Overview
IS 2062 E350 C is a high-strength structural steel plate conforming to the Indian Standard IS 2062. It is widely used in industries requiring robust and durable materials, such as construction, shipbuilding, and heavy machinery manufacturing. The 'E350' designation indicates a minimum yield strength of 350 MPa, while 'C' refers to the impact test temperature of 0°C, ensuring toughness in moderate climates. This steel grade is known for its excellent weldability and formability, making it a preferred choice for structural applications.
Physical and Chemical Properties
IS 2062 E350 C steel exhibits a density of approximately 7.85 g/cm³, typical for carbon steels. Its melting point ranges between 1420-1460°C, and it is insoluble in water. The material's high tensile strength (450-600 MPa) and elongation properties (minimum 22%) make it suitable for load-bearing structures. The chemical composition includes elements like carbon (max 0.22%), manganese (1.50%), sulfur (max 0.045%), and phosphorus (max 0.045%). These components contribute to its mechanical properties and weldability, though the exact composition may vary slightly between manufacturers.
Main Applications
IS 2062 E350 C steel plates are extensively used in the construction of high-rise buildings, bridges, and industrial structures due to their strength and durability. They are also employed in shipbuilding for hulls and decks, where resistance to dynamic loads is critical. In the heavy machinery sector, this steel is used for manufacturing cranes, excavators, and other equipment requiring high load-bearing capacity. Its good weldability allows for complex fabrication, making it versatile for various engineering applications.
Safety and Storage
When handling IS 2062 E350 C steel plates, workers should wear appropriate protective gear, especially during cutting or welding, to avoid exposure to metal fumes. Proper ventilation is essential in confined spaces. Storage should be in a dry, well-ventilated area to prevent rust and corrosion. Plates should be stacked flat with adequate support to avoid deformation. Applying anti-rust coatings or using desiccants can further protect the material during long-term storage.
B2B Procurement Guide
When procuring IS 2062 E350 C steel plates, buyers should verify Material Test Certificates (MTC) to ensure compliance with IS 2062 standards. Key parameters to check include chemical composition, mechanical properties, and impact test results. Prices typically range between $600-$900 per ton, depending on order volume, supplier, and market conditions. It's advisable to source from reputable manufacturers or distributors with a track record of quality compliance. Buyers should also consider lead times and logistics, especially for large orders.
Related Manufacturers
- 主营：单片机、连接器、传感器、集成电路、放大器、电源管理、逻辑器件、存储器、继电器、射频无线、通信接口、电路保护、晶体管、接口IC、微控制器、解码器、处理器IC、存储
- 主营：集成电路、电子元器件
- 主营：纳芯微、川土微、新洁能
- 主营：汽车连接器、集成电路、外壳、端子、插头插座、电源、IC集成电路、开关、传感器、芯片、存储器、电子元件、附件、接线座、电容、电阻、电感