Aicaigou LogoAicaigou LogoB2B WikiIndustrial Encyclopedia

BC847CWSOT-323

Updated: 2026-08-10

Overview

The BC847CW SOT-323 is a surface-mount NPN transistor designed for general-purpose amplification and switching. Part of the BC847 series, it offers a balance of performance and compactness, making it suitable for space-constrained PCB designs. Its SOT-323 package (1.7mm × 1.3mm) is 60% smaller than the traditional SOT-23, ideal for modern miniaturized electronics. As a bipolar junction transistor (BJT), it operates with a collector current (IC) of up to 100mA and a collector-emitter voltage (VCEO) of 45V. The device is RoHS-compliant and widely used in consumer electronics, IoT devices, and automotive modules due to its reliability and cost-effectiveness.

Structure and Working Principle

BC847CWQ 电子元器件 DIODES/美台 封装SOT-323深圳市芯锐华科技有限公司

The BC847CW consists of three semiconductor layers (N-P-N) with emitter, base, and collector terminals. When a small current flows through the base-emitter junction, it controls a larger current between the collector and emitter, enabling amplification or switching. The SOT-323 package uses copper leadframes for improved thermal conductivity. Key internal features include a thin base region for high current gain (hFE typically 200–450) and optimized doping profiles to minimize saturation voltage (VCE(sat) < 0.6V at IC=100mA). The compact package design reduces parasitic inductance, enhancing high-frequency performance up to 100MHz transition frequency (fT).

商家经验真实案例 · 安全可信
带电容吊扇接线口是L0
本文解答带电容吊扇的接线问题,详细解释L0接线口的作用及正确接线方法,帮助读者安全完成吊扇安装。

Key Features

1. **High Current Gain**: hFE of 200–450 ensures efficient signal amplification with minimal base current. 2. **Low Saturation Voltage**: VCE(sat) below 0.6V reduces power loss in switching applications. 3. **Miniature Footprint**: SOT-323 package saves PCB space compared to SOT-23. 4. **Broad Compatibility**: Works with 3V–5V logic systems, suitable for interfacing with microcontrollers. 5. **Thermal Stability**: Operating temperature range of -55°C to +150°C accommodates harsh environments. These features make the BC847CW ideal for load switching, LED drivers, and audio pre-amplifiers where space and efficiency are critical.

Application Areas

1. **Consumer Electronics**: Used in smartphones, tablets, and wearables for power management and signal conditioning. 2. **Industrial Controls**: Interfaces sensors and actuators in PLCs and motor drives. 3. **Automotive Systems**: Employed in lighting controls and infotainment modules (AEC-Q101 qualified variants available). 4. **IoT Devices**: Enables low-power switching in smart home sensors and wireless modules. In audio circuits, it serves as a pre-amplifier for microphone signals, while in digital systems, it acts as a level shifter or GPIO expander. Its robustness also suits battery-operated devices requiring extended runtime.

Maintenance and Precautions

BC847CW,115 三极管 NEXPERIA/安世 NPN型 双极晶体管 45V SOT-323东莞市鑫沐电子有限公司

1. **ESD Protection**: Handle with anti-static precautions; SOT-323’s small size increases ESD sensitivity. 2. **Soldering**: Use reflow profiles per JEDEC J-STD-020 (peak temperature ≤ 260°C). Hand soldering requires fine-tip irons (<300°C). 3. **Derating**: Avoid exceeding 100mA IC or 45V VCEO; derate power dissipation above +25°C. 4. **Layout**: Place decoupling capacitors near collector terminal to suppress noise in RF applications. For thermal management in high-current designs, connect multiple vias to the PCB’s ground plane under the device. Verify footprints match SOT-323 dimensions (1.7mm × 1.3mm) to prevent tombstoning.

商家经验真实案例 · 安全可信
LED灯白线与黑线区别
本文解析LED灯接线中白线与黑线的功能差异,包括极性识别、安全规范及常见误接后果,帮助读者正确区分和安装LED灯具。

B2B Procurement Guide

1. **MOQ**: Typical minimum order quantities range from 3,000 to 10,000 units; negotiate pricing tiers for >50k units. 2. **Lead Time**: 6–8 weeks for standard orders; expedited options may cost 15–20% more. 3. **Certifications**: Request RoHS/REACH compliance documentation; some suppliers offer AEC-Q101 grades. 4. **Packaging**: Tape-and-reel (3,000 units per reel) is standard; bulk trays available for prototyping. Compare datasheet parameters (e.g., hFE grouping) across manufacturers like Nexperia, ON Semiconductor, and Diodes Inc. For automotive projects, confirm PPAP and IATF 16949 compliance. Sample testing is recommended to verify batch consistency.

Related Manufacturers