Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

BZX55C2V7

Updated: 2026-07-18

Overview

The BZX55C2V7 is a popular Zener diode designed for voltage regulation applications. As part of the BZX55 series, it provides a stable 2.7V reference voltage when operated in its reverse breakdown region. This component is particularly valued in electronic circuits where precise voltage references are needed, such as in power supplies, sensor interfaces, and protection circuits. Its compact DO-35 glass package makes it suitable for space-constrained applications while maintaining good thermal characteristics.

Structure and Working Principle

RBQ30T65A AME8838AEIV330Z AME8807AEHAZ BA05SFP-E2深圳万成佳业电子有限公司

The BZX55C2V7 consists of a silicon PN junction specifically doped to achieve a sharp breakdown characteristic at 2.7V. When reverse-biased below this voltage, it behaves like a normal diode with minimal leakage current. Upon reaching the 2.7V threshold (Zener voltage), the diode enters breakdown and maintains this voltage across its terminals despite changes in current. This regulation occurs through either Zener effect (for voltages below 5V) or avalanche breakdown mechanisms, providing stable reference voltages for electronic circuits.

商家经验真实案例 · 安全可信
贴片电容烧坏:开路还是短路
贴片电容烧坏后可能呈现开路或短路状态,取决于损坏机制。本文解析两种故障模式,帮助理解不同场景下的表现差异。

Key Features

The BZX55C2V7 offers several advantageous characteristics for voltage regulation applications. Its nominal voltage of 2.7V has a typical tolerance of ±5%, providing reasonably precise voltage references. The diode features a power dissipation rating of approximately 500mW and can handle surge currents briefly exceeding its continuous rating. Its temperature coefficient is relatively stable, and the component maintains consistent performance across a wide operating temperature range from -65°C to +200°C.

Application Areas

This Zener diode finds extensive use in various electronic systems. Common applications include voltage regulation in low-power DC circuits, voltage reference for analog circuits, and protection against voltage spikes. In power supply designs, multiple BZX55C2V7 diodes can be combined to create different reference voltages. They're also used in waveform clipping circuits, voltage monitoring systems, and as inexpensive voltage references in consumer electronics and industrial control systems.

Maintenance and Precautions

集成电路IC BZX55C2V7 ST(先科) DO-35 稳压二极管 原装芯片深圳市金华洋世纪科技有限公司

Proper handling of the BZX55C2V7 ensures optimal performance and longevity. The diode should be operated within its specified power dissipation limits, calculated as voltage across the diode multiplied by current through it. Heat sinking may be necessary for applications approaching maximum ratings. Avoid subjecting the glass package to mechanical stress, and when soldering, keep temperatures below 300°C for no more than 10 seconds to prevent damage to the semiconductor junction.

商家经验真实案例 · 安全可信
二极管三极管的作用
本文解析二极管与三极管在电路中的核心功能,包括单向导电、信号放大与开关控制等基础原理,并通过日常电子设备案例说明其应用场景,帮助读者理解这两种元件的关键价值。

B2B Procurement Guide

When sourcing BZX55C2V7 diodes for business use, consider both technical and commercial factors. Verify voltage tolerance specifications match your application requirements, as tighter tolerance versions may be available at higher cost. For volume purchases, request manufacturer's certification and reliability data. Lead times can vary, so plan procurement accordingly. Consider alternative part numbers from different manufacturers that offer equivalent specifications, which can provide supply chain flexibility.

Related Manufacturers