Overview
Bromodichloromethane (BDCM) is a trihalomethane (THM) formed as a byproduct during water chlorination. Its detection is essential for water utilities, environmental agencies, and industries to comply with drinking water regulations (e.g., EPA limits BDCM to 80 μg/L). Modern detection methods include gas chromatography with electron capture detection (GC/ECD), purge-and-trap GC/MS, and colorimetric test kits. Laboratories typically follow standardized protocols like EPA Method 551.1 or ISO 10301 for accurate quantification.
Physical and Chemical Properties
BDCM is a dense, volatile liquid with a sweet odor. Its low water solubility (0.8 g/L at 20°C) and high vapor pressure (62 mmHg at 25°C) make it prone to evaporation, requiring sealed sampling containers. As a halogenated hydrocarbon, BDCM reacts with strong oxidizers and alkaline metals. Its stability in water depends on pH and temperature, with longer half-lives in cooler, neutral conditions. These properties dictate sampling protocols and preservation methods (e.g., acidification with HCl).
Main Applications
Primary applications include drinking water quality monitoring (mandatory in many countries for THM testing), wastewater treatment plant effluent analysis, and swimming pool water surveillance. Industrial uses include process water monitoring in food/beverage production and pharmaceutical manufacturing where chlorine disinfection is employed. Environmental scientists also test for BDCM in groundwater near chlorinated spill sites or landfills.
Safety and Storage
BDCM is classified as a possible human carcinogen (IARC Group 2B). Always use NIOSH-approved respirators with organic vapor cartridges and chemical-resistant gloves (nitrile or neoprene) during handling. Store standard solutions in amber glass bottles with PTFE-lined caps at 4°C. Field samples must be chilled to 4°C and analyzed within 14 days, preserved with 25 mg/L ascorbic acid to prevent further THM formation.
B2B Procurement Guide
When procuring BDCM detection services or equipment, prioritize suppliers with ISO 17025 accreditation for water testing. Key considerations include method detection limits (MDL ≤ 0.1 μg/L for compliance monitoring), throughput capacity (automated systems for high-volume labs), and CRM availability for quality control. For field testing equipment, evaluate portability, interference resistance (especially from other THMs), and data logging capabilities. Service contracts should include regular calibration verification and participation in proficiency testing programs like ELAP.
Related Manufacturers
- 主营：稀释剂、金属防锈油、化工切削润滑剂、溴二氯甲烷、金属切削润滑剂、天那水、慢干水、开油水、快干水、脱胶水、切削油、除蜡水、铜板水、退镀液、白矿油、环己酮、混丁醇、导轨油、液压油、三氯乙烯、异丙醇、CAC
- 主营：杀虫剂、制冷剂、异丙醇、二氯甲烷、防腐剂、二甲苯、清洁剂、清洗剂、干洗剂、醋酸丁酯、生物燃料、食用香料、四氢呋喃、反应介质、乙酸乙酯、四氯乙烯、抗氧化剂、涂料稀释剂、发酵催化剂、能源储存介质、甲基异丁基甲酮暂无推荐商品
- 主营：丙二醇、醋酸丁酯、二丙酮醇、单乙醇胺、四氢糠醇、二价酸酯、甲基丙烯酸羟乙酯、腰果酚、异氟尔酮、丙烯酸、二乙二醇丁醚、乙醇、妥尔油、三乙二醇、磷酸、碳酸丙烯脂、二丙二醇甲醚、二甲基亚砜、邻苯二甲酯二甲酸、轻质石油醚、溶剂油、二甲基甲酰胺、N甲基二乙醇胺
- 主营：丙三醇、二乙二醇丁醚、工业合成中间体
- 主营：化学实验检测、分析纯试剂
- 主营：一溴二氯甲烷标准溶液、分析纯试剂
- 主营：直链淀粉标准溶液、支链淀粉标准溶液、环氧乙烷标准溶液、2020药典纯化水检测试剂、碱性碘化汞钾标准溶液、土壤易溶盐、嗅辨考核液、可见异物标准物质、玻璃微珠粒度、土壤标准物质、溶液标准物质、铝土矿标准物质、氯化钠渗透压、苯甲酸标准物质、微粒标准物质
- 主营：生物活性玻璃、全氟三丁胺、花椒麻素、2-十一酮、二羟基丙酮、光引发剂、乙酸龙脑酯、羟基磷灰石
- 主营：药物杂质标准品、对照品、中药对照药材、药品检测标准品、仪器检测校准品、食品检测标准物质、有机检测标准溶液、中药农残空白基质、分析标准品、金属离子标准溶液、滴定溶液、指示液、缓冲液、电导率溶液、PH标准溶液、熔点标准品、国家标准物质、比色液
- 主营：硫酸汞、硝酸汞、雷尼镍、一溴二氯甲烷标准溶液、二十烷、丁二酸、硫化银、正己醇、硫酸镉、铋酸钠、苯甲醇、硅酸钠、正辛酸、硫酸镁、磷钨酸、滑石粉、草酸锡、蓖麻油、椰子油、钒试剂、异辛醇
- 主营：酸度调节剂、丙二醇甲醚、无水乙醇、二氯甲烷、航空煤油、异丙醇、二甲苯、DMF、正庚烷、乙酸乙酯、冰醋酸、三氯乙烯
- 主营：二乙二醇丁醚、丙二醇甲醚、酒精、乙醇
- 主营：抗氧剂、黄血盐钠、红丹粉、黄丹粉、黄血盐钾、螯合铁、硫酸钙晶须、福美钠、乙硫氮、环氧大豆油、EDTA-2Na、EDTA-4Na、羊毛脂、芳烃、聚乙二醇、加益粉、AEO、AES、阻聚剂701、衣康酸、油酸钠、亚油酸钠、光稳定剂770、紫外线吸收剂UVP
- 主营：抗氧剂
- 主营：二甲苯、辛醇国标、邻苯二甲、环氧丙烷、涂料油墨、松香天然、丙二醇甲醚、乙二醇乙醚、过硫酸铵、偶氮二异丁腈、苯酚、顺酐、苯酐、乙二醇甲醚醋酸酯、间二甲苯、甲基异丁基甲酮、甲基丙烯酸甲酯、乙腈、环己酮、环氧树脂、过硫酸钠、氢氧化钾、乙醇