow manufacturer SDS guidelines for disposal.

B2B Procurement Guide

Industrial buyers should prioritize products with third-party certifications like ISO 9001 or CE marking. Key specifications to verify: bond strength (per ASTM C1042), drying time (usually 1-3 hours), and coverage rate (approximately 0.15-0.3 kg/m²). Bulk procurement (200+ kg drums) reduces costs by 10-20%. Consider regional suppliers for fresh inventory—long transport may shorten shelf life. Sample testing with your specific cement mix is strongly recommended.

Related Manufacturers