Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

BZX84B3V3

Updated: 2026-07-23

Overview

The BZX84B3V3 is a surface-mount Zener diode manufactured for voltage stabilization in low-power circuits. Part of the BZX84 series, it provides a precise 3.3V breakdown voltage with tight tolerance, commonly used as a voltage reference or protective component. Designed in a compact SOT-23 package, it suits space-constrained applications like mobile devices and IoT modules. Its silicon construction ensures reliability across industrial temperature ranges (-55°C to +150°C).

Structure and Working Principle

BZX84B3V3LT1G onsemi(安森美) SOT-23 稳压二极管 批次25+深圳市万佳城电子科技有限公司

The diode employs a PN junction doped to achieve the Zener effect at 3.3V. When reverse-biased, it conducts current only after reaching this threshold, maintaining near-constant voltage despite input fluctuations. Internal metallization and lead frames ensure low thermal resistance, while the epoxy molding provides mechanical protection. The SOT-23 package features three pins (anode, cathode, and no-connect for standardized mounting).

商家经验真实案例 · 安全可信
三dd15逆变器三极管并联
本文详细解析三dd15三极管在逆变器中的并联方法,包括参数匹配、电路连接和散热处理等核心要点,帮助读者实现稳定高效的并联应用。

Key Features

Precision voltage regulation (±2% tolerance variants available) and low dynamic impedance (10Ω typical) enable stable performance under load variations. Leakage currents remain below 0.1µA at voltages below the Zener threshold. The 225mW power dissipation rating requires attention to ambient conditions. Some manufacturers offer lead-free and RoHS-compliant versions for environmental regulations.

Application Areas

Primary uses include voltage clamping in USB power rails (3.3V logic protection), sensor interfaces, and battery-powered devices. It safeguards microcontrollers from transient spikes when placed in parallel with sensitive ICs. Industrial applications involve PLCs and instrumentation where stable references are critical. Automotive designs may utilize it for infotainment system protection, though AEC-Q101 qualified alternatives exist.

Maintenance and Precautions

BZX84B3V3-7-F 电子元器件 DIODES 封装SOT-23 批次23+深圳市杰兴伟业电子有限公司

Avoid exceeding the 225mW power limit (e.g., >68mA at 3.3V) to prevent thermal runaway. PCB layouts should minimize trace resistance between the diode and protected components. Storage should avoid high humidity (>60% RH) to preserve solderability. Reflow soldering profiles must adhere to JEDEC J-STD-020 guidelines for SOT-23 packages.

商家经验真实案例 · 安全可信
三极管放大交流信号
本文解析三极管放大交流信号的工作原理,包括偏置电路设置、信号输入输出过程以及关键参数选择,帮助理解电子电路中的信号放大机制。

B2B Procurement Guide

Major distributors stock BZX84B3V3 from brands like Nexperia, ON Semiconductor, and Diodes Inc. MOQs typically start at 3,000 units for reel packaging (3,000 pieces per reel). Verify datasheet parameters like temperature coefficient (typically +2mV/°C) and long-term stability if used in metrology applications. Consider automotive-grade BZT52H-B3V3 for harsh environments.

Related Manufacturers