Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

BSS138AKAR

Updated: 2026-07-22

Overview

The BSS138AKAR is a popular N-channel MOSFET designed for low voltage applications. Manufactured by various semiconductor companies, this component is widely used in consumer electronics, industrial controls, and power management systems. Its compact SOT-23 package makes it suitable for space-constrained designs. As an enhancement mode MOSFET, it requires a positive gate-to-source voltage to conduct current. The BSS138AKAR is particularly valued for its fast switching characteristics and low power consumption, making it ideal for battery-powered devices and high-frequency applications.

Structure and Working Principle

线路板回收 大量收购各种带ic 带电子元器件线路板材 镀金板深圳市辰信浩再生资源有限公司

The BSS138AKAR consists of three terminals: gate (G), drain (D), and source (S). The device operates by creating a conductive channel between drain and source when sufficient voltage is applied to the gate terminal. The threshold voltage (VGS(th)) is typically around 1.5V, allowing for compatibility with low-voltage logic circuits. Internally, the MOSFET features a vertical structure with a metal-oxide-semiconductor gate that provides excellent input impedance. The low on-resistance (RDS(on)) of about 3.5Ω ensures minimal power loss during conduction, while the fast switching times (in nanoseconds) enable efficient high-frequency operation.

商家经验真实案例 · 安全可信
2100kva变压器电流
本文解析2100kVA变压器的额定电流计算方法,同时探讨配套变电站的配置要点,帮助读者理解大容量电力设备的核心参数与系统匹配关系。

Key Features

Key specifications include a maximum drain-source voltage of 50V and continuous drain current of 220mA. The device offers a power dissipation of about 360mW and operates effectively in temperature ranges from -55°C to +150°C. The MOSFET's ESD protection (typically 2kV HBM) provides robustness against static discharge, though proper handling procedures should still be followed. Its small signal characteristics make it particularly suitable for analog switching applications and level shifting in mixed-voltage systems.

Application Areas

Primary applications include load switching in portable electronics, signal routing in communication devices, and power management in IoT products. The BSS138AKAR is commonly found in smartphones, tablets, and wearable devices where space and power efficiency are critical. In industrial settings, it's used for interface circuits, relay drivers, and small motor controls. The component also serves well in battery management systems, particularly for low-current switching and protection circuits.

Maintenance and Precautions

库存IC芯片回收 全国上门SMT贴片 现场结算 创鸿欣利用电子元件深圳市创鸿欣二手机械设备有限公司

When handling BSS138AKAR MOSFETs, use proper ESD protection measures including grounded workstations and wrist straps. Avoid applying voltages beyond the absolute maximum ratings to prevent device failure. For soldering, follow recommended temperature profiles (typically 260°C for 10 seconds maximum). Storage should be in dry, anti-static packaging with controlled humidity. In circuit design, ensure proper gate drive circuitry to achieve full enhancement and prevent partial conduction.

商家经验真实案例 · 安全可信
合肥注册公司
本文将详细介绍在合肥注册公司的流程、所需材料及注意事项,帮助创业者高效完成公司注册,避免常见问题。

B2B Procurement Guide

When sourcing BSS138AKAR MOSFETs, verify the manufacturer's authenticity and request certificates of compliance. Consider minimum order quantities (MOQs) which typically range from 1,000 to 10,000 units for competitive pricing. Check for alternative part numbers from different manufacturers that may offer equivalent specifications. For reliability-critical applications, request full datasheets and consider purchasing from authorized distributors rather than spot market sources. Lead times generally range from 4-12 weeks depending on market conditions.

Related Manufacturers